V-TAC VT-3529-60 LED Strip Lights Instruction Manual

V-TAC VT-3529-60 LED Strip Lights Instruction Manual

This marking indicates that this product should not be disposed of with other household wastes.

Caution, risk of electric shock.

SAFETY INSTRUCTION AND WARNINGS!

1. Please make sure to turn off the power before starting the installation.
2. Please cut the LED Strip Light according to the cutting as shown in the cutting instructions. Cutting outside the marking will damage the product. Please cut only on the dotted/scissor marking on the LED Strip Light.
3. LED Strip Light cannot be folded or twisted during the installation. DO NOT turn on power until LED Strip Light is connected properly and well-installed.
4. DO NOT touch/cut the LED Strip Light when power is on.
5. DO NOT power the LED Strip Light in roll/package.
6. DO NOT install in water or flammable environment, and make sure well ventilated.
7. DO NOT wrap or cover LED Strip Light with any objects.
8. Once the IP65 LED Strip Light is cut, it loses its IP rating. To ensure and regain the IP rating kindly use the silicone glue.
9. Please use only approved accessories and engage professional electrician for installation work.
10. Do not turn on the power supply until the lighting strip has been properly installed.
11. Please do not use the product if any damage is found on the striplight.
12. Not to be used for a long period of time is an environment with temperature exceeding 40°C.
13. Do not wipe the strip with organic solvent to avoid damage to the insulation layer.
14. Install only by certified Electrician.

INSTALLATION

• Use only power supply DC: 12/24V
• In case when section is longer that 10M , we recommended to power strips from both ends
• When selecting appopriate power supply, please take into account , the electric power consumed by LED strips (kindly check the technical data sheet)

During Installation

• Red wire should be connected to the positive(+) side of the power supply unit.
• Black wire should be connected to the negative(-) side of the power supply unit.

Connecting LED Strip with power supply

Connecting RGB LED Strip with power supply and LED Controller

Remarks

• 1P20 can be used only indoors

CUTTING INSTRUCTIONS

CUTTING INSTRUCTIONS
NOTE: Cutting outside the marking will damage the product. Please cut only on the dotted/scissor marking on the LED Strip light.
IMPORTANT: When cutting IP6S Striplight, it will loose its IP protection. Please ensure to use Silicone Glue on the end of the striplight to ensure the IP Protection is retained.

PARALLEL CONNECTION

POWERING STRIPLIGHT FROM BOTH THE ENDS [SERIES CONNECTION]

NOTE: In case when section is longer that 10M , we recommended to power strips from both ends

Specifications

Model| White| LEO
Type
SMD 2835| LED
Quantity/M
60| Voltage
(V)
12V DC| Watt/M
4.2W| Current/M| IP Rating IP20/1P65| Beam
Angle
120′
---|---|---|---|---|---|---|---|---
VT-3525.60| 0.35A
VT-3528-60| Warm White| SMC 2835| 60| 12V DC| 4.2W| 0.35A| IP20/1P65| 120′
VT-3528-60| 4000<| SMD 2835| 60| 12V DC| 4.2V:| 0.35A| IP20PP65| 120′
VT•3528-60| Red| SMD 2835| 60| 12v DC| 4.2W| 0 35A| IP20/iP65| 120′
VT-3525•50| GiRen| SMD 2835| 60| 12V DC| 4.2W| 0 354| 1P20/tP65| 120′
VT-3528.60| Blue| WC 2835| 60| 12V DC| 4.2W| 0 354| 1P20/1P65| 120′
VT-3528-120| White| SMD 2835| 120| 12V DC| & W| 0 674| 1P20/1P65| 120′
VT-3528-120| V…,(rra White| SMD 2835| 120| 12V DC| 8W| 0 674| IP20PP65| 120′
VT-3528-120| 4000c| SMO 2835| 120| 12V DC| 8W| 0 674| IP20PP65| 120′
VT•35:8.120| Blue| SMO 2835| 120| 12V 0C| SW| 0 674| IP20/1P65| 120′
VT-352E-120| Red| SMD 2835| 120| 12V DC| 8W| 0.67A| 1820/1P65| 120′
VT-6050-30| White| SMO 5050| 30| 1211 DC| 4W| 0 33A| IP20PP65| 120′
VT-5050-30| Warm White| SMD 5050| 30| 12V DC| 4W| 0.33A| 1P20/1P65| 120′
VT-5050.30| 4000K| SMD 5050| 30| 12V DC| 4W| 0.334| 1P20PP65| 120′
VT-5050-30| Red| SMD 5050| 30| 12v DC| 4W| 0 334| 1P20pP65| 120′
VT-5050-30| Green| SMD 5050| 30| 12V DC| 4W| 0.334| IP20PP65| 120′
VT-5050.30| Blue| SMD 5050| 30| 12V DC| 4W| 0 33A| 1P20,00365| 120′
VT-5050-30| RGB| SMO 5050| 30| 12V DC| 4W| 0 33A| IP20/1P65| 120′
VT-5050,60| White| SMD 5050| 60| 12V DC| 11W| 0.92A| IP2OPP65| 120′
VT-5050.60| Warm White| SMD 5050| 60| 12V DC| 11W| 0.92A| IP20/1P65| 120′
VT-5050-60| 4000(| SMD 5050| 60| 12V DC| 11W| 0.92A| IP20PP65| 120′
VT-5050.60| Red| SMD 5050| 60| 12V DC| 11W| 0.92A| 1P20/1P65| 120′
VT-5050-60| Gr.r…n| SMD 5050| 60| 12V DC| 11W| 0.92A| IP2OPP6S| 120′
VT-5050.60| Blue| SMD 5050| 60| 12V DC| 11W| 0.924| IP2OPP65| 120′
VT-5050-60| RGB| SMD 5050| 60| 12V DC| 7W| 0.59A| IP20/1P65| 120′
VT-5050.60| RG9 -W| SMD 5050| 60| 12■.. DC| 8W| 0 674| IP20/1P65| 120′
Vf-5050.60| RG9*-SA”N| SW) 5050| 60| 12V DC| 8W| 0 674| IP20/’P65| 120′
VT-5050-60| RGB•4000K| SMD 5050| 60| 12V DC| 8W| 0.67A| IP20/1P65| 120′
VT-505040| Yellow| SMD 5050| 60| 12V DC| 11W| 0•92A| IP20/IP65| 120′
VT-2835-204| White| SMD 2835| 204| 12‘• DC| 17W| 1.42A| IP20| 120′
VT-2835.204| Warm White| SMD 2335| 204| 12V DC| 17W| 1.42A| 1P20| 120′
VT-2835-204| 6000K| SMD 2335| 204| 12V DC| 17W| 1 424| IP20| 120′

