Lenco SPR-200 Splashproof Bluetooth Speaker FM radio USB User Manual

June 5, 2024
Lenco

Lenco LOGO Model: SPR-200
USER MANUAL
Splashproof portable high-power boombox with radio, BT, USB, and SD
Lenco SPR 200 Splashproof Bluetooth Speaker FM radio
USB

CAUTION:
Usage of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

PRECAUTIONS BEFORE USE

KEEP THESE INSTRUCTIONS IN MIND:

  1. Do not cover or block any ventilation openings. When placing the device on a shelf, leave 5 cm (2”) free space around the whole device.

  2. Install in accordance with the supplied user manual.

  3. Keep the device away from heat sources such as radiators, heaters, stoves, candles, and other heat-generating products or naked flame. The device can only be used in moderate climates. Extremely cold or warm environments should be avoided. Working temperature between 0° and 35°C.

  4. Avoid using the device near strong magnetic fields.

  5. Electrostatic discharge can disturb the normal usage of this device. If so, simply reset and restart the device following the instruction manual. During file transmission, please handle with care and operate in a static-free environment.

  6. Warning! Never insert an object into the product through the vents or openings. High voltage flows through the product and inserting an object can cause electric shock and/or short circuit internal parts. For the same reason, do not spill water or liquid on the product.

  7. Do not use in wet or moist areas such as bathrooms, steamy kitchens, or near swimming pools.

  8. The device shall not be exposed to dripping or splashing and make sure that no objects filled with liquids, such as vases, are placed on or near the apparatus.

  9. Do not use this device when condensation may occur. When the unit is used in a warm wet room with damp, water droplets or condensation may occur inside the unit and the unit may not function properly; let the unit stand in power OFF for 1 or 2 hours before turning on the power: the unit should be dry before getting any power.

  10. Although this device is manufactured with the utmost care and checked several times before leaving the factory, it is still possible that problems may occur, as with all electrical appliances. If you notice smoke, an excessive build-up of heat, or any other unexpected phenomena, you should disconnect the plug from the main power socket immediately.

  11. This device must operate on a power source as specified on the specification label. If you are not sure of the type of power supply used in your home, consult your dealer or local power company.

  12. Keep away from animals. Some animals enjoy biting on power cords.

  13. To clean the device, use a soft dry cloth. Do not use solvents or petrol-based fluids. To remove severe stains, you may use a damp cloth with diluted detergent.

  14. The supplier is not responsible for damage or lost data caused by malfunction, misuse, modification of the device, or battery replacement.

  15. Do not interrupt the connection when the device is formatting or transferring files. Otherwise, data may be corrupted or lost.

  16. If the unit has a USB playback function, the USB memory stick should be plugged into the unit directly. Don’t use a USB extension cable because it can cause interference resulting in failure of data.

  17. The rating label has been marked on the bottom or back panel of the device.

  18. This device is not intended for use by people (including children) with physical, sensory, or mental disabilities, or a lack of experience and knowledge unless they’re under supervision or have received instructions about the correct use of the device by the person who is responsible for their safety.

  19. This product is intended for nonprofessional use only and not for commercial or industrial use.

  20. Make sure the unit is adjusted to a stable position. Damage caused by using this product in an unstable position vibrations or shocks or by failure to follow any other warning or precaution contained within this user manual will not be covered by warranty.

  21. Never remove the casing of this device.

  22. Never place this device on other electrical equipment.

  23. Do not allow children access to plastic bags.

  24. Only use attachments/accessories specified by the manufacturer.

  25. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as the power supply cord or the plug, when the liquid has been spilled or objects have fallen into the device, when the device has been exposed to rain or moisture, does not operate normally, or has been dropped.

  26. Long exposure to loud sounds from personal music players may lead to temporary or permanent hearing loss.

  27. If the product is delivered with a power cable or AC power adaptor:
    • If any trouble occurs, disconnect the AC power cord and refer servicing to qualified personnel.
    • Don’t step on or pinch the power adaptor. Be very careful, particularly near the plugs and the cable’s exit point. Do not place heavy items on the power adaptor, which may damage it. Keep the entire device out of children’s reach! When playing with the power cable, they can seriously injure themselves.
    • Unplug this device during lightning storms or when unused for a long period.
    • The socket-outlet must be installed near the equipment and must be easily accessible.
    • Do not overload ac outlets or extension cords. Overloading can cause fire or electric shock.
    • Devices with class 1 construction should be connected to a main socket outlet with a protective earthed connection.
    • Devices with class 2 construction do not require an earthed connection.
    • Always hold the plug when pulling it out of the main supply socket. Do not pull the power cord. This can cause a short circuit.
    • Do not use a damaged power cord or plug or a loose outlet. Doing so may result in fire or electric shock.

