BLUETTI EB3A Portable Power Station User Manual

: June 5, 2024
: Bluetti

BLUETTI EB3A Portable Power Station

Thank You

Thank you for making BLUETTI a part of your family.
From the very beginning, BLUETTI has tried to stay true to a sustainable future through green energy storage solutions for both indoor and outdoor use while delivering an exceptional eco-friendly experience for our homes and our world.

That’s why BLUETTI makes its presence in 70+ countries and is trusted by millions of customers across the globe.
globe

Before You Begin

The information contained herein is subject to change without notice.
For the latest version, please visit https://www.bluettipower.com/pages/user- guides.

The user manual contains instructions and notes on the operation and use of this unit.
BLUETTI recommends that you use genuine accessories from BLUETTI.
BLUETTI shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the BLUETTI.
For your safety and benefit, please read carefully before using and keep it handy for future reference.

Instructions

BLUETTI products are developed to be safe and reliable. Please read this guide for important safety information about your device. The guide is intended to help you be more comfortable and productive while using this device. Failure to follow these guidelines for proper set up, use, and care for your device may cause damage to this unit and injury to yourself or others.
SAVE THESE INSTRUCTIONS!

General Safety

Always operate or store the unit in accordance with specified temperature range.
DO NOT expose the unit to fire, liquids, sweat, dirt or other contaminants, as that may cause the battery to explode or leak flammable liquid or gas.
DO NOT place the unit on an unstable or tilted surface.
Make sure the place where you are using the unit is well ventilated and spacious.
Keep away from children and pets.
DO NOT modify, attempt to insert foreign objects into the battery, or immerse or expose it to water or other liquids. Batteries may explode if damaged.
Battery fluid is corrosive and may be toxic. If a battery leaks, keep the leaked fluid from touching your skin, eyes, clothes, or other surfaces. Immediately flush the affected areas with water, or seek medical help.
DO NOT ignore those warning signs on components or products made by manufacturers.
DO NOT dismantle, cut, crush, puncture, or otherwise damage the unit in any way.
DO NOT insert foreign objects into the fan, vents, ports, or other openings.
NEVER use a damaged battery or component. Improper use or misuse of damaged batteries may cause damage to your device or injury to yourself as a result of battery fluid leakage, fire, overheating, or explosion.
Use approved battery and accessories ONLY. Improper use, or use of unapproved or incompatible batteries or components may result in a risk of fire, explosion, or other hazards, and may invalidate any approval or warranty.
Turn off the unit IMMEDIATELY in case of malfunction.
Use dry powder fire extinguisher in case of fire.
DO NOT attempt to modify, replace the internal battery or any other component of the unit by anyone other than qualified personnel. If necessary, take it to an authorized service center as incorrect reassembly may result in a risk of fire or electric shock.
SAVE THESE INSTRUCTIONS!

Maintenance

When not using the unit for extended periods of time, power off the unit and disconnect the AC adapter from the outlet.
Charge the unit to 80% SOC every 3-6 months for long-term storage.
When the battery capacity drops to 20%, charge the EB3A to extend battery lifespan and do NOT power devices with 400W and above.
Clean the unit with a dry cloth gently and carefully.

Handling and Storage

Use mechanical assistance as needed (e.g. trolleys and adjustable height workbenches).
DO NOT stack anything on top of the unit either in storage or in use.
Recommended storage temperature: 14-113°F/-10-45℃.

What’s In The Box

Standard Packaging

EB3A Portable Power Station
Warranty Card
AC Charging Cable
User Manual

Below accessories are not included in standard packaging and can be purchased at
https://www.bluettipower.com/

Car Charging Cable
Solar Charging Cable
USB-C to USB-C Cable

AC Charging Cable: 71in/180cm.
Car Charging Cable: 28in/72cm, 16AWG, Cigarette Lighter Port to DC7909.
Solar Charging Cable: 59in/150cm, 16AWG, MC4 to DC7909.
USB-C to USB-C Cable: 59in/150cm, 16AWG.

Note: Package details are subject to change without prior notice.

Product Overview

Diagram

Cigarette Lighter Port
DC5521 Port
DC Power Button
DC Input Port
AC Input Port
AC Circuit Breaker*
Wireless Charging Pad
LCD Screen
LED Lamp
LED Lamp Button
USB-C Port
USB-A Port
AC Output Port
AC Power Button

A circuit breaker is an electrical safety switch designed to protect your unit from damage caused by overcurrent or short circuit. When the AC current exceeds 10A, it will trip automatically. Press it once to reset the unit after these symptoms cleared.

Specifications

Item\Product	EB3A US	EB3A EU/UK/AU

Cigarette Lighter Port *1

| Voltage| 12VDC
Current| 10A

DC5521 *2

| Voltage| 12VDC
Current| 10A

USB-A *2

Operation

LCD Screen

a: ECO Mode
b: Turbo Charging
c: Low-battery Alert
d: Input Power
e: Output Power
f: Battery Capacity
g: AC Frequency
h: Temperature Anomaly Alert
i: Short-circuit Alert
j: Overload Alert
k: Remaining Time Indicator*
l: UPS Indicator
m: AC Indicator
n: DC Indicator
This indicator tells the remaining charge/discharge time.

Powering On/Off

Powering on: Press and hold the AC/DC Power Button for 1s to start up corresponding output.

Green light(on the button)	ON
LCD Display	ON

Note: Please turn on the DC power to enable the wireless charging.
Press any button, the LCD screen will stay on for 30 seconds.
Powering off: Press and hold power buttons to shut down corresponding output.

