niceboy 999 Kc STREAM PRO 2 LED User Manual
- June 5, 2024
- niceboy
Table of Contents
STREAM PRO 2 LED
User Manual / Webcam
DESCRIPTION
- Camera Lens
- Integrated mount
- USB-C port
- Tripod screw-thread
- Microphone input
- Lighting touch-pad
- Front panel with LED lights
PC CONNECTION
To connect the webcam to a PC, use the supplied USB cable, which you connect to the USB-C port (3) on the camera and the other end to a USB on the PC. The Nice boy STREAM PRO 2 LED webcam is a Plug & Play device, therefore no installation on the PC is required and after being connected to the PC, the camera is ready for use.
LED LIGHTING
The front panel lighting (7) is controlled by tapping on the top of the camera
(6). The lighting is active when the camera is connected to a PC via cable and
also in the program that will be used for video streaming (ie. the camera is
actively used). Tap the touch-pad (6) to activate the panel lighting, tap
again to increase the light intensity (there are a total of 3 light
intensities available), and tap again (fourth time) to turn the light off.
Notice: if the camera is only connected to a PC, the LED lighting is not
active. It will not be activated until the camera is used in a streaming
program.
INSTALLATION
Open the camera mount and place the camera on top of the monitor with the lens facing forward.- Press the mount so it is fully pressed against the backside of the monitor.
Nice boy Tip: you can also place the camera on a workbench or mount it on a tripod using the tripod screw-thread (4) on the bottom of the mount.
PACKAGE CONTENTS
Nice boy STREAM PRO 2 LED Webcam Integrated to mount for table/monitor USB cable Manual
PARAMETERS
Maximum
video resolution:
Camera Lens:
Microphone:
Camera port:
System requirements:
Dimensions:
Weight:| Full HD (1920 x 1080p)
FOV 90°, aperture f/1,8
Yes
USB-C
Windows 8.1 and latter,
MacOS 10.1 and latter,
USB 2.0
127 x 50 x 54 mm
101 g
---|---
You can find this manual in electronic form at
www.niceboy.eu in the support section. This product
complies with all the basic requirements of relevant EU directives.
USER INFORMATION FOR DISPOSING OF ELECTRICAL AND ELECTRONIC DEVICES (HOME
USE)
This symbol located on a product or in the product’s original documentation
means that the used electrical or electronic products may not be disposed of
together with the communal waste. In order to dispose of these products
correctly, take them to a designated collection site, where they will be
accepted for free. By disposing of a product in this way, you are helping to
protect precious natural resources and helping to prevent any potential
negative impacts on the environment and human health, which could be the
result of incorrect waste disposal. You may receive more detailed information
from your local authority or nearest collection site. According to national
regulations, fines may also be given out to anyone who disposes of this type
of waste incorrectly. User information for disposing of electrical and
electronic devices.
(Business and corporate use)
In order to correctly dispose of electrical and electronic devices for
business and corporate use, refer to the product’s manufacturer or importer.
They will provide you with information regarding all disposal methods and,
according to the date stated on the electrical or electronic device on the
market, they will tell you who is responsible for financing the disposal of
this electrical or electronic device. Information regarding disposal processes
in other countries outside the EU. The symbol displayed above is only valid
for countries within the European Union. For the correct disposal of
electrical and electronic devices, request the relevant information from your
local authorities or the device seller.
Importer to EU: RTB media s.r.o., Pretlucka 16,
Prague 10, 100 00, Czech Republic, ID: 294 16 876
Made in China.
References
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!
- Niceboy - IT'S YOUR DAY!