soundcore Life Dot 3i True Wireless Earbuds User Guide
- June 5, 2024
- Soundcore
Table of Contents
soundcore Life Dot 3i True Wireless Earbuds User Guide
APP
Download the Sound core App to customize the user interface (e.g. adjust
volume, control playback, activate Siri), adjust EQ, switch ANC modes, update
firmware, and explore more.
Google Play And the Google play logo are trademarks of google inc.
Apple and the apple logo are trademark of apple inc.
FIRMWARE UPGRADE
Ensure the earbuds are placed in the charging case and the case remains open
until the firmware upgrade is completed.
AMBIENT SOUND
Switch ANC/Transparency/Normal modes in the Soundcore App.
- ANC (Active Noise Cancellation): Reduce unwanted background noise.
- Transparency: Stay aware of your surroundings while listening to music.
WEARING
Choose the EarTips that fit yours best
CHARGING
Fully dry off the USB charging port before charging. Use a certified USB-C
charging cable to prevent any damage.
POWERING ON/OFF
Open the charging case, the earbuds will automatically power on. To power off,
place the earbuds in the charging case and close it.
PAIRING
Open the charging case, the earbuds will automatically enter the Bluetooth
pairing mode.
Select “Sound core Life Dot 3i” on your device’s Bluetooth list to connect.
CONTROLS
x1 : Press once
x2: Press twice
2s: Press and hold for 2 seconds
x1: Press once
x2: Press twice
2s : Press and hold for 2 seconds
RE-PAIRING
Pairing with another device: Place the earbuds in the charging case and leave
the case open. To enter pairing mode, press and hold the button on the case
for 3 seconds until the LED indicator on the charging case flashes white
slowly.
RESET
Reset if the earbuds cannot properly pair with each other or with other devices. Place the earbuds in the charging case and leave the case open. Press and hold the button on the case for 10 seconds until the LED indicator on the charging case flashes red 3 times . This confirms that the reset was successful and your earbuds can be connected normally.
LED LIGHT GUIDE
Steady white
Steady red
Flashing white
Flashing red
TIPS
Bluetooth Pairing:
For some smartphones, you may be requested to re-confirm the pairing on a pop-
up window after you have selected “Soundcore Life Dot 3i” to pair.
Breaking Bluetooth Connection:
Turn off your Bluetooth device and turn it on again. Remove “Soundcore Life
Dot 3i” from your device’s Bluetooth list. Reset:
If you try to reset the earbuds, make sure that the earbuds are being charged
in the case and leave the case open.
SUPPORT
For FAQs, detailed user manual and more information, please visit Choose the
EarTips that fit your ears best.
www.soundcore.com/support
Customer Service
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>