PURE TECH F-016 Pet Water Fountain User Manual
- June 5, 2024
- PUTE TECH
Table of Contents
- PURE TECH F-016 Pet Water Fountain
- Important Safety Information
- What’s in The Box
- Learn about Your Fountain
- How The Fountain Works
- Important Safety Information
- Learn about Your Fountain
- Learn about Your Fountain
- How to Use
- Operations
- How to Clean
- Precautions
- Terms of Use & Limitation of Liability
- Certification Statements
- Cleaning And Maintenance
- FAQ
- Certification Statements
- Specifications
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
PURE TECH F-016 Pet Water Fountain
Important Safety Information
Warning: This equipment is not recommended for pets under 3 months old.
Caution: Please use the original USB power cable, otherwise it will
damage the device or cause safety hazards.
This product is a low-voltage product, but pets biting on the cable will still
cause electrical leakage. Please guide your pets properly.
If the water in the product is not consumed for a long time, the water must be
changed in time. Please make sure the pet’s drinking water is clean, non-toxic
and harmless.
Keep it level and do not knock over the product, otherwise it will cause the
equipment to malfunction or spill water.
What’s in The Box
- Pet Water Fountain
- Power Cable 1.5m
- Filter
- User Manual
All the main plastic parts of this product are food-grade plastic and BPA-free materials.
Learn about Your Fountain
Features
How The Fountain Works
The Basic Principles of Purification
Three Filter Media
- The Microporous non-woven fabric: Filters large particle impurities.
- Coconut shell activated carbon: Removes residual chlorine and foreign matter.
- Cation Exchange Resins:
- Removes heavy metal ions in water and soften the water quality.
Filter life cycle
- Replace in 2 weeks in N mode. Replace in 4 weeks in S mode.
- The service life of the filter element will be different according to the specific usage and the quality of the water source.
Principle of Living Water Cycle
The ultra-quiet water pump realizes the function of water circulation. Flowing
water not only helps keep the water clean, but also attracts pets’ attention
and encourages pets to drink water in time.
Important Safety Information
Explanation of Attention Words and Symbols
Note: This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages that follow this
symbol to avoid possible injury or death.
WARNING indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous
situation which, if not avoided, could result in minor or moderate injury.
CAUTION, without the safety alert symbol, is used to address practices
not related to personal injury.
NOTICE is used to address practices not related to personal injury.
PROHIBITED indicates that the operation is prohibited .
EXCLAMATION MARK some information that requires additional attention.
Caution:
If children use this product, please make sure to Tushie si t uprnoddeur
tcht e cgauni daonnclye ofif laten r adduriltn.king water, please do not place
other pet beverage products or other non-pure water liquids in the fountain.
Please use this product in an indoor environment.
When the product contains water, the indoor ambient temperature cannot be
lower than 0°C (33.8 F). Otherwise, freezing will damage the product.
This product is forbidden to be washed in a dishwasher.
When not using the product for a long time, please unplug the power supply,
empty the water in the bucket, and store it properly.
In order to provide better products, we regularly carry out product
improvements. The actual product may be different from the package picture.
Please refer to the actual product.
Learn about Your Fountain
Introduction of Components
- Water Tray
- Hair Blocker
- Filter
- Top Cover
- DC Socket
- Muffler Sponge
- Cover Bracket
- Filter Sponge
- Aqueduct
- Water Pump
- Pump Cover
- Bucket
- Cable Buckle
- Smart Mode Indicator
- Touch Button
- Normal Mode Indicator
- Water Drain
- Cable Slot
- Aqueduct Connection
- Cable Slot
- DC Head
- USB Terminal
Learn about Your Fountain
Introduction of Main Features
Plug~Play & One Touch Button
- Power Switch: The power connector is the power switch, this product is plug and play.
- Mode Switch: Double-Touch to switch the working mode; Long-Touch to manually flush hair.
Two Working Modes
- Normal Mode (N): This is a continuous working mode, with uninterrupted water output. It is the default mode and automatic flush hair every half an hour.
