Marketing Olfativo Sl MO106-APP Device Instruction Manual
- June 5, 2024
- Marketing Olfativo Sl
Table of Contents
Marketing Olfativo Sl MO106-APP Device
Instructions
Where to get the app:
Please search “scent marketing” in Google play or App store and you will find
it.
Note
- Please make sure that the Bluetooth function is turned on;
- Please make sure that the location function of the mobile phone is turned on.
Amend password
Concentration and Consumption
Notes:
- 480ml oils can diffuse 31000-33000 times under normal circumstances.
- All of the above grade atomization work time is 5 seconds.
- Different grade and oil may with different consumption.
Specification
- Product Aroma diffuser
- Size 217190.578mm
- Volume 480ml
- Weight 813g
- Coverage 150m3
- Power Battery (4*1.5V) USB 5V
Installation
- Insert the key and the mating part, twirl to ” OPEN ” and then pull them out. Press the fixed button on the top and push forward.
- Tightly connect the atomizer head and the fragrance bottle, and install them to the machine.
- Choose “Power mode” or “Battery mode”, plug in or insert the battery.(Please wait about 12 minutes to let machine charged on the first time connect with power.)
- Insert the key to the mating parts, then insert them to the keyhole, twirl to”CLOSE” for locking.
Warning
-
Please keep the machine vertical. Tilt or lie flatly may cause oil overflow. The machine efficiency may be affected.
Shall not modify, disassemble or repair the machine. If any failure happens to the machine, please contact ourtechnical personnel. -
Do NOT use a quick charger for the device.
-
When the machine is first used or hasn’t been used for more than 7 days, the controlling board is out of power. Please insert the batteries/plug in and wait for 1-2 minutes, the machine will be back on automatically.
Equipment cleaning
- The machine needs to be cleaned when below situations happen:
- You’re about to change to another kind of essential oil.
- The atomization volume becomes weak.
Cleaning steps:
- Pull out the atomized head, loose the bottle
- Refill industrial alcohol into bottle about 15%, make it diffuse 5-10 times.
- Airing the atomized head and the bottle.
Troubleshooting
| Breakdown | Solution |
|---|
Does not diffuse
| -Check whether the mode you choose is correct or not.
-Check if the machine is during “Non-Working period”
-Air pump may be damaged, change a new one.
-Check whether the tube is loose or not
Low diffuse
| -The atomizing core is blocked, clean by alcohol or change a new component.
-Check whether the gasket is damange/loose or not.
-Check whether the tube is loose or not
Oil spill| -Check whether the bottle is loose or not
-The gasket in the atomized head is damaged or loose.
Oil sprinkle| -The atomized head is damaged, change a new one
-The machine is tilled or lie down, keep the machine vertical.
Abnormal noise| -The air pump is loose, retighten the pump
-The air pump is damaged, change a new one.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>