ExBrite CJJSB3648DKSXFLX LED Lighted Mirror User Manual
- June 5, 2024
- ExBrite
Table of Contents
Installation and Operating Manual
CJJSB3648DKSXFLX
CJJSB6036DKSXFLX
CJJSB7236DKSXFLX
CJJSB4836DKSXFLX
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you
carefully read through this instruction sheet, and refer back to them during
installation to ensure your product is fitted safely and correctly. Keep these
instructions for future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer, and all other parts for damage. If any part is damaged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CAUTION The light source of this product is non-changeable light diodes
(LED). Do not disassemble the product, as the light diodes can cause damage to
the eyes.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution, and care, are factors
that can’t be built into any product. These factors must be supplied by the
person(s) caring for and operating the fixture. Do not install this fixture in
hazardous locations.
CHECK THE PRODUCT LIST AFTER OPENING THE PACKAGE
- LED Lighted Mirror –1 pcs
- Screws for wall –4 pcs
- Plastic Anchor –4 pcs
- Mounting bar –2 pcs
- Installation Manual –1 pcs
TOOLS YOU MAY NEED
INSTALLATION MANUAL
| Level and mark the location.
---|---
| Place the mounting bar against the wall and make some marks on the wall.
| Drill the holes and place the suitable plastic anchors.
| Screw the mounting bar onto the wall with the screws.
| Connect the mirror with the main supply.
• We provide plug with mirrors.
• Optional to cut the plug directly,then connect to electrical wiring if using
wall switch.
ATTENTION: PLEASE CUT OFF THE MAIN POWER SUPPLY BEFORE WIRING!
| Hang the mirror onto the mounting bar.
OPERATION INSTRUCTION
-
The button turns blue when connected to the main supply.
ON/OFF and CCT adjustment -
The button is always on as long as connecting to the main supply.
-
Short-touch the button to turn on/off the mirror.
-
Adjusting color temperatures (CCT) between warm white and cool white by long-touching the button for seconds.
-
Finish setting by withdrawing your finger when the color reaches the one you need.
-
Optional to be wired to wall switch by ON/OFF memory function.
ON/OFF and Dimmer
- Short-touch the button to turn on/off the mirror.
- Long touching the button to adjust the brightness (Dimming).
Anti-Fog Function
- The mirror begins to be warm and defog after pressing the defogger button. Press again to quit the anti-fog function.
- Note: The defogger will stop automatically after 60 minutes of continuous operation to prevent any damage caused by prolonged high temperatures.
AFTERCARE INSTRUCTIONS
Clean using a soft dry cloth only when turned off. Never use cleaning agents
or abrasive materials. Do not allow moisture to come into contact with the
lamp.
THANK YOU FOR YOUR SUPPORT.
We wish you have a wonderful experience in our product. If you have any other
needs or queries, please feel free to contact us by email
info@exbriteusa.com, and get replies within 48
business hours.
Website: https://www.allsumhome.com/
Email; infoPexbriteusa.com
Hotline: +1 302 336 8180