ExBrite USA AB-C-4024R-U-001 LED Mirror Instruction Manual
- June 4, 2024
- ExBrite USA
Table of Contents
ExBrite USA AB-C-4024R-U-001 LED Mirror
Product Features：
Extra thick LED light Touch switch with memory Touch switch dim function Anti- fog pad
LED Mirror
- Series： REJSBM2432VCSKXXX AB-C-4024R-U-001
- Size： W600XH800MM W1000XH600MM
- Series： AB-C-C24-U-001
- Size： DIA600MM
For easy and safe installation, please refer to the following: Read all instructions thoroughly before installing the enclosed product. Read and take note of all safety, care and maintenance information.
PLEASE KEEP THIS INSTRUCTION MANUAL FOR FUTURE REFERENCE DURING PRODUCT OPERATION AND MAINTENANCE.
WARNING AND SAFETY INSTRUCTIONS
Before assembling your LED Lighted Mirror fixture, please make sure that you carefully read through this instruction sheet, refer back to them during installation to ensure your product is fitted safely and correctly. Keep these instructions for future use.
WARNING
Risk of Fire and Electric Shock
- All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician.
- Switch off the electrical supply at the main circuit board BEFORE installation and maintenance.
- Suitable for indoor use only. This product should be positioned well away from curtains and fabrics. Never cover the mirror.
- Regularly check the cord, the transformer and all other parts for damage, if any part is damaged the product should not be used.
INSTALLATION SAFETY
- Inspect the product immediately upon receipt for the transit damage or missing parts. Handle the product with care and protect against knocks to all sides and edges of the glass.
- Ensure there are no hidden pipes or cables in the wall before drilling.
- Wear suitable eye protection when drilling. Take care if drilling on tiled surfaces in case the drill slips.
CAUTION
The light source of this product is non-changeable light diodes (LED). Do not
disassemble the product, as the light diodes can cause damage to the eyes.
NOTE:
The important safeguards and instructions that appear in this manual are not
meant to cover all possible conditions and situations that may occur. It must
be understood that common sense, caution and care are factors that can’t be
built into any product. These factors must be supplied by the person(s) caring
for and operating the fixture. Do not install this fixture in hazardous
locations.
PRODUCT DESCRIPTION
CHECK THE PRODUCT LIST AFTER OPENING THE PACKAGE
- LED Lighted Mirror 1pcs
- Installation Manual 1pcs
- Z-bar 1pcs
- REJSBM2432VCSKXXX-Wall Mounting Screws 4pcs（One as a spare part）
- REJSBM2432VCSKXXX-Drywall Anchor 4pcs（One as a spare part）
- AB-C-4024R-U-001-Wall Mounting Screws 4pcs（One as a spare part）
- AB-C-4024R-U-001-Drywall Anchor 4pcs（One as a spare part）
- Series： REJSBM2432VCSKXXX B-C-4024R-U-001
- Size： W600XH800MM W1000XH600MM
- All diagrams are for reference only. All model dimensions and proportions position will vary.
PRODUCT DESCRIPTION & INFORMATION
Model：REJSBM2432VCSKXXX 
**INSTALLATION PROCESS
**
Warning:
Always switch off the electrical supply at the mains during installation and
maintenance. Do not switch on the electrical supply at the mains until the end
of the installation.
Step 1:
Use an I-Beam level to mount the included mounting bracket with 3 screws (Use
anchor when it’s installed on drywall, concrete or tile surface).
Step 2:
Make sure the circuit breaker for the power source of the mirror is off. Then
connect the neutral (White), hot (black) and ground (copper wire or Green)
wire between the mirror and the junction box.
Step 3:
Hang the mirror with desired placement by mirror Z-bar on to the mounting
bracket.
PRODUCT DESCRIPTION
CHECK THE PRODUCT LIST AFTER OPENING THE PACKAGE
- LED Lighted Mirror 1pcs
- Installation Manual 1pcs
- Z-bar 1pcs
- AB-C-C24-U-001-Wall Mounting Screws 4pcs（One as a spare part）
- AB-C-C24-U-001-Drywall Anchor 4pcs（One as a spare part）
Model： AB-C-C24-U-001
All diagrams are for reference only. All model dimensions and proportions
positions will vary.
Warning:
Always switch off the electrical supply at the mains during installation
and maintenance. Do not switch on the electrical supply at the mains until the
end of the installation.
Step 1:
Use an I-Beam level to mount the included mounting bracket with 3 screws (Use
anchor when it’s installed on drywall, concrete or tile surface). ‘
Step 2:
Make sure the circuit breaker for the power source of the mirror is off. Then
connect the neutral (White), hot (black) and ground (copper wire or Green)
wire between the mirror and the junction box.
Step 3:
Hang the mirror with desired placement by mirror Z-bar on to the mounting
bracket.
OPERATION PROCESS
- Series： AB-C-4024R-U-001 AB-C-C24-U-001
- Connect the power supply and touch the switch once to turn on the light.
- When the light is on, the anti-fog function is activated Automatically.
- Adjust the brightness of the light by long press the same switch.
OPERATION PROCESS
Button 1:
First short press, the anti-fog function works. Second short press, the anti-
fog function stops . The two operations loop in turn .
Button 2:
Short press (< 1 second) the LED light switch button to turn on / off the LED
lamp. Long press (> 1 second) the button to adjust the brightness. When the
LED is on, long press the button to activate dimming. The LED brightness
changes in loop from 100% to 5%, or from 5% to 100% on the second press.
LED Mirror Power Source FAQ
Scenario 1 (Wall Switch)
By doing so, the mirror is now bridged to the wall switch. In order to turn
on the mirror, the wall switch needs to be on. The touch switch can be used to
turn on the LED mirror and anti-fog pad. The mirror shuts down once the wall
switch is flipped to OFF.
Scenario 2 (Wall Dimmer Switch – Not Accepted)
This is a scenario that is not acceptable. There is no workaround for our
mirror. Do not try this way as it will damage the LED driver.
THANK YOU FOR CHOOSING US.
We wish you have a wonderful experience in our product. If you have any
queries, please feel free to contact us by email:
[email protected]. For more ESDIY products, please
scan the following QR code.