realme Pad 2 RMP2205 WIFI User Manual
- June 15, 2024
- realme
Table of Contents
- realme Pad 2 RMP2205 WIFI
- User Manual
- Standard accessories
- Specification
- Statement
- Security information
- Battery precautions in use
- Other matters of attention
- Waste Electrical and Electronic Equipment (WEEE)
- FCC Regulatory Conformance
- Human Exposure restrictions Information (SAR)
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
realme Pad 2 RMP2205 WIFI
User Manual
Read this user manual carefully before using the product, and store it in a safe place.
Greetings from realme Pad 2
This manual will show you how to use the pad and its important functions. You
may also visit realme official website to get more information about the pad.
- Volume button
- Power button Speaker
- Microphone
- Front camera
- Rear camera
- Light sensor
- Touch screen
- TF card tray
- USB-C connector
Warning
- Do not place the tablet or battery near or inside heating equipment, cooking equipment, high pressure vessels (such as microwave ovens, induction cooker, electric oven, heater, pressure cooker, water heater, gas stove, etc.) to prevent the battery overheating which may lead to an explosion.
- The original charger, data cable and battery shall be used. Unapproved charger, data cables, or batteries that are not certified by the manufacturer may result in electric shock, fire, explosion, or other hazards.
- When charging, please place the device in environment that has a normal room temperature and good ventilation. It is recommended to charge the device in an environment with temperature ranging from 5℃~35℃.
- The battery can not be removed from the device, if you need to replace, please contact realme Authorized Service Center.
Standard accessories
You are provided with the following standard accessories: Pad x 1, Charger x 1, Data Cable x 1, Warranty Card x 1 , User Manual x 1, SIM Pin x 1.
This product is conformed to High-Resolution Audio standard defined by Japan Audio Society. The High-Resolution Audio logo is used under license from Japan Audio Society.
Specification
Product | RMP2205 |
---|---|
Main screen parameter | 29.2cm (11.5″) |
Dimension | 268.2×168.5×7.2 (mm) |
Battery |
- 8080mAh/31.27Wh(Min)
- 8360mAh/32.35WH(Typ)
Camera|
- Rear: 8Megapixels
- Front: 5Megapixels
Operating temperature| 0℃~35℃
SAR Values| FCC SAR| X.XXX W/KG(Body)
Radio Waves Specifications
Radio| Frequency| Max. Output Power
Bluetooth| 2.4 ~ 2.4835GHz| 15.7dBm(EIRP)
2.4G Wi-Fi| 2.4 ~ 2.4835GHz| 20.7dBm(EIRP)
5G Wi-Fi| 5.15 ~ 5.25GHz| 20dBm(EIRP)
5.25 ~ 5.35GHz| 20.8dBm(EIRP)
5.47 ~ 5.725GHz| 23dBm(EIRP)
5.725 ~ 5.85GHz| 22.4dBm(EIRP)
This user manual provides the product safety information.
Before using the tablet, please read the Safety Guide carefully.
Statement
The User Manual contains information regarding safety, operation and customer service. Before using the realme Tablet, please read all the instructions and the security information below, and keep it for backup. More detailed instructions are kept in this product as an electronic file. Please read the built-in instructions on the realme Tablet. For the latest information, please visit https://www.realme.com.
Security information
- This tablet is suitable for working in an environment of 0°C to 35°C. Temperature for storage should be between -20°C and 45°C.
- even damage the tablet and battery. When using this tablet, please machines.
- Please charge this tablet in an environment between 5°C and 35°C, so as not to reduce battery performance and standby time. If the tablet has a flash charging function, it may not be able to enter the flash charging mode when the temperature is below 15°C or over 35°C.
The operating system of this product supports official system updates. If the user rooted the ROM system of any third party or modified the system file by cracking, it may lead to security risks of the system. realme will not provide any support nor take any responsibility for the final use in these cases.
Battery precautions in use
- Please do not weld battery terminals. Otherwise, it may cause battery leakage, overheat, explosion and fire.
- Please do not press or pierce the battery with hard objects (for example needle or other sharp objects), to avoid damage, battery leak, overheating or fire.
- Battery liquid may be harmful if contacted with skin or clothes, your skin might be hurt. Please immediately wash it with water, or go to hospital at once to seek medical help if necessary.
- If there are any abnormalities like high temperature, discoloration, distortion, bulging, leakage, etc. during operation, charging or preservation, please cease to use the device.
- Do not expose the battery liquid to eyes. It might cause potential blindness. When happens, wash your eyes immediately or go to the hospital if serious.
- Do not disassemble or modify the battery, as it may cause battery leakage, overheating, explosion or fire.
- Do not place or use the battery near fire, heater or other high temperature places. Otherwise, it may cause battery leakage, overheat, explosion or fire.
- If there is battery leakage or strange smell, please immediately move it from open flame in order to avoid fire or explosion.
- Please keep the battery away from moist or wet areas from moisture. Otherwise, it may cause battery overheat, fuming and corrosion.
- Do not place the battery directly in sunlight, or other high temperature areas. Otherwise, battery leakage and overheating may temperature areas. Otherwise, battery leakage and overheating may make battery performance descend and service life affected. Keep the battery in a well-ventilated area.
- Do not use the battery or connect it with a high-voltage power supply, otherwise it may cause a short circuit or burst.
- The battery can be charged and discharged hundreds of times at least, but it will eventually wear out.
- Do not dispose the battery as household waste. Dispose the battery according to local regulations.
Caution : Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the user manual.
Warning : Please do not charge the battery over 12 hours.
Other matters of attention
- Adapter shall be installed near the equipment and shall be easily accessible.
- If any part of the product is cracked or damaged, discontinue use immediately and contact the realme Service Center.
To prevent possible hearing damage, do not listen at high volume levels for long periods.
Waste Electrical and Electronic Equipment (WEEE)
This symbol means that according to local laws and regulations your product and/or its battery shall be disposed of separately from household waste. When this product reaches its end of life, user has the choice to give his product to a competent recycling organization. Proper recycling of your product will protect human health and the environment.
- realme will seek shared responsibility and cooperation from customers in reducing the environmental impact of their products.
- realme will comply with all the applicable laws related to WEEE management.
FCC Regulatory Conformance
FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference;
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Caution:
- Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Human Exposure restrictions Information (SAR)
- This product is in compliance with SAR for uncontrolled environment/ general population exposure limits Body-worn SAR limit is 1.6W/kg, limbs SAR limit is 4.0W/kg.And please see the “User Manual” to find the highest SAR value.
- If you are using medical or similar devices such as cardiac pacemakers, hearing aids, cochlear implants, etc., please use this product according to the instructions of your doctor.
- For body-worn operation, this product has been tested and meets the human exposure when used with any accessory that contains no metal and that positions the device a minimum of 0mm from the body. Use of other accessories may not ensure compliance with the human exposure limits.
P201-CD4008-000
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>