niceboy T00051809 Ion SmartPlug Smart Socket User Manual

: June 5, 2024
: niceboy

Table of Contents

APP CONNECTION
SPECIFICATIONS
FAQ
USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

niceboy T00051809 Ion SmartPlug Smart Socket User Manual

APP CONNECTION

Download Niceboy ION app from Apple Store or Google Play Store.
Log in/Register your account.
In top right corner click on „+“ icon, then go to „Electrical“ and choose „SmartPlug“.
Choose your WIFI and enter password.
Press the power button on the device approximately for 5s until the device resets and starts blinking fast.
The device should be found within 30s.
Add the device.

SPECIFICATIONS

Input voltage: AC 110V-240V
Output: 16A maximum load
Wireless type: 2,4 GHz WIFI
App support: iOS / Android

FAQ

What should I do when I cannot turn the SmartPlug on or off?
- Make sure your mobile devices and the SmartPlug are connected to the same WIFI network.
- Make sure the devices connected to the SmartPlug are turned on.
What should I do when device configuration process has failed?
- Check whether the SmartPlug is powered on or not.
- Check whether your mobile phone is connected to 2,4 GHz WIFI network.
- Check your network connectivity. Make sure the router is working properly:
- If the router is dual-band router, please select 2,4 GHz network and then add the SmartPlug
- Enable the router’s Broadcasting function.
- Configure the encryption method as WPA2-PSK and authorization type as AES or set both to AUTO.
- Wireless mode cannot be 11n only.
- Check for the WIFI interference or relocate the SmartPlug to another location within the signal range.
- Check whether the router’s connected devices reach the amount limit. Please try to turn off some device’s WIFI function and configure SmartPlug again.
- Check if router’s wireless MAC filtering functions is enabled. Remove the device from filter list and make sure the router is not prohibiting SmartPlug from connection.
- Make sure the password of your WIFI network entered in app is correct when adding SmartPlug
- Make sure the SmartPlug is in ready for app-configuration: the indicator light is quick blinking (twice per second).
- Repeat the app-configuration process.
- Factory reset the SmartPlug and try to add it again.
Can I control device through 3G/ 4G/5G cellular networks?
- Yes, but the SmartPlug and the mobile device are required to be under same WIFI network when adding the Smartplug for the first time After successful device configuration, you can remotely control the device through 3G/4G/5G cellular network.

USER INFORMATION FOR DISPOSING ELECTRICAL AND ELECTRONIC DEVICES (HOME

USE)

This symbol located on a product or in the product’s original documentation means that the used electrical or electronic products may not be disposed together with the communal waste. In order to dispose of these products correctly, take them to a designated collection site, where they will be accepted for free. By disposing of a product in this way, you are helping to protect precious natural resources and helping to prevent any potential negative impacts on the environment and human health, which could be the result of incorrect waste disposal. You may receive more detailed information from your local authority or nearest collection site. According to national regulations, fines may also be given out to anyone who disposes of this type of waste incorrectly. User information for disposing electrical and electronic devices.

(Business and corporate use)
In order to correctly dispose of electrical and electronic devices for business and corporate use, refer to the product’s manufacturer or importer. They will provide you with information regarding all disposal methods and, according to the date stated on the electrical or electronic device on the market, they will tell you who is responsible for financing the disposal of this electrical or electronic device. Information regarding disposal processes in other countries outside the EU. The symbol displayed above is only valid for countries within the European Union. For the correct disposal of electrical and electronic devices, request the relevant information from your local authorities or the device seller.

Importer to EU: RTB media s.r.o., Pretlucka 16,
Prague 10, 100 00, Czech Republic, ID: 294 16 876
Made in China.