  28. If the product contains or is delivered with a remote control containing coin/cell batteries:
    Warning:
    • “Do not ingest battery, Chemical Burn Hazard” or equivalent working.
    • [The remote control supplied with] This product contains a coin/button cell battery. If the battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death.
    • Keep new and used batteries away from children.
    • If the battery compartment does not close securely, stop using the product and keep it away from children.
    • If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

  29. Caution about the use of Batteries:
    • Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
    • Battery cannot be subjected to high or low extreme temperatures, or low air pressure at high altitudes during use, storage, or transportation.
    • Replacement of a battery with an incorrect type can result in an explosion or the leakage of flammable liquid or gas.
    • Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
    • Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or that leakage of flammable liquid or gas.
    • A battery is subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
    • Attention should be drawn to the environmental aspects of battery disposal.

INSTALLATION

  • Unpack all parts and remove protective material.
  • Do not connect the unit to the mains before checking the mains voltage and before all other connections have been made.

FEATURES:

  1. 2.2 CH Unique Fashionable Boombox with Colorful LED Light
  2. With the cool appearance, clear treble, and good stereo sound effect
  3. Supporting USB disk, Micro SD card, FM Radio, and line-in function
  4. With karaoke function, support one wired microphone input
  5. With EQ function offering dynamic sound effect
  6. 10 meters operating range
  7. With the main volume adjust knob and bass knob
  8. With a strong aluminum handle, easy to take out
  9. Built-in lithium rechargeable battery 4400mAh
  10. TWS function supported

Accessories:

Strap|

Charging cable

Lenco SPR 200 Splashproof Bluetooth Speaker FM radio USB - FIG
2

---|---
3.5mm Jack/Jack cable | User Manual

Lenco SPR 200 Splashproof Bluetooth Speaker FM radio USB - FIG
5

1. BASS 8. AUX-IN
2. PREVIOUS 9. DC 5V Charging Port
3. DIGITAL DISPLAY 10. MIC JACK
4. PLAY/PAUSE 11. USB PORT
5. NEXT 12. MICRO SD
6. POWER/VOLUME CONTROL/EQ 13. RGB color lights
7. MODE (Switch to Bluetooth, USB disk, Micro SD, FM, and AUX-IN state)

RGB light:
Long press the RGB light button to activate or deactivate the lights; Short press to change the light effect.

Playing music from a USB disk & Micro SD card:

  1. Long press the power button to “ON”.
  2. Insert a Micro SD card or USB flash disk into the slot, and the audio files stored will start to play automatically.
  3. Short press the PREVIOUS or NEXT button on the device to select songs you like, and long press to fast backward or forward.
  4. Rotate the volume knob to adjust the volume down and up.
  5. Short press the PLAY/PAUSE button to play or pause the music.
  6. Short press the EQ button to switch between 6 different equalizer settings.
  7. Please turn off the unit while without use by long pressing on the power button.

Remark: Under Bluetooth playing mode, insert Micro SD or USB will disconnect the Bluetooth and switch to play music from Micro SD or USB. Press the “MODE” button to switch back to Bluetooth mode again.

Bluetooth:

  1. Long press the power button to “ON”.
  2. Activate Bluetooth of mobile phone and search for device name “Lenco SPR200” then connect it. The unit will beep three times once connected successfully.
  3. Play the music from your mobile phone and enjoy.
  4. Short press the PREVIOUS or NEXT button on the device or on Mobile phones to select songs you like.
  5. Rotate the volume knob to adjust the volume down and up. Or adjust the mobile phones’ volume.
  6. Press the PLAY/PAUSE button on the device or on Mobile phones to play or pause the music.
  7. Short press “EQ” to choose different music styles you like among “Normal” “Rock” “POP” “Classic” “Jazz” and “Country”.
  8. Please turn off the unit while without use. Songs will play automatically after starting up.

“This product has a Bluetooth reception function, you can’t transmit any Bluetooth sound with it: this means that you can receive a Bluetooth sound signal from an external source like a smartphone.”