.

VT-5050-60.24| White| SMD 5050| 60| 24V DC| lOW| 0 42A| 1P20| 120′
VT-5050.60-24| Warm White| SMD 5050| 60| 24V DC| lOW| 0.42A| IP20| 120′
VT-5050.60-24| 40►0c| SMD SOSO| 60| 24? DC| IOW| 0.424| IP20| 120′
VT         835-60-5| White| SMD 2335| 60| 12V DC| 4.2W| 0 354| IP20,1IP65| 120′
VT-2835.60-S| Warm White| SMD 2335| 60| 12V DC| 4.2W| 0 354| IP20pP65| 120′
VT-2835-60-S| 4000K| SMD 2335| 60| 12V DC| 4.2W| 0 354| IP2OfiP65| 120′
VT-2835-240| White| SMD 2835| 240| 12V DC| 20W| 1 574| IP20| 120
VT-2835 240| Warm White| SMD 2335| 240| 12V DC| 20W| 1 67A| 1P20| 120′
VT-2835 240| 4000K| SMO 2835| 240| 12V DC| 20w| 1.67A| IP20| 120′
VT-2835.126| White| SMC 2535| 126| 24V DC| 8W| 0.334| IP20| 120″
VT-2835.126| Warm White| SMD 2835| 126| 24v DC| 8W| 0.33A| 1P20| 120′
VT-2835126| 4000K| SMO 2835| 126| 24V OC| 8W| 0 33A| IP20| 120′
VT-2835.168| White| SMD 2835| 168| 24V DC| 12W| 0.5A| IP20| 120′
VT•2835 168| Warm White|  SMD 2835| 168| 24V DC|  12W| 0.5A| IP20| 120′
VT-2835-168| 4000K| SMD 2835|  168| 24V DC| 12W| 0.5A| 1P20| 120′
VT-2835 238| White| SMD 2835| 238| 24V DC| 18W| 0.75A| IP20| 120′
VT-2835.238| Warm White| SMD 2835|  238| 24V DC| 18W| 0.75A| 1P20| 120′
VT-2835 238| 4000K| SMD 2835| 238| 24V DC| 18W| 0.75A| 1P20| 120′
VT-2110-700| 4000K| SMD 2110| 700| 24V DC| 21W| 0 8754| 1P20| 120′
VT-2110-700| White| SMD 2110|  700| 24V DC| 21W| 0.875A| IP20| 120′
VT-2110-700| Warm White| SMD 2110| 700| 24V DC| 21W| 0.875A| IP20| 120′
VT-2216.364| White| SMD 2216| 364| 24V DC| 30W| 1.25A| IP20| 120′
VT-2216-364| Warm White| SMD 2216| 364| 24V DC| 30W| USA| IP20| 120′
VT-2216.364| 4000K| SMD 2216| 364| 24V DC| 30W| 1.25A| 1P20| 120′
VT- COB -S12| 4000K| I| 512| 24V DC| 12W| 0.5A| IP20| 120′
VT- COB -512| White| /| 512| 24V DC| 12W| 0.5A| IP20| 120′
VT- COB -512| Warm White| /| 512| 24V DC| 12W| 0.5A| IP20| 120′
VT- COB -280| Warm White| /| 280| 24V DC| 10W| 0.42A| IP20| 120′
VT- COB -280| 4000K| /| 280| 24V DC| 10W| 0.42A| IP20| 120′
VT- CO8 -280| White| /| 280| 24V DC| lOW| 0.42A| 1P20| 120′
VT- COB -421| Warm White| /| 421| 24V DC| 10W| 0.42A| 1P20| 120′
VT- COB -421| 4000K| /| 421| 24V DC| 10W| 0.42A| IP20| 120′
VT- COB -421| White| /| 421| 24V DC| lOW| 0.42A| 1P20| 120′
VT’ 2835-90| 4000K| SMO 2835| 90| 24V DC| 4W| 0.17A| 1P20| 120′
VT- 2835-90| 6400K| SMo an| 90| 24v DC| 4 W| 0.17A| 1P20| 120′
VT- 2835-90| 3000K| SMO 2835| 90| 24v DC| 4 W| 017A| _ (P20| 120′

REMARKS

1. 1P20 can be used only indoors.
2. 1P65 can be used only indoors as well as outdoors (Not for signage use).

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>