V-TAC VT-30ST LED Street Light Instruction Manual
- June 5, 2024
- V TAC
Table of Contents
WEEE Number:80133970
INSTALLATION INSTRUCTION
LED STREET LIGHT
TECHNICAL DATA:
| MODEL | VT-30ST | VT-50ST | VT-100ST | VT-150ST |
|---|---|---|---|---|
| WATTS | 30W | 50W | 100W | 150W |
| CCT | 4000K/6400K | 4000K/6400K | 4000K/6400K | 4000K/6400K |
| LUMENS | 3600LM | 6000LM | 12000LM | 18000LM |
| CRI(Ra) | >80 | >80 | >80 | >80 |
| VOLTAGE | AC175-265V | AC175-265V | AC175-265V | AC175-265V |
| FREQUENCY | 50Hz | 50Hz | 50Hz | 50Hz |
| BEAM ANGLE | 110° | 110° | 110° | 110° |
| DF | 0.9 | 0.9 | 0.9 | 0.9 |
| LIFE LONG | 30000 H | 30000 H | 30000 H | 30000 H |
| SURGE PROTECTION GRADE | 4KV/6KV | 4KV/6KV | 4KV/6KV | 4KV/6KV |
| MOUNTING DIAMETER | 950/960MM | w50/960MM | p50460MM | cp50/960MM |
INTRODUCTION & WARRANTY
Thank you for selecting and buying the V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installation and keep this manual handy for future reference. If you have any other queries, please contact our dealer or local vendor from whom you have purchased the product. They are trained and ready to serve you at their best. The warranty is valid for 5 years from the date of purchase. The warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours of Daily operation. Usage of the product for 24 hours a day would void the warranty. This product is warranted for manufacturing defects only.
WARNING!
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
- If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similarly qualified person in order to avoid a hazard.
- Replace any cracked protective shield.
- The minimum distance from lighted objects is 1m.
- Proper grounding should be ensured throughout the installation.
- Please read through all the following instructions before installing the unit.
- The user should prepare all the necessary accessories and spare parts (Spare parts not provided) including the junction box.
- The raised lighting must be connected to the earth’s ground.
- Installation must be performed by a qualified electrician. Strictly follow these instructions for installing, and avoid the intensity of the power cable during installation.
This marking indicates that this product should not be disposed of with other
household wastes.
Caution, risk of electric shock.
**‘This product contains a light source of energy efficiency class
INSTALLATION & WIRING DIAGRAM
INSTALLATION INSTRUCTION
-
Switch OFF the power before starting the installation
-
Connect supply wires to the luminaire as displayed in the wiring diagram.
-
(a) Pass the cable through the mounting adaptor, and fix 4 screws on the street light with a 13mm Allen wrench.
(b) Fasten 4 screws against the pole by a 13mm Allen wrench. -
Turn ON the power to Test
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCT RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B