xiaomi M2111E1 Buds 3 Star Wars Edition User Guide
- June 14, 2024
- Xiaomi
Table of Contents
Xiaomi M2111E1 Buds 3 Star Wars Edition
Product Overview
Read this quick start guide carefully before use, and retain it for future reference.
Illustrations of the product, accessories, and user interface in the Quick Start guide are for reference purposes only. Actual products and functions may vary due to product enhancements.
Package Contents
Instructions
Charging
Charging the earphones When the earphones are placed in the charging case,
they will automatically start charging.
Charging the charging case
Use the Type-C charging cable to charge the charging case, or place it on a
compatible wireless charger with the indicator of the charging case facing
upwards. The indicator is red while charging, and turns green when the
earphones and the charging case are fully charged. The center of the wireless
charger must be aligned with the center of the charging case in order to
charge, which is about 15 mm right below the Xiaomi logo on the back of the
charging case. The charging case’s indicator will be lit while charging.
Note : Only use certified Qi-compatible chargers.
Turning On
When opening the charging case, the earphones will automatically turn on.
Sleep Mode
Place the earphones back into the charging case and close the lid, the
earphones will disconnect and go into sleep mode automatically.
Wearing
Take the earphones out of the charging case, and insert them into your ears
according to the (L) and right (R) marks.
Note: After using the earphones, place them back into the charging case. This will extend their lifespan and help you avoid losing or misplacing them.
Connecting
Connecting the earphones to a new device
- Make sure that the earphones are placed in the charging case, and press and hold the function button for two seconds when the charging case’s lid is opened.
- The indicator will start blinking white to indicate that the earphones are awaiting a connection.
- If the earphones are not connected for one minute, they will enter the sleep mode and the indicator will turn off.
- Enable the device’s Bluetooth, then search for and connect to the “Xiaomi Buds 3 Star Wars”. If a passcode is requested, enter “0000”.
Note
Before using the earphones for the first time, please place them into the
charging case and press and hold the function button for five seconds to
activate them. Once activated, the earphones will automatically enter the
awaiting connection state.
Clearing connection history
- Place the earphones into the charging case.
- Press and hold the charging case’s function button for at least 10 seconds, and release it once the indicator stays white.
- The earphones have been reset, and the connection history has been cleared. The charging case’s indicator blinks white, and the earphones are in pairing mode again.
Note: Due to the connection characteristics of the Bluetooth signal, in dense environments with 2.4 GHz electromagnetic signal interferences, there may be occasional disconnects or no sound.
Function Overview
Incoming calls
Pinch the force sensor area on either side of the earphones: Answer/end a call
Double-pinch the force sensor area on either side of the earphones: Decline a
call Music and voice assistant
While wearing both earphones
- Pinch the force sensor area: Play/pause
- Double-pinch the force sensor area: Next track
- Triple-pinch the force sensor area: Previous track
- Press and hold the force sensor area for two seconds to cycle through: Enable noise cancellation >
- Transparency mode > Disable noise cancellation
- Take out either earphone: Pause music and wear the earphone back to resume playing
While wearing one earphone
Pinch the force sensor area: Play/pause
Notes
- When only using one earphone, place the other into the charging case and close the lid.
- Noise cancellation mode cannot be set to on in single earphone mode.
Specifications
- Name: Wireless Earphones
- Model: M2111E1
- Earphone Input: 5 V 0.08 A
- Charging Case Input: 5 V 0.5 A
- Charging Case Output: 5 V 0.2 A
- Wireless Connectivity: Bluetooth® Low Energy 5.2
- Supported Audio Codecs: SBC/AAC
- Bluetooth Operation Frequency: 2402–2480 MHz (for EU)
- Maximum Transmit Power for BT: <20 dBm (for EU)
- Maximum Transmit Power for BLE: <13 dBm (for EU)
- Wireless Charging Operating Frequency: 110-205 kHz
- Operating Temperature: 0 °C to 45 °C
- Storage Temperature: -20 °C to 45 °C
- Storage Humidity: 5%–95% RH
The Qi logo is a registered trademark of the Wireless Power Consortium. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.
WEEE Information
All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as the terms and conditions of such collection points.
Hereby, Tiinlab declares that the radio equipment type M2111E1 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://www.mi.com/global/service/support/declaration.html Hereby, Tiinlab declares that the radio equipment type M2111E1 is in compliance with Radio Equipment Regulations 2017. The full text of the UKCA declaration of conformity is available at the following internet address: https://www.mi.com/uk/service/support/declaration.html
Warning
- Do not expose the product to environments with a temperature that is too low or too high (below 0°C or above 45°C).
- Do not use this product during thunderstorms. Thunderstorms may cause the product to malfunction and increase the risk of electric shocks.
- Do not clean this product with alcohol or other volatile liquids.
- Avoid any contact with liquids.
- Do not use the earphones while driving, and comply with the relevant regulations in your region or country.
- Keep the product’s indicator away from the eyes of children and animals while the product is in use.
- Do not disassemble, puncture, or crush the product nor expose it to fire.
- To prevent possible hearing loss, do not use this product at high volume for long periods of time.
- These earphones and their accessories may contain small parts. Please keep them out of the reach of children.
- Disposal of a battery into a fire or a hot oven, or mechanically crushing or curing of a bakery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
- A bakery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
- Product information and certification marks are located in the charging case.
- The symbol indicates DC voltage.
The product has a built-in battery that can not be removed or replaced. To avoid damage to the battery or the product, do not disassemble or modify the battery by yourself. The battery can only be replaced by authorized service providers and must be replaced with the same type. Replacement of a battery with an incorrect type may defeat a safeguard (such as catching fire, explosion, and leakage of corrosive electrolyte). Do not put the battery in the trash that is disposed of in landfills. When disposing of the battery, comply with local laws or regulations. Stop using the product immediately if there is any swelling.
CAUTION
There is a risk of explosion if the battery is replaced incorrectly. Only use
and replace with the same or an equivalent type of battery. This device is in
compliance with Specific Absorption Rate (SAR) limits for general
population/uncontrolled exposure
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg
SAR Value: Head: 0.54 W/Kg (0 mm distance)
In some countries, the SAR limit is 1.6 watts per kilogram averaging over 1
gram of tissue for use against the head, and body, and 4.0 watts per kilogram
averaging over 10 grams of tissue for use on the wrist. In other countries,
the SAR limit is 2.0 watts per kilogram averaging over 10 grams of tissue for
use against the head, and body, and 4.0 watts per kilogram averaging over 10
grams of tissue for use on the wrist.
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Tiinlab Corporation (a Mi Ecosystem company)
Address: No. 3333, Liuxian Avenue, Tower A, 35th Floor, Tanglang City, Nanshan
District, Shenzhen, China
For further information, please go to www.mi.com
Quick Start Guide Version: V2.0
Importer: Beryko s.r.o.
Pod Vinicemi 931/2, 301 00 PIzeñ
www.beryko.cz
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>