CHOETECH T200-F MagLeap Magnetic Wireless Car Charger User Manual

CHOETECH T200-F MagLeap Magnetic Wireless Car Charger

Package Contents

• 1x Magnetic Wireless Car Charger, 1 x Air Vent Mount; 1 x User Manual
• 1 x Customer Service Card

Specifications

• Input: 5-12V 2A (Max)
• Output: 15W (Max)

How to Use

1. Connect Ball head mount with wireless charger:
   First, twist counterclockwise to remove the adjustment screw from the rear of the wireless charger. Then, place the adjustment screw on the ball head and push ball head into receiving a screw. Finally, twist the adjustment screw clockwise to secure. Connection.

2. Attach to Vehide Air Vent:
   Twist the wingnut cOunterclockwise to open the air vent clamp. Then, insert damp into the vehicle air vent leaf and twist clockwise to secure. Finally, loosen or tighten the adjustment screw to adjust the wireless charger angle according to your preference.

3. Charge or Remove Your Phone:
   Our automatic magnetic alignment allows you to easily attach and remove your phone.

Instructions

• Please make sure your smartphone is Qi-enabled or has a Qi-Compatible cover.
• To achieve fast wireless charging, a Quick Charge 3.0 power adapter is required.

Attentions

• For your safety, please do not disassemble the Choetech MagLeap Charger.
• To avoid damaging the internal circuitry, please do not use or store the magnetic wireless charger in a hot or humid environment.
• A magnet may interfere with the magnetic charging of the product or cause the product to function incorrectly. To avoid potential product interference, please keep magnetic chip cards (e.g. ID cards, credit cards) or medical devices (e.g. pulse measurement device, hearing aid) at least 20cm away from the product.

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

To maintain compliance with FCC’s RF exposure guidelines, This equipment should be installed and operated with a minimum distance between 20cm the radiator your body: Use only the supplied antenna.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>