IKEA 9001774318 Integrated Dishwasher User Guide

IKEA 9001774318 Integrated Dishwasher

Product Information

Product Description:

Appliance

Features:

Adjusting top basket with side levers: To wash large items of tableware in the baskets, adjust the shelf position of the top basket. (Fig. 3 – 4)
Reorganising cutlery drawer: You can fold down the side shelves and front prongs to make more space for longer/wider items of cutlery. (Fig. 5 – 6)
Folding down prongs: If you do not need the folding tines, fold them down. (Fig. 7)

Product Usage Instructions

Before First Use:

Performing the initial configuration:

1. Add special salt.
2. Add rinse aid.
3. Switch on the appliance.
4. Setting the water softening system.
5. Set the amount of rinse aid to be dispensed.
6. Add detergent.
7. Start the Programme with the highest cleaning temperature without tableware.

We recommend you clean the appliance without tableware before using it for the first time to remove any marks from water or other residues.

Tip: You can change these settings and other Basic settings at any time.

Adding Special Salt:
If the special salt refill indicator lights up, add special salt to the dispenser for special salt just before the program starts.

Product information

Product Description

Appliance
You can find an overview of the parts of your appliance here.

Fig. 2

Features

You can find an overview of the possible features of your appliance and how to use them here.
These features depend on the model of your appliance.

Adjusting top basket with side levers
To wash large items of tableware in the baskets, adjust the shelf position of the top basket.
Fig. 3 – 4

Reorganising cutlery drawer
You can fold down the side shelves and front prongs to make more space for longer/wider items of cutlery.
Fig. 5 – 6

Folding down prongs
If you do not need the folding tines, fold them down.
Fig. 7

Before first use

Performing the initial configuration

On initial start-up or after a reset to the factory settings, you will need to make settings.
Requirement: The appliance has been installed and connected.

1. Add special salt.
2. Add rinse aid.
3. Switch on the appliance.
4. Setting the water softening system.
5. Set the amount of rinse aid to be dispensed.
6. Add detergent.
7. Start the Programme with the highest cleaning temperature without tableware.
   We recommend you clean the appliance without tableware before using it for the first time to remove any marks from water or other residues.

Tip: You can change these settings and other Basic settings at any time.

Adding special salt
If the special salt refill indicator lights up, add special salt tothe dispenser for special salt just before the programmestarts.

ATTENTION!

• Detergent may damage the water softening system.
• Only fill the dispenser of the water softening systemwith special dishwasher salt.
• Special salt can damage the tub due to corrosion.
• To make sure that any special salt that escapes iswashed out of the tub, add the special salt to the dis-penser for special salt immediately before the pro-gramme starts.

Fig. 8 – 13

Adding rinse aid
If the rinse aid refill indicator lights up, top up with rinse aid.Only use rinse aid for domestic dishwashers.
Fig. 14 – 17

Setting water softening system
Set the water hardness on your appliance.
Fig. 18

Overview of water hardness settings
You can find an overview of the water hardness values that can be selected here.

Regeneration of the water softening system – overview
In order to ensure fault-free operation of the water softening system, the water softening system is regenerated in all programs before the end of the main rinse cycle.
Here, you can find an overview of the maximum additional running time and consumption values during the regeneration of the water softening system. You can find the column applicable to your product variant according to its water consumption in the Eco 50° programme.

The consumption values specified are laboratory measurements determined in accordance with the currently applicable standard using the Eco 50° program and with the factory value of the water hardness set to 16 – 20°E .

Setting the amount of rinse aid
If there are streaks or water marks on tableware, change the amount of rinse aid.

Note: A low level adds less rinse aid during the wash cycle, a higher setting adds more rinse aid during the wash cycle.
Fig. 19

Detergent
Only use detergents that are suitable for dishwashers. Both separate and combined detergents are suitable.
For optimum washing and drying results, use separate detergent, adding special salt and rinse aid separately.

Note: Follow the manufacturer’s instructions for each detergent.
If you are using tablets, one is enough. Insert the tablets in a horizontal position.
If you are using powder or liquid detergent, follow the man-ufacturer’s instructions and quantities for dosage in the detergent dispenser. 20 ml – 25 ml detergent is sufficient for normal soiling. Iftableware is only lightly soiled, slightly less than the amount of detergent specified is usually sufficient.

Control panel

You can use the control panel to configure all functions ofyour appliance and to obtain information about the operat-ing status.
Fig. 20

Overview of programmes

You can find an overview of the programmes that can be set here.

Start a programme:
Fig. 21

Set the start time for a programme:
Fig. 22

Information for test institutes
Test institutes are provided with information for comparability tests, e.g. according to EN60436.
These are the conditions for conducting the tests, however they are not the results or consumption values.

E-mail enquiries to: [email protected]
The product number (E-Nr.) and the production number (FD) are required here. They can be found on the rating plate on the appliance door

Additional functions

Additional functions You can find an overview of the additional functions that can be set here.

Handling problems
If you have a problem with your appliance, refer to the “Troubleshooting” section in the full version of the user manual, which is available on the following pages: www.ikea.com.

Technical specifications

You can find more information about your model online at https://eprel.ec.europa.eu/.

This web address is linked to the official EU EPREL product database. Please then follow the instructions on searching for the models. The model identifier is made up of the model name and article number without dots. This information can be found on the label on the right side of the appliance door.
Note: To save energy and water, load the machine with the maximum number of place settings specified.

Information regarding free and open source software
This product includes software components that are licensed by the copyright holders as free or open source software.
This licence information can be downloaded via our home page www.ikea.com. Alternatively, you can request relevant information from [email protected].
The source code will be made available to you on request.
Please send your request to the above address. Subject: “FOSS”

© Inter IKEA Systems B.V. 2023 23320 AA-2361279-1

References

• ANCES - ANCES Asociación Nacional de CEEIs
• Appliances.com
• ces.com
• Hej! Welcome to IKEA Global
• Hej! Welcome to IKEA Global

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>