BLITZ WILL BW-NL1 Blitzwill Neon Rope Light User Manual

: June 9, 2024
: BLITZ WILL

Table of Contents

BLITZ WILL BW-NL1 Blitzwill Neon Rope Light
Product parameters
Operation instructions for the remote controller
Operation instructions for WiFi connection
Adding device mode
Frequently asked questions
FCC STATEMENT
CONTACT
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLITZ WILL BW-NL1 Blitzwill Neon Rope Light

Product parameters

Model: Bw-NL1
Name: Neon light band 3M
Power: 36W /24V 1.5A
Voltage: AC100-240V-50/60Hz
Color: RGBIC
Size: 3M
Control mode: APP/button control/infrared remote control
Compatible device: Amazon Alexa & Google Assistant
Product’s gross weight: 700gg
Inner box size: 200X200X51 mm
Components: light band X1, controller X1, remote controller X1, power adaptor X1, operation instructions X1, fastener X10

Operation instructions for the remote controller

Rhythm 1-2: Single click to switch to 1-2 rhythm modes
Rhythm 3-4: Single click to cycle through 3-4 rhythm modes

Lock the remote control: After pressing the button, the remote control is locked; if you want to unlock it, you need to press the open button, other buttons are invalid.

Operation instructions for WiFi connection

Download and install the applications

Use your phone to scan the QR code below or search for “Smart Life” in the APP STORE to download and install the applications. BLITZ-WILL-BW-NL--Blitzwill-
Neon-Rope-Light-FIG-3

Registration: please follow the instructions below to register your account before using it for the first time. If you have an account, please enter your password to log in directly.
Login: Enter the correct account and password to login.

Bluetooth WiFi dual mode auto addition device mode

Confirm that the mobile phone has Bluetooth and WiFi functions. From the main application page, it will automatically pop up whether to add a device. Click on Yes to enter the dialog box and select the 2.4G WiFi network as required for network distribution.

Details are as shown below:

Adding device mode

Adding device -AP mode

From the main application page, click on ‘+ in the upper right corner to enter the next window page, and then select light, as shown in the following figure.
In the common mode, click on “AP mode” in the upper right corner to enter the AP mode window page.
In the AP mode, please confirm that the red light of the device flashes slowly, and then go to the next step.

Note: If the indicator flashes fast, just press the controller again for 5-10 seconds, and the red light will flash slowly.

If the light does not flash slowly or quickly, first press and hold the ‘mode’ key of the controller for 5-10 seconds to keep the red ight flashing quickly, then release the button and press the controller for 5-10 seconds, and the red light will flash slowly.

BLITZ-WILL-BW-NL--Blitzwill-Neon-Rope-Light-FIG-6

Control device

After the device is successfully connected, the relevant smart device will be displayed on the homepage. Click to enter its control page

Note

It supports fast operation when the device is online.
When the device is offline, it displays ‘offline’ and cannot be controlled.

LED with light and music synchronization functions

Go to the music mode, play music with any device, and the LED indicator will be synchronized with music.

Note

The volume of the mobile phone is relatively small. Bluetooth audio is preferred.

Click on ‘Edit’ in the upper right corner to enter the user-defined scene.
Breathing and static music mode (suitable for light music).
The flash music mode is applicable to fast-paced music.
You can add/delete/modify the displayed colors and change the speed of color switching.
If you are not satisfied, you can reset the settings.

Connecting Amazon Alexa

Connecting Google Assistant

Frequently asked questions

How do you reset the controller?
- Hold the ‘Mode” button of the controller for 5-10 seconds
How can you get more help?

How can the dual mode light band be controlled by Bluetooth?

WiFi connection devices will be preferred. When a WiFi router is disconnected and the network fails, wait for 3-5 minutes, and the Bluetooth connection will be automatically switched and can be controlled through Bluetooth; That’s to say when WiFi is disconnected, the device can be controlled as long as the Bluetooth of the mobile phone is turned on matters needing attention.

Please use this unit in a dry environment.
Please use the input voltage of 4.5-25V DC voltage, and do not directly connect 220V AC.
An ordinary anode connection is required for this unit. The wrong connection will cause a failure.
In the process of product and software upgrading, the data and software interfaces listed in the text are only for description and reference and are subject to change without notice.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference.
this device must accept any interference received, including interference that may cause undesired operation

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Warning: changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body