V-tac VT-51 50W LED WORK FLOODLIGHT User Manual
- June 5, 2024
- V TAC
Table of Contents
V-tac VT-51 50W LED WORK FLOODLIGHT
TECHNICAL DATA
Model| Watts| Lumens| Beam Angle| PF| CRI| On/Off Cycle| Wire Length| Input Power|
Dimension
---|---|---|---|---|---|---|---|---|---
VT-51| 50W| 4000| 100’D| 0.9| >80| >15000| 3 Meters with BS Plug| AC: 85-265V|
295x355x70mm
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the
best. Please read these instructions carefully before starting the
installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 5 years from the date of purchase. The warranty does
not apply to damage caused by incorrect installation or abnormal wear and
tear. The company gives no warranty against damage to any surface due to
incorrect removal and installation of the product. The products are suitable
for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would
void the warranty. This product is warranted for manufacturing defects only
WARNING
- Please make sure to turn off the power before starting the installation.
- The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
- Please read through all the instructions before installing the unit.
- In case of safety shield damage, replace it immediately with tempered glass.
- If the external cable or cord of this luminaire is damaged, it shall be replaced by the manufacturer or his service agent or similar qualified person in order to avoid hazard.
| Replace any cracked protective shield
---|---
| Minimum distance from lighted objects 1m
| This marking indicates that this product should not be disposed of with
other household wastes.
| Caution, risk of electric shock
INSTALLATION DIAGRAM
INSTALLATION INSTRUCTIONS
- Switch OFF the power before starting the installation.
- Place the floodlight to your preferred location.
- Connect the plug to a socket (make sure that the power is switched off before inserting the plug into the socket).
- Switch ON the power and test the light.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>