FICHA TECNICA 12V3A Power Supply Instruction Manual
- June 5, 2024
- FICHA TECNICA
Table of Contents
FICHA TECNICA 12V3A Power Supply Instruction Manual
Introduction
This power supply uses high quality electronic components and has been manufactured with advanced manufacturing technology. High product quality and reliability are guaranteed.
Scope of Operation
Suitable for building inter-coms, entrance and exit inhibitors, and various electric door locks
Functions and Features
- Input AC 110V/50Hz, output DC 12V stabilized 3A/5A
- Direet control of door locks to reduce loading on door inhibitors, anti disturbance, reduced wiring to save costs and reduce possible faults
- N/O and N/C contacts for connection to various electric locks
- Delayed switching, settable between 0-15 seconds
- Automatic protection. Power will be temporarily disconnected or fuse will blow when there is overloading or a short-circuit
- Remote control with an optional remote control module. A remote controller is used to activate doors / gates. Control range is up to 80m a open field with no disturbance
External Dimensions
205mm x l65mm x 74 mm
188mm x 85mm x 60mm
Wiring terminals
- 1-3 N/O contacts. Normally no output, 12V DC when activated. 1 is positive terminal, 3 is negative terminal
- 2-3 N/C contacts. Normally 12V DC ,no output when activated. 2 is positive terminal, 3 is negative terminal
- 4-5 Stabilized DC output 12V. 4 is positive terminal, 5 is negative terminal
- 5-6 Terminals for Door Open push switch.
- 7 Low frequency signal output, connected to signal wire of door inhibitor
- 8-9 High frequency signal output, positive terminal of lock 8-9 Building intercoms
Read User Manual Online (PDF format)
Loading......