BWC02 Braun Wireless Charger User Manual
- June 5, 2024
- Braun
Table of Contents
BWC02 Braun Wireless Charger User Manual
Getting started
- hoose a flat location with easy access to a working electric supply to power up your wireless charger.
- Peel away the frosted surface protector.
- Unravel the USB-C cable and plug it into your adapter.
- Plug the other end of the cable into your BRAUN Wireless Charging Pad.
Charger status
Your BRAUN Wireless Charging Pad has a green LED light at the front that gives you information about the status of the device.
- When connecting to the adaptor, the light will flash 3 times showing that it is ready to use.
- When a device is placed on the pad, a continuously glowing light indicates that it is charging. It will dim to a low level after 60 seconds.
- If the device to be charged is not placed correctly or if there are any foreign objects on the pad, the light will flash continuously and the device will not be charged properly.
How to safely and properly use your BRAUN Wireless Charging Pad
- If you’re using an accessory with your phone, for example, a phone case, card wallet…etc., please remove it before charging as it may affect the charging performance or even cause the charger to malfunction.
- For maximum charging efficiency, the device must be aligned with the centre of the charging area.
- For best charging performance, we recommend you use a 20W power delivery wall adapter.
- No metal case or foreign objects should be placed between the device and the charging pad.
- High temperature will reduce the charging speed and restrict power, which is a phenomenon common to all wireless chargers. It is recommended that you charge your device in environments with temperatures below 25o C / 77o F.
Product Description
Name: Braun Wireless Charger
Model Number: BWC02
Input: 5V/3A; 9V/2.2A; 12V/1.67A
Output: 5W / 7.5W / 10W / 15W
Operating frequency range: 110-205KHz (For UK), 115-205KHz (For US)
Manufacture: Zeon Ltd.
Manufacture address: Unit 1, Phoenix Park, Apsley Way, London,
England, NW2 7LN.
WARNINGS – Important Safety Instructions
Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess heat, fire or explosion.
X Do not place metal objects between phone and charger as the charger may
get very hot.
X Do not use or store devices in high-temperature environments, including
heat caused by intense sunlight or other forms of heat, as this may reduce
charge efficiency or reduce lifespan of the product.
X Do not place product in fire or other excessively hot environments.
Exposure to fire or extremely high temperature may cause explosion.
X Do not expose the wireless charger to water. Exposure to water may
result in short circuiting. If short circuiting occurs immediately turn off at
the wall.
X Do not disassemble this product, any modification or disassemble may
result in a void of warranty.
X Use of a power supply or charger not recommended may result in a risk
of fire or injury to persons.
X If this device is accessible to or may be used by a minor, the
purchasing adult agrees to be solely responsible for providing supervision,
instruction, and warnings. Purchaser agrees to defend, indemnify, and hold
Manufacturer harmless for any claims or damages arising from unintended use or
misuse by a minor.
X All products have gone through a thorough quality assurance inspection.
If you find that your device is excessively hot, is emitting odour, is
deformed, abraded, cut, or is experiencing or demonstrating an abnormal
phenomenon, immediately stop all product use.
Note:
This product is meant for use only in conjunction with the QI compatible
device. Manufacturer is not responsible for any damages to any device incurred
through the use of this product. Manufacturer shall not in any way be liable
to you or to any third party for any damages you or any third party may suffer
as a result of use, intended or unintended, or misuse of this product in
conjunction with any device or accessory other than the appropriate device for
which this product is designed. We will not be responsible for any damages you
or any third party may suffer as a result of misuse of this product as
outlined above.
Guarantee
2 year guarantee against material and workmanship defects. The guarantee is valid in those countries where the unit is officially being sold Physical damage is not covered under the Guarantee.
Braun helpline
Should you have a problem with your product, please check your local service
centre at: www.braun-clocks.com
www.braun-watches.com
or contact +44 208 208 1833
WARNING! This product is covered by the Waste Electrical and Electronic Equipment (WEEE) directive. It should not be discarded with normal household waste but taken to your local collection centre for recycling.
FCC Information
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
This device complies with Part 15 of the FCC rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
WARNING! Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
UKCA Warning
This device was tested for operations. To comply with RF exposure
requirements, a minimum separation distance of 20cm must be maintained between
the user’s body and the wireless charger, including the antenna. Third-party
belt-clips, holsters, and similar accessories used by this device should not
contain any metallic components. Body-worn accessories that do not meet these
requirements may not comply with RF exposure requirements and should be
avoided. Use only the supplied or an approved antenna. The device complies
with RF specifications when the device used at 20cm form your body.
UKCA The declaration of conformity is as follows
This device in compliance with the essential requirements and other relevant
provisions of UK Radio Equipment Regulations (SI 2017/1206); UK Electrical
Equipment (Safety) Regulations (SI 2016/1101); and UK Electromagnetic
Compatibility Regulations (SI 2016/1091). All essential radio test suites have
been carried out.
EU Declaration of Conformity
Hereby, Zeon Far East Ltd Declares that the product BWC02 is in compliance
with the following Directives: Radio Equipment Regulations 2017, Electrical
Equipment (Safety) Regulations 2016 and The Restriction of the Use of Certain
Hazardous Substances in Electrical and Electrical Equipment 2012. The Full
test of the UK declaration of conformity is available at the following
internet address: www.braun-clocks.com.
Radiated H-Field: -2.26 dBuA/m@10m
Certain trademarks used under license from the Procter & Gamble Company or its affiliates.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>