- Smart mode (S): This is a power-saving mode, with a 1 minute pause every 6 minutes, and automatic flush hair after 5 cycles.
Water Shortage Alarm.
When the bucket is at a low water level or no water, the N and S indicator
lights will flash at the same time to indicate water shortage.
How to Use
Unpacking and Assembly
After unpacking, please first confirm the accessories match the item list.
After confirmation, please read the manual and the quick use guide card
carefully.
-
Take out the filter, muffler sponge, and pump filter sponge, and rinse them.
NOTICE: The filter element needs to be rinsed before use to wash off the activated carbon powder. -
Lift the water tray with fingers along the edge of the water tray, first put in the muffler sponge, and then place the filter face up in the filter compartment.
-
Unpack the power cable, insert the DC head into the DC Socket of the product, and fix the cable to the cable buckle at the lower end of the basin. The other end can be connected to any USB socket.
-
Align the DC head and the cable buckle in the vertical direction. The product is assembled.
First Use & Water Collecting
First Use
Please clean the product thoroughly when using it for the first time. See
page 13~15 for the cleaning method.
Water Collecting
You can take the entire fountain to the water source to collect water, or
only the bucket to collect water.
- Unplug the DC head, remove the top cover and place it on a clean surface.
- Fill the bucket to the maximum water level with water.
- Put the top cover on the bucket, and align the DC head with the cable buckle at the bottom of the bucket. (If necessary, wipe the bottom of the top cover bracket).
Caution: Do not use hot water above 46°C (114.8 F). Only for household tap water or bottled drinking water.
Operations
Switch Mode
Double-touch the touch button to switch between the normal mode (N) and the
smart mode (S). The double-touch interval is less than 1 second and
accompanied by a sound prompt.
Manual Hair Flushing
Press and hold the touch button for 5 seconds to start the hair flushing
function. The hair flushing function lasts for 15 seconds. If it is not cleaned
once, please repeat the operation until the hair is cleaned from the water
tray.
Water Shortage Alarm
When the water level drops to a low level, the N/S indicator will flash
simultaneously. Please check the water level regularly so that you can refill
the water for pets in advance.
Automatic Hair Flushing
In the N mode, it will automatically flush once every half hour; in the S
mode, it will automatically flush once after every 5 times of output water.
Placement of Fountain
Choose an ideal location in the room to place the fountain. The placement
surface should be level and away from other household appliances.
Power Connection
Insert the USB terminal into any USB port and fix the power cable to the
bottom of the bucket.
The input USB voltage of this product is 5V. It is forbidden to use multi-port
mobile phone fast charging adapter, which may cause damage to the circuit
board. Please check the output voltage of your power supply and adapter type
carefully.
Boot Up & Self-Check
The DC head is the power switch. When the DC head is inserted into the DC
Socket, the product will start with a beep. Immediately afterward, the product
will conduct a self-check. After the self-check is complete, the fountain will
begin in normal mode by default.
Unplug the DC head to shut down and the product stops working.
How to Clean
Disassemble Parts for Full Cleaning
- Removing The Bracket and The Pump
- Installing The Bracket and The Pump
Precautions
Note: More things you need to pay attention to.
- Clean the filter element.It is recommended to rinse the filter element every time you re-fill water, which can effectively extend the service life of the filter element.
- Muffler sponge and pump filter sponge can be cleaned with detergent and rubbed.
- The top cover and the pump has an IP68 waterproof rating, and all components can be immersed for cleaning.
- All areas where the water flows can be cleaned with a small bristle brush.
- Do not use a dishwasher or high-temperature water during cleaning.
- If children use this equipment, please make sure to use the equipment under the guidance of adults.
Terms of Use & Limitation of Liability
-
Terms of Use
Your use of this product means that you accept all terms, conditions and statements in this manual. -
Correct Use
This product is designed for pets’ daily drinking water.
