Cotogni P3 True Wireless Earbuds User Manual
- June 5, 2024
- COTOGNI
Table of Contents
P3 True Wireless Earbuds
User Manual
PACKAGE CONTENTS
- l x Charging Case
- 10SB-C Coble
- 1 x User Manual
- A Pair of Earbuds
OVERVIEW
CHARGING
-
Charging earbuds
Put the earbuds back into the charging case and close the charging case, earbuds white indicator will flash. -
Charging case
Plug in the cable to the choring case port, the white indicator will flash
SWITCH CONTROL
Tum On
Take the earbuds out of the charging case Or press the touch panel on the
eorbud for 6s
TumOff
Return the earbuds to the charging case and close the lid Or touch and hold
the earbuds touch panel for 6s (when both earbuds are used, it cannot be
turned off when acting on one earbud)
Once connecting your device successfully the first time, earbuds reconnect your device automatically when you take them out of the charging case again
DEVICE CONNECTING
- Turn on the Bluetooth on your device
- Take earbuds out of the charging case
- Select “Cologni P3” from the list of available devices
Once connecting your device successfully the first time, earbuds reconnect your device automatically when you take them out of the charging case again
DEVICE CHANGING
- Touch and hold both earbuds for 1 Os, earbuds will disconnect from the previous device
- Select the ‘cologne P3’ from your new device Bluetooth list
MUSIC
|
---|---
VOLUME
CALLS
CONTROLS & LED INDICATORS
| Play /Pause | Double Tap L/R earbud |
|---|---|
| Prey Track | Touch and hold L earbud for 2s |
| Next Track | Touch and hold R earbud for 2s |
| Answer/Hang Up Calls | Double tap L/R earbud |
| Reject Calls | Touch and hold L/R for 2s |
| Volume – | Triple tap the L earbud |
| Volume + | Triple tap the R earbud |
Earbuds
| LED Status Indicator | Status |
|---|---|
| White flashing | Pairing |
| White always on | Charging |
| No indicator | Fully charged |
Charging Case
| LED Status Indicator | Status |
|---|---|
| White flashing | Charging |
| White always on | Fully charged |
SPECIFICATIONS
Earbuds
| Model | EA08A |
|---|---|
| Technology | A2DP, AVRCP, HFP, HSP, AAC,SBC |
| Speaker Sensitivity | 95d8±3dB@1KHz |
| Frequency Range | 20Hz — 20KHz |
| Impedance | 320 |
| Charging Time | lH |
| Battery Life | 5H 2 (max volume) |
| Battery Type | Li-polymer (30mAh x 2) |
| Operating Range | 10m/33f |
| Weight | 3.5ax2 |
Charging Case
| Charging Input | DC 5v |
|---|---|
| Charging Time | 1.5H |
| Battery Type | Li-polymer 300mAh |
| Number of Eorbuds Recharges | 3 times (pair) |
| Weight | 38g |
ATTENTION:
- You need to take the earbuds out of the charging case then they will power on. It will power off after it is backed into the charging case and closed the lid.
- Please take the earbuds out of the charging case before connecting ta the phone.
- Once it connected the device successfully the first time, earbuds will connect your device automatically after you take them out of the charging case next time.
- Before connecting the new device, you should tum off the previous connected device’s Bluetooth or forget the pairing data.
- When earbuds charging, please close the charging case lid.
- Keep away from corrosive liquid and fire sources.
- When the earbuds can’t be charged normally, please try to manually return the earbuds to the correct position in the charging case.
- Each earbud just controls itself separately. Each earbud can be used individually.
FCC WARNING STATEMENT:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Pont 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy. ff not installed and used in accordance with the
instructions may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.ff this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try ta correct the interference by one or more
of the following.
MEASURES:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirements.
The device has been evaluated to meet general RF exposure requirements.
The device has been evaluated to meet general RF exposure requirements.
contact us
support@cotogni.com
info@cotogni.com https://cotogni.eqstep.com/
active lifetime warranty
Documents / Resources
|
Cotogni P3 True Wireless
Earbuds
[pdf] User Manual
EA08A, 2AYH6-EA08A, 2AYH6EA08A, P3, True Wireless Earbuds, P3 True Wireless
Earbuds
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>