QZSD M 01 Tripod and Selfie Stick User Manual

June 14, 2024
QZSD

QZSD M 01 Tripod and Selfie Stick

QZSD M 01 Tripod and Selfie Stick

Thank you for choosing QZSD tripod. The smart design allows you convert it to different products: Mini tripod, 64″ height tripod, long selfie stick, and trekking pole. It provides you practical use in different scenarios and activities.

  • Video calls
  • Taking selfies –
  • Taking family photos in garden
  • Filming daily life
  • Vlogging
  • Taking team photos
  • Camping or trekking
  • Filming growing diary

Please read and follow the instruction, enjoy it in photographing.

Set up the Tripod base

QZSD M 01 Tripod and Selfie Stick 1

  1. Loosen the center column
  2. Open 3 legs in base bottom
  3. Move the legs down then lock it tight with the screw

Note: Please do not put your hand inside the handle when move the leg down and up to avoid pinching

Extend the tripod height

You can extend the tripod height by connect the selfie stick and center column.

  1. Remove the pan head in center column.
  2. Screw the selfie stick into the center column Pull out the clip-lock to the desired height.

QZSD M 01 Tripod and Selfie Stick 2

Set up the trekking pole

The selfie stick can be used as trekking pole for mountaineering with different height.

  1. Remove phone holder
  2. Screw in the rubber pad to protect the stick’s foot.
  3. Pull out the flip lock to a comfortable height.

QZSD M 01 Tripod and Selfie Stick 3

How to use the Bluetooth Remote

Remote Shutter R10

QZSD M 01 Tripod and Selfie Stick 4

Power on and Pairing

  1. Press and hold the Remote Shutter button and Red LED will flash
  2. Turn on your mobile phone Bluetooth, select Remote Shutter to pair it.
  3. If pairing is successful, Remote Shutter is showing as connected device mobile phone Bluetooth.

Taking photo

  1. Connect to Remote Shutter with your mobile phone.
  2. Turn on mobile phone camera in photo mode.
  3. Press the Remote shutter button to take a photo.

Taking video

  1. Connect to Remote Shutter with your mobile phone
  2. Turn on mobile phone camera in video mode.
  3. Press the Remote shutter button to start video recording, press button again to stop recording.

Turn off Remote
Press and hold Remote button until Rel LED flash and then off.

Battery

It powered by a CR2032 button battery; it will turn off automatically in 10 minutes to save power in idle mode.
Battery life is around 1 year depended on using frequency. Need to change a new CR2032 battery if remote cannot be turned on.

Model name: R10
Battery: CR2032
Rating: 3.0V T

his device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Precautions

  • The camera should be securely fastened to the quick-release plate before mounting on to the tripod
  • Don’t install the camera to tripod until all tripod legs and column are locked and stabilized.
  • Don’t exceed the maximum load capacity.
  • Don’t set up, pull down, move the tripod or adjust leg while a camera is mounted.
  • Store the tripod in the bag if you don’t use it in normal time.

One-year warranty service

We offer you One-year warranty service and this item can be returned in its original condition for a full refund or replacement within 30 days of receipt. Contact us freely if any issues occur, go to Amazon’s order page and send us a message, we will offer a proper solution for you at the first time,

Kindly don’t forget to review our product, your honest review really helps us

  1. Sign into “Amazon.com
  2. Click “Orders”
  3. Click “Write a product review”

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals