Shenzhen ML-M7 Intelligent doorbell User Manual

Shenzhen ML-M7 Intelligent doorbell

Function Description

Description: Explain

• infrared lamp
  When the light is dusky, the device will automatically turn the infrared lamp on

• Micro SD card slot
  Support TF card storage (up to 64 GB)

• RESET key
  Press the RESET button for 6 seconds to restart the device and restore the default.

Operational instructions

1. Installation of Batteries
   Slide down to remove the backplane install the battery cover the back of battery bin.

2. App Download
   Use the mobile phone to scan the right two-dimensional code, choose Android or IOS to download and install APP according to the mobile phone system, or search for “JJHOME” to download and install in the mobile application market.

3. Registration and Login
   Open APP, if there is no account, please click “Register” according to the interface prompt, and sign in after registering a new account, if there is an existing account, complete and click “Login”.

4. Add a device

5. Turn on The device connects to the power cord. Please press the reset key for a long time. The device prompts “Reset Successful”. Please check whether there is a hot spot “JJ****” in the Wi-Fi list.

6. Add DEnter the list of devices, click “Add key”, click “Smart doorbell”, and choose the way to add.

7. Add methods
   A.Sound wave: Get the WIFI connected to the mobile phone, enter the password, click the next step, the interface pop-up operation prompts “mobile phone speaker near the device’s wheat”, click OK, the mobile phone emits sound waves, the device receives the sound wave blue light flashing, until the mobile phone’s sound wave stops, the blue light stops flashing, waiting for the device to connect to the router;
   B.AP connection:
   Click “skip” – Select the device hot spot “JJ ****” and enter the initial password(12345678); Return to APP, proceed to the next step according to the prompt, enter the Wi-Fi password, click save, device connection router;

8. Watch videos
   Click “Play” on the “Device List” interface and enter the Play interface. OEnter Real-Time Video Page Share Cloud storage View events SetHistory playback date full-screen Historical playback
   video 1OHand-free/handset Oscreenshot 2Album Two-way Interview

9. View events
   Click to view the event to see someone push the doorbell, human body induction alarm push, alarm push, power push, and can also view the alarm video playback and other events.

10. History
    Drag the progress bar to watch and store videos and click on the calendar icon.
    You can choose the time to watch the video.

11. Cloud storage
    If you need a cloud storage service, please contact the operator.

12. Function setting
    Select the configuration in the upper right corner of the real-time video page, and then go to the [configuration] page to configure the functions of the device.

13. Enter device name:
    enter to modify the name of the equipment;

14. Device password: Enter and modify the device password. In LAN search, you can search the device and input the device password to add.

15. Wi-Fi settings: Enter the “Wi-Fi Settings” page, select a Wi-Fi, and enter

16. the password, you can change the device Wi-Fi;
    Video resolution: Enter settable high definition, standard definition, fluent resolution.

17. Recording mode:here are three alternative video modes- a.Full-time: refers to the continuous video recording of the camera or doorbell.
    b.Alarm: Camera or doorbell are recorded when mobile detection or human body sensing is detected.
    c.Disabled: means that the camera or doorbell is not videotaped

18. Infrared sensitivity:Usually used for unattended surveillance video and automatic alarm. The images captured by doorbell at different frame rates are computed and compared by CPU according to certain algorithms.When the picture changes, if someone passes by and the lens is moved, the calculated results will exceed the threshold and indicate that the system can automatically make corresponding processing.

19. Sleep mode : If the equipment is not working for 10 seconds, it will automatically enter the dormancy state, and the equipment will also enter the power saving mode to prohibit dormancy: the non-dormancy equipment has been working, and the equipment will always consume electricity. Hibernation mode status options are limited to battery status options, such as devices connected to external power or USB wire Connected devices are in “no hibernation” state devices are always in Working state.

20. Format SD card: After entering, click “Yes” to operate SD card

21. Device information: You can view the device model, firmware version, storage space, remaining space, and power (doorbell) in this list.

22. Time setting: Time synchronization between device and mobile phone can be set.

23. Time zone setting: Synchronization with Mobile Time Zone.

24. 10. Share Users can share the device with their family and friends.

25. Click on the icon below to select the contacts in the mobile phone address book. Fill in the notes and share them with him(She);

26. If you want to delete after successful sharing, find the corresponding contact note name and slide the note box to the left. The delete key will appear on the right side. Click to delete the shared account.

27. Note: Shared users need to register in the JJHOM platform before they can get this function. According to the first or second steps of this article, user registration can be completed.

28. Delete device
    After finding the corresponding device and sliding to the left, a “Delete Device” appears. Click on the Delete Device to delete the device.

29. Personal Center
    My order: Click on my order to view historical orders for cloud storage

30. Albums: Click on the “Photo Album” on the “Personal Center” page to view the device screenshots, edit and delete the screenshots, etc.

31. Settings: Message notifications can be set for mobile phones.

32. Modify Password: The password of the current user can be modified.

33. About:
    a.User license agreement
    b.User manual :/t’s a common problem in the use of APP

34. LAN Visit
    In the login interface, click “LAN access” to enter the “LAN access” interface, through the LAN search to find the same network device; you can complete the “manual add” in Figure 21, add devices.

device installation

1. First, tear off the back glue paper.

2. Stick the back glue on the floor.

3. Fix the backboard on the wall or door with a screw.

4. Install the doorbell on the floor.

5. Install the whole fixing screw at the bottom of the doorbell.
   Note: Installation of the floor should be positioned and perforated at least 1 cm away from the side wall.

6. There is no positive or negative pole if an AC power supply is needed through an adapter board connection.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>