smart and green BL-VINYL LED Light Instruction Manual
- June 5, 2024
- smart and green
Table of Contents
Operating modes
Turning ON/OFF
-Briefly press this button to turn on the light. – Hold the button down for 1 second to turn off the light.
OFF mode
Deactivating the remote control
– turn off your lamp and hold the button down for 5 seconds. The lamp will
briefly flash. ‘OFF’ mode is activated.
Reactivating the remote control
– briefly press the button to reactivate the remote control and turn on the
lamp.
Selecting a color mode (ambiance)
– A brief press lights the lamp in white mode and repeatedly presses to cycle
through the colors.
**Rainbow mode**
– A brief press sets the chosen color. A second press restarts the automatic
color rotation, .„
Rainbow mode, to return to a white light turn your lamp off and then on again.
| X1 – X7| X8| X9| X10
---|---|---|---|---
MODE| White / Red / Green / Blue
Yellow / Purple / Cyan| Rainbow mode| Stop in the chosen color| Continue to
change colour
MODE| Blanc| Mode Arc-en-Ciel| |
MODUS
FARBE| WeiB / Rot / GrOn / Blau
Gelb / Lila / Cyan| | |
Technical information
- 7 LEDs (1 white, 6 RVB)
- LED power consumption: 0.4W
- Lithium-ion battery: 3,7V 850mAh
- 8 hours of autonomy (depending upon use)
- Battery life in OFF mode: several months
- USB charging station: 5V charger not included
- Bulb power supply: 5.35Vdc-1A
- Charging time: 7h
- Radio range: 5m (direct range)
- Vinyl – Shock resistant
- Water-resistant
- Recommended operating temp: 0-40°C – Product guarantee: 2 years
*If you do not intend to use your lamp for over a month, but the lamp in ‘OFF’ mode. Recharge your lamp regularly to avoid damage to the battery and extend the life of this product.
Compliance
In the European Union (in accordance with Directive DEEE 2002/96/EC), and also
in other regions, you must return this product to a recycling collection point
at the end of its life. As this product is not ordinary household waste,
managing its end of life helps us protect our environment and limit the use of
our natural resources. For further information, please contact Goodnight Light
S.L. IPW Europe declares that this product complies with the following
European directives: R&TTE (1999/5/EC), LVD 2006/95/EC), RoHS (2011/65/EU),
EMC (2004/108/EC) and Battery (2006/66/EC). The corresponding Declaration of
Conformity may be viewed upon request.This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation. GOODNIGHT LIGHT®
INSTRUCTIONS: Please read before use
Charging base and charging
The lamp must be charged before it is used for the first time and regularly
after that (to prevent damage to the battery).
– Plug in the charging base. – Place the lamp on the charging base. – The
indicator gently glows red during charging. When the indicator turns green the
battery is fully charged. Allow seven hours to fully charge an empty battery.
Precautions
Carefully read and save these instructions before using the product. Use it according to the instructions given in this user manual. Failure to do so will void your guarantee. Lamp
- Do not expose to fire or other sources of intense heat.
- Charge your lamp regularly: the battery deteriorates after a few months without charging.
- Do not charge your lamp using a charging base other than the one provided.
- Extended exposure to sunlight can cause discoloration.
Proper use of Lithium Battery Charger
- Keep the charger as close as possible to the electrical outlet.
- Unplug the charger when not in use.
- Keep metal away from the charging terminal.
- Unplug the charger immediately if smoke appears or you smell a peculiar odor.
- Do not use outdoors.
- Do not use the charger if it is wet.
- Do not use chargers near cell phones.
- Do not touch the charging base during or after charging.
- Do not touch the charger, main socket or charging port with wet hands.
- Do not use near a heat source. Keep away from fire.
- Do not try to disassemble /reassemble the charging base.
- Keep the charging terminal clean. Unplug before cleaning.
- A completely discharged battery takes longer to charge.
- When not in use, battery capacity diminishes. Full capacity will be restored after three to five charging cycles.
- Keep out of reach of children and pets.
- Store in a dry place.
For any questions relating to the proper functioning of this product, please contact your point of sale. The manufacturer assumes no responsibility for damage caused by not following above instructions. Our vinyl lamps are produced by hand which results in each lamp being physically and visually unique in the way it appears when lit.
The remote control
BATTERY COMPARTMENT OPEN / CLOSE
When the lamp no longer responds to the signal from the remote control, replace the original battery with a new 3V CR2025 lithium battery.
copyright c 2021 Goodnight Light S.L.
Documents / Resources
|
smart and green BL-VINYL LED
Light
[pdf] Instruction Manual
BL-VINYL LED Light, BL-VINYL, LED Light
---|---