ExBrite USA DHMC3030V3TX LED Lighted Medicine Cabinet User Manual
- June 3, 2024
- ExBrite USA
Table of Contents
USA DHMC3030V3TX LED Lighted Medicine Cabinet
User Manual
DHMC3030V3TX LED Lighted Medicine Cabinet
Series 1: LED Cabinet without Clock
DHMC3030V3TX W30” x H30”
DHMC3026V3TX W30” x H26”
Series 2: LED Cabinet with Clock
Series 3: LED Cabinet with external storage shelf and Night
light
For easy
and safe installation, please refer to the following:
Read all instructions thoroughly before installing the enclosed product. Read
and take note of all safety, care and maintenance information.
PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE DURING PRODUCT
OPERATION AND MAINTENANCE.
INSTALLATION INSTRUCTIONS
WARNING AND SAFETY INSTRUCTIONS
Before installing your LED Medicine Cabinet fixture,please make sure that you
carefully read through this instruction sheet, refer back to them during
installation to ensure your product is fitted safely and correctly. Keep these
instructions for future use.
WARNING Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage, if any part is damaged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for any possible damage during transportation or missing parts. Handle the product with care and protect against nocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE: The important safeguards and instructions that appear in this
manual are not meant to cover all possible conditions and situations that may
occur. It must be understood that common sense, caution and care are factors
that can’t be built into any product. These factors must be supplied by the
person(s) caring for and operating the fixture. Do not install this fixture in
hazardous locations.
REQUIRTOOLSED
PARTS
SUPPLIED
Cabinet installation Instructions
for Hanging Walls
Cabinet installation Instructions for Hanging Walls
The side panels and
cabinets are individually packaged , you need follow the STEP 5 to STEP 7 to
install the side panels for hanging walls version,for embedded installation no
need install the side boards.
Cabinet installation
Instructions for Hanging Walls
Lift the
cabinet onto the mounting bar. Ensure the hooks engage the bar.
Place the support angle on the bottom of the cabinet. Mark hole
location on wall. Drill hole. Insert anchor where needed. Fixed the support
angle by screw. 
Cabinet installation Instructions
for Hanging Walls
Insert the glass shelves between the layer board clips.
Cabinet embedded Installation Instructions
- All diagrams are for reference only.All model dimensions and proportion sposition will vary.
Instructions for assembling the doors and cabinet-Suit for the items which doors and cabinet are separately packaging (considering the huge weight, we suggest installing the cabinet first, then assemble the door with cabinnet as below steps)
- Insert the hings to the base ,then connect the doors with the cabinet
- Adjust corresponding screws on the hinge to align the doors, ensure that gaps are even and the doors open and close smoothly
- Insert the wire on the door into the terminal on the cabinet and tighten the screw
Manual to turn on/off
light,dimming,CCT changing with touch switch
| • Short ‐touch the button to turn on/off the mirror.
• Adjusting color temperatures (CCT) between warm white and cool white by long
‐touching the button for seconds.
• Finish setting by withdrawing your finger when the color reaches the one you
need.
• Optional to be wired to wall switch by ON/OFF memory function.
---|---
| • Short‐touch the button to turn on/off the mirror.
• Long touching the button to adjust the brightness (Dimming).
• Finish setting by withdrawing your finger when the brightness reaches the
one you need.
| • Mirror begins to be warm and defog after pressing the defogger button.
• Press again to quit the anti ‐fog function.
• Note: The defogger will stop automatically after 60 minutes of continuous
operation to prevent any damage caused by prolonged high temperature.
Manual to setting clock with touch switch
Choose and set the clock and temperature mode
- Turn off the light.
- Long-touch button 2 to choose and set the mode when it flash.
There are two clock and temperature modes to choose.
A: 12C/12F: Fahrenheit (F) and 12 hours
B: 24C/24F: Celsius (C) and 24 hours The default mode is 12C/12F.
Setting the clock
- Turn off the light to set the clock.
- Long touch button 1 for seconds,the Hour will flash, then short-touch button1 and 2 to set Hour.
- Wait for seconds after setting up the Hour,then it will automatically switch to the Minute flash.
- Short-touch button 1and 2 to set up the Minute.
- Wait seconds after you finish the time setting,the time will be saved automatically.
Turn on/off the touch switches’ blue background ligth
- In default mode the touch switches is with blue background light , long-touch button 3 to turn on/off the blue background light.
Remarks:
- The clock shows for 5s, and shift to the temperature showing for 2s, then go back to show the clock.
- It automatically displays the indoor temperature by auto sensing through the temperature sensor.
- DO NOT cover the temperature sensor.
Night Light
Inside Night Light
- The Night Light inside the cabinet will be auto-on/off according to the brightness surrounding when the door be opened.
- Don’t cover the night light sensor.
External Night Light
- The Night Light will be auto-on/off according to the brightnes surrounding when the rocker switch is kepping turned on.
- If need turn off the night light at night,please turn off the rocker switch manually.
- Don’t cover the night light sensor.
Website : http://www.exbriteusa.com
Email : info@exbriteusa.com
Hotline: +13023368180
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>