FM Radio:

  1. Long press the power button to “ON”, and press the “MODE” button to FM radio state.
  2. There is an internal antenna inside the SPR-200, and for the best result, you can move the position of the product to get the best reception. There is also a 3,5mm aux. cable provided with the product that you can use as an external antenna. Also for the best reception, move the cable to look for the best result.
  3. Long press the “PLAY/PAUSE” button to auto search and store FM Channels.
  4. Short press the “Play/Pause” button to switch to mute mode.
  5. Short press the PREVIOUS or NEXT button to switch the stored FM channels.

AUX-IN:
Use the supplied 3,5mm aux cable to connect “LINE OUT” of the music players like Phones/MP3/MP4 to the “AUX IN” of this speaker;
Press the “MODE” button to switch to AUX IN state;
Short press the “PLAY/PAUSE” button to be mute, second short press to relieve;
When using an external device, all functions can be controlled by the external device.

Microphone Input:
This product has one Microphone input. Plug in a microphone with a 6,35mm jack and start to talk or sing. The volume of the voice is fixed and comes with a little echo effect.

TWS (True Wireless Stereo) Function:
With the TWS function, you can combine 2 identical SPR-200 speakers as a wireless stereo speaker set.
To do this:

  1. Turn on the two Lenco SPR-200 speakers which you want to set up. Both have to be in Bluetooth mode.
  2.  Press and hold the “PLAY/PAUSE” button (4) for about 4 seconds on one unit. The speaker will show “BU” on the display. It will make a “di” sound 3 times when the pairing was successful.
  3. Make a Bluetooth connection with your mobile phone/tablet/computer (if not already made) to play music through the TWS paired Speakers.
  4. When you want to exit the TWS mode, press and hold the “PLAY/PAUSE” button (4) on one of the units for 4 seconds again to exit the TWS function. The speaker will make a “di” sound 2 times and show “BT” on the display.

NOTE: the TWS function can only be used in Bluetooth mode.

REMARKS:

  1. Press the MODE button to switch the different modes, the order is Bluetooth, USB disk, Micro SD, FM radio, and AUX-IN.
  2. Turn off the unit while without use.

CHARGING:

  1. The charger is not included in the accessories. Please use the universal 5V/1A charger to charge this device. Put the provided charge cable into the charging jack, connect the other end to the charger, the charging indicator will keep lighting.
  2. Charge time should be 6 to 8 hours. When charging full, the indicator light will switch off.

SPECIFICATION:

Bluetooth range: up to 10 meters
Bluetooth version: 4.2
Speakers: Tweeter Size: 3 inches x 2

Subwoofer Size: 4 inch x 2
Connections:| USB and Aux-in 3.5mm jack connection
Power supply:| Built-in rechargeable lithium battery 4400mAh, 7.4V
Playtime:| up to 14 hours (at 30% volume in USB mode)
Recharge power:| DC 5V 1A (USB-to-micro USB charging cable included)
Product size:|  533(L)178(W)239(H)MM

Guarantee

Lenco offers service and warranty in accordance with European law, which means that in case of repairs (both during and after the warranty period) you should contact your local dealer.

Important note: It is not possible to send products that need repairs to Lenco directly.
Important note: If this unit is opened or accessed by a non-official service center in any way, the warranty expires.
This device is not suitable for professional use. In case of professional use, all warranty obligations of the manufacturer will be voided.

Disclaimer
Updates to Firmware and/or hardware components are made regularly. Therefore some of the instructions, specifications, and pictures in this documentation may differ slightly from your particular situation. All items described in this guide are for illustration purposes only and may not apply to a particular situation. No legal rights or entitlements may be obtained from the description made in this manual.

Disposal of the Old Device
This symbol indicates that the relevant electrical product or battery should not be disposed of as general household waste in Europe. To ensure the correct waste treatment of the product and battery, please dispose of them in accordance with any applicable local laws or requirements for the disposal of electrical equipment or batteries. In so doing, you will help to conserve natural resources and improve standards of environmental protection in the treatment and disposal of electrical waste (Waste Electrical and Electronic Equipment Directive).

CE Marking
Hereby, Lenco Benelux B.V., Thermiekstraat 1a, 6361 HB Nuth, The Netherlands, declares that this product is in compliance with the essential EU directive requirements.
The declaration of conformity may be consulted via techdoc@commaxxgroup.com

Service
For more information and helpdesk support, please visit www.lenco.com
Lenco Benelux BV, Thermiekstraat 1a, 6361 HB Nuth, The Netherlands.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals