PYLE PBKSR40 Desktop Wireless BT Bookshelf Speakers User Guide
- June 3, 2024
- Pyle
Table of Contents
PYLE PBKSR40 Desktop Wireless BT Bookshelf Speakers
Please read all instructions before use for the best performance of this product. Save these instructions for future reference.
Box Contents
LED Indicators and Button Introduction
01. Power switch
02. Input selection
Press in to navigate between audio sources: BT -> Optical -> Coaxial -> LINE
IN
03. Sound effects
Press in to navigate between audio sources: Music -> Dialogue -> Movie
04. Volume control
05. Treble control
06. Coaxial input port
07. Bass control
08. Power port
09. Line in input port
10. Optical input port
11. Left speaker audio output
12. Left speaker audio in
Active Speaker
Passive Speaker
Know Your Remote
| | Power
button| **| Mute/Unmute
---|---|---|---|---
| Volume up| | Volume down
| Previous track| **| Next track
__| Play/pause| __| Bluetooth mode
__| Optical mode| __| Input mode
| Line mode| | Coaxial mode
| Movie mode| | Music mode
| Dialogue mode|
Connection Diagram
a. Digital Optical cable (supplied)
b. Coaxial cable (not supplied)
c. BT
d. Stereo RCA to 3.5mm audio cable (supplied)
e. RCA to RCA audio cable (supplied)
f. Power Adapter (supplied)
Connecting with a TV Active Speaker
Method 2. Connecting using a RCA to 3.5mm cable. Select RCA mode.
Method 1. Connecting using an Optical cable. Select Optical mode and set
the TV’s audio output to “PCM”. (More information on PCM page)
Method 3. Connecting using an Coaxial cable. Select Coaxial mode and set
the TV’s audio output to “PCM”. (More information on PCM page)
Setting “PCM” on your TV
When all cables are connected properly, and LED indicator lights properly, if there is no sound from tv or Soundbar, please set your tv as below:
- Press “Menu” on the TV’s remote control.
- Press the arrow keys on the remote to scroll to “Audio Settings.”
- Press “OK” on the remote control.
- Scroll to “Advanced Audio” and press “OK”. Some televisions may not have an”Advanced Audio” menu and may list various audio settings instead.
- Scroll to “Audio Output Mode” or “Digital Audio Output Mode” and press “OK”.
- Scroll until “PCM” is displayed as the current audio output.
- Press “OK” to save the settings.
a. Press the “BT” button on the remote or press the “ ” button on back
panel of the active speaker, the LED indicator blinks blue.
b. Turn on Wireless BT on the BT device.
c. Select “PyleUSA” and connect it. When your BT device is connected, the
LED indicator blinks blue slowly.
d. Play music files from the device, connected via BT, through the
bookshelf speaker.
Troubleshooting
No sound
- Check if the power indicator light is ON.
- Try to turn up the volume using either the master volume control or remote control.
- Ensure the audio cables are firmly connected and the input is set correctly on the speakers.
- Check if there is signal output from the audio source.
Cannot connect via Wireless BT
- Make sure the speaker is switched to BT input, in other audio input mode BT can not be paired or connected. Disconnect from any BT device by press and hold the volume dial in BT mode, then try again.
- Effective BT transmission range is 10 meters, make sure operation is within the range.
- Try another BT device for connection.
The PBKSR40 Bookshelf Speaker does not turn on
Check if mains power is connected or if the wall outlet is switched on.
Specifcations
| Power output: | L/R: 40W + 40W |
|---|---|
| Signal to noise ratio dB(A): | L/R: ≥80dB (A |
| Input sensitivity: | LINE IN: R/L: 600±50mV |
OPT: R/L: 500±50mFFS
Frequency response:| OPT: R/L: 500±50mFFS
Bass unit:| 40HZ-20KHZ
Tweeter unit:| 4 inch (102mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>