Snooze Band DELUX Bluetooth Sleep Mask User Manual

Snooze Band DELUX Bluetooth Sleep Mask

Bluetooth sleep mask with built-in relaxing music and automatic switch-off timing function.

Control Buttons

Turning On/Off

• Press and hold for 3 seconds

Pairing with your device

1. Turn on Bluetooth
2. Turn on the SnoozeBand
3. Connect to Snoozeband Deluxe on your device

• After being paired successfully, the blue light will flash for 10 seconds.
• When switched on next time, it will automatically search for and attempt to connect with the last paired device. If you want to pair it with a new device, make sure it’s disconnected from the previously paired device.
• NOTE: To save power, it will switch off automatically if there’s no Bluetooth connection for 3 minutes.

Charging

Make sure the device is switched off, open the zipper on the eye mask and you will see the USBC charging port.

1. Connect the Type C USB cable to the charging port and the other end to a power source with ∼5V (eg. phone charger)
2. The LED light will turn red while charging. It will turn blue as soon as the battery is fully charged (approx. 2 hours). Please do not overcharge as this might damage the battery over time.

LED Indicators

Status

|

Indicator

---|---
Bluetooth pairing mode| Flashing red/blue lights
Bluetooth connected| Blue light flashes for 10sec

White noise mode

| Blue light flashes twice for 10sec

60minTimer

| Solid red light for 10sec
120min Timer| Solid blue light for 10sec
180min Timer| Solid green light for 10sec
Timer cleared| Double flash green light

How to fasten the band

The Velcro is hidden away inside the fabric. To access it, please flip the pocket at the end of the Snooze band inside out fully. The adjustable Velcro strap now allows you to secure the band to the most comfortable position. For storage/transport, please flip the Velcro inside again to protect it and roll the band up.

How to set a timer

You can set the timer to 60, 120, or 180 minutes.

1. Double press the + button to set the timer to 60 min, double press again for 120 min, and again for 180 min. 60 min, 120 min, 180 min, clear timer setting .. it repeats this cycle.
2. The corresponding light and a voice prompt will remind you of the timer set.

NOTE:
In Bluetooth mode, if there’s no device connected, the timer will not work. In white noise mode, the timer will always work.

How to use white noise

SnoozeBand Deluxe comes with built-in white noise, so you can enjoy relaxing audio even without a Bluetooth connection.

1. Double press the – button to enter the White noise mode
2. Short press the middle button to play/pause music Long press the + and – buttons to switch between tracks Short press the + and – buttons to adjust volume

NOTE:
You can switch between the bluetooth and White noise mode at any time by double pressing the – button. In White noise mode, the bluetooth will be disconnected.

Washing the SnoozeBand

1. Carefully remove the components of the eyemask before washing
2. Hand or machine wash with cold water and air-dry

Precautions

• DO NOT expose the product to liquids or moisture
• DO NOT attempt to tamper with the product by dropping, disassembling, opening scratching, etc.
• DO NOT store the product near acidic or alkaline material
• Take out the headphones before washing
• Keep the product away from fire and high temperatures
• Keep the product away from children and animals
• Note: when not used for 3-6 months, charge once.

Features

• Built-in wireless speakers and microphone
• Integrated white noise
• Automatic shut-off timing function
• Rechargeable through USB cable

Specifications

• Wireless version: VS.2
• Frequency: 2.402 GHz – 2.480 GHz
• Transmission range: 20m/66Ft
• Rated power: RMS 10mW x 2
• Speaker unit: 32/30mm
• Battery: 300mAh rechargeable Li-polymer battery
• Playtime: 10-13 hours
• Charge time: 2 hours – please do not overcharge.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>