Proper use includes reviewing the entire user manual included with the product and any specific “Caution” statements. -
Prohibition of illegal or Prohibited Use
This product is only suitable for pets. Please ensure that the water source is clean, non-toxic and harmless. Using this product not in accordance with the instruction manual may violate local laws. -
Scope of Responsibility
The manufacturer is not responsible for any related damages, direct, indirect, punitive, non-major, and other indirect losses caused by incorrect use or abuse of this product. The buyer bears all risks and responsibilities of using this product. -
Modification of Terms and Conditions
The manufacturer reserves the right to change the terms, conditions and notices related to this product.
Certification Statements
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The company declares under its own responsibility that this product complies
with the basic requirements of CE (2014/30/EU) and RoHS
(2011/65/EU). Without the approval of our company or the distributor,
unauthorized changes or modifications to the equipment may violate the CE
regulations, may cause the user to lose the right to operate the equipment,
and invalidate the warranty.
Recycling Information
Please observe the regulations for electronic and electrical devices to be
disposed of in the respective country. In some countries or regions,this
device must be recycled. If this device is no longer required, it must not be
disposed of with normal municipal waste. For more recycling information,
please refer to local regulations.
Cleaning And Maintenance
Simple Cleaning
- It is recommended to clean the bucket, filter element, and muffler sponge every time you re-fill water.
- The bucket and muffler sponge can be cleaned with dish soap, the filter element is only cleaned with water.
- Simple cleaning does not require the disassembly of the product.
Full Cleaning
- Please perform a full cleaning once a month.
- After long-term use, some dirt may be built up on the surface of the internal waterway, which needs to be cleaned with a brush.
- Full cleaning requires disassembly of the product.
Note: The water pump is connected to the top cover by a power cord, which cannot be disassembled.
Maintenance of The Pump
Why Need to Maintain The Pump? After long-term use, the water flow may decrease accumulation of dirt and foreign objects inside the water pump, so it is necessary to disassemble the pump regularly for cleaning. It is recommended to disassemble and wash twice a year.
How to Disassemble The Pump?
- As shown in the picture below, use a screwdriver to remove the screw to open the cover, and then take out the propeller directly.
- Use a small brush to clean the propeller and all internal surfaces of the pump. Finally assembled.
FAQ
-
Q: Why doesn’t the product work after connecting the wires?
A: The DC head is not inserted all the way, please insert it again. The power cable is broken inside, please replace with a new one. Please check if the socket switch is turned on. -
Q: How long can the filter element be used?
A: The service life of the filter element may be longer or shorter depending on the specific usage. It is recommended to replace it after one month of continuous use. -
Q: Is the product quality safe?
A: All our products use food-grade ABS plastic, which is safe and non-toxic. The other parts are all BPA-free.The electronic parts are completely separated from electricity and water. -
Q: Why is there black powder floating in the water?
A: This is a fine powder of coconut shell activated carbon, which is safe and harmless. You can clean the filter element separately to solve this problem. -
Q: Why does the pump make abnormal noise during use?
A: It is possible that small foreign objects have entered the water pump. Please disassemble and wash the water pump and reinstall the pump.
Certification Statements
Fcc Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
Material execution standards
The main materials of the product (including 1, 2, 4, 7, 9, 11, 12, see page
5) have passed the test based on the terms of “FAD 21 CFR 180.22 &
181.32-Acrylonitrile monomer” and meet the food contact level standards. The
main materials of other parts are all BPA-free materials.
Specifications
- Product name: Pet Water Fountain
- Model number: F-016
- Input voltage: 5VDC
- Rated power: 1W
- Working current: 200mA
- Body material: Food Grade ABS
- Product capacity: 2.5L (84.5 fl oz U.S.)
- Net weight: 0.85kg (1.87lb)
- Product size: 21cm21cm15cm(8.3in8.3in6in)
- Operating temperature: 1 C~40 C (33.8 F~104 F)
- Storage temperature : -10 C~50 C (14 F~122 F)/No water
- Scope of application: cats and medium/small dogs
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>