ARIES GOLD G 7013 Belfast Moon Men Leather Watch User Manual
- June 5, 2024
- ARIES GOLD
Table of Contents
ARIES GOLD G 7013 Belfast Moon Men Leather Watch
TIME STANDARD
Type of Quartz : Tuning fork
Frequency : 32,768Hz
Accuracy : Monthly rate: Less than 20 seconds per month at
normal temperature range
FUNCTION
Stopwatch: Up to 1 minute in 1 /10 second up to (2 second per round)
60 minutes in 1 second split time
Sun & Moon disc (synchronized regular hour-hand)
INSTRUCTION MANUAL
[ Displays & Buttons ]
- The measurement time indicated by the stopwatch hands that move independently of center hands.
- Stopwatch 1/10 second hand moves for a first minute.
After one minute, it indicates the measurement time when it is stopped.
ADJUSTING THE STOPWATCH HAND POSITION
Before setting the time, check if the stopwatch 1/10 second, second and minute
hands are in the “0”(12 o’clock) position.
*If the stopwatch is in use , press the button in the following order to reset it , and then , check if the hands return to “0” position. (For details, see “HOW TO USE THE STOPWATCH”)
- If the stopwatch is counting : A → B
- If the stopwatch is stopped : B
- If the split time is displayed : B → A → B
If either of the stopwatch hands are not in the “O” position , reset them following the procedure below.
-
Pull out the crown.
-
Press button A or B to reset the stopwatch 1/10 second , second and minute hands to “O”position.
By pressing button A set the Stopwatch 1/10 second hand.
By pressing button B set the Stopwatch second and minute hands.
-
Push the crown back to the normal position.
- The stopwatch minute hand moves correspondingly with the stopwatch second hand.
- The hands move quickly if the respective buttons are kept pressed.
TIME SETTING
- Pull out the crown when the second hand is at the 12 o’clock position.
The second hand will stop on the spot.
-
Do not press any button. Otherwise, the chronograph hands will move.
-
Turn the crown to set the hour minute hands to the desired time.
As the hour hand moves, the Sun & Moon disc also moves correspondingly.When setting the hour hand, check that the Sun & Moon disc is set property.
(Check that AM / PM is set correctly)
-
Push the crown back in to the normal position in accordance with a time signal.
-
HOW TO USE THE STOPWATCH
- The measurement time is indicated by the stopwatch hands that move independently of the center hands.
- The stopwatch can measure up to 60 minutes in second.
(Standard measurement)
(Accumulated elapsed time measurement)
*Restart and stop of the stopwatch can be repeated as many times as necessary by pressing button A.
(Split time measurement)
- Measurement and release of the split time can be repeated as many times as necessary by pressing button B.