Green light(on the button)	OFF
LCD Display	OFF

Note: Press and hold any button for at least 3s, the unit will be off.

Standard Mode

Setting Mode: When the AC power is off and LCD screen is on, press and hold AC and DC power buttons simultaneously for 2s. The AC frequency indicator will flash.
Press and hold AC and DC power buttons simultaneously to exist ‘Setting Mode’ .

Note: If the unit has been idle for 1 minute under ‘Setting Mode’ , it will automatically exit ‘Setting Mode’ and the setting changes will not be saved.
ECO Mode: Under ‘Setting Mode’, press the DC power button to turn it on/off

Note: When on this mode, the AC/DC output will automatically turn off after 4-hour low (≤10W for AC, ≤1W for DC) or no load to save power.
Power Lifting Mode: Enable in BLUETTI App

Note: When on this mode, both output voltage and current can be adjusted to a higher level for running high-powered heating devices like space heaters and electric irons.
Do NOT use this unit to run an air conditioner or washing machine.

UPS

UPS Bypass Mode: Connect the EB3A with the AC power and the ‘UPS’ will be on display. Then turn on the AC output.

When on this mode, the AC power will directly support the loads on AC output ports and charge the EB3A.

Note: Max. output power: 600W.
The AC inverter is disabled under UPS Bypass Mode.
The unit won’t enter this mode unless connecting with AC power AND turning on the AC output.
UPS

Setting

AC Frequency¹ : Under ‘Setting Mode’, press the AC power button to switch.

¹AC Frequency: The number of alternating cycles per second in an AC sine wave. The utility frequency in US is generally 60Hz.

APP

Download BLUETTI App from Google Play or App Store.
Log in and pair with EB3A.

Note: Press ‘ ’ to customize your settings.
Keep your phone no more than 5m/16.4ft away from the unit during the update.
Available functions may vary depending on the version of your BLUETTI App. Please download the latest version for updated features.
APP

Charging

AC Charging
Simply plug the EB3A into the standard wall outlet and start charging.

Note: EB3A supports Standard(268W)/Turbo/Silent charging modes. Turbo/Silent mode can be enabled on BLUETTI App.
AC Charging

PV Charging
Connect the solar panels (in series or parallel) to EB3A via the solar charging cable.

Note: Please make sure your solar panels comply with:
OCV2 : 12-28V Input Current: 8.5A Max. Input Power: 200W Max
PV Charging

Car Charging
Connect the EB3A directly to the vehicle plug-in cigarette lighter port via the car charging cable.

Generator Charging
Connect the EB3A with the generator via the AC charging cable.

Note: Please select the generator with compliant and stable voltage.

Discharging

Iphone13 12-17 Times 13Wh
MacBook 5-6 Times 49.9Wh
Drone 5-6 Times 43Wh
Camera 10-15 Times 16.4Wh
Power Tool 2.5-3Hrs 80W
Refrigerator 2-2.5Hrs 90W

268.8Wh × DoD × η ÷ (load power) = charging time (estimated)

Note: DoD refers to the Depth of Discharge, η is the local inverter efficiency. DoD=80-90%, η=90%. DoD may vary depending on ambient-operating temperature and discharge rate. Load power and charging time are measured in Watt and Hour.

Technical Support

Should you require any further assistance, please do not hesitate to contact BLUETTI service team.

BLUETTI POWER INC

Web: https://www.bluettipower.com/
Tel: 833-988-3663 / 702-463-4792
Mail: service@bluettipower.com
Add: 6185 S Valley View Blvd Ste D. Las Vegas, NV 89118.

DOWNLOAD RESOURCES

BLUETTI EB3A Portable Power Station [pdf] User Manual EB3A, 268Wh or 600W Portable Power Station, EB3A 268Wh or 600W Portable Power Station, Portable Power Station, EB3A Portable Power Station
Read more: https://manuals.plus/bluetti/eb3a-portable-power-station-manual#ixzz7iC4X7hGp

FAQ’S

What is the difference between BLUETTI EB3A and BLUETTI EB3?

BLUETTI EB3A is a multi-functional power station that can be used to charge your devices and power your home. It has a built-in inverter that allows you to use it as a power source for your home appliances.

How much power can I get from the BLUETTI EB3A?

The EB3A can deliver up to 3,000W of continuous power.

How long does it take to charge my device from 0% to 100%?

It depends on the device. For example, it takes about 3 hours to charge an iPhone X from 0% to 100%.

Can I use the inverter to power my AC devices?

Yes, you can use the inverter to power AC devices at home. You can also use the inverter to charge mobile devices such as phones and tablets. The maximum output is 3000W.

Can I use this device in an RV or car?

No, you cannot use this device in an RV or car.

What is the input voltage range of this device?

The input voltage range of this device is 10V-32V DC. You can connect this device with a 12V car battery or a solar panel with a maximum output voltage of 32V DC. If you want to connect it with a 24V car battery or 48V solar panel, please contact our customer service team for help.

Is there a button to turn on/off the wireless charging?

Yes. Press the DC Power Button to enable the wireless charging.

Can it charge and discharge at the same time?****

Yes. It supports pass-through charging. EB3A comes with the premium LiFePO4 battery and proprietary Battery Management System to ensure that it can charge and discharge at the same time.

How do I know whether my devices will work well with this product?

Please evaluate the total constant load of your appliances. If it doesn’t exceed the Max. output power of EB3A, you can use this power station to charge.

Can a portable power station run a TV?

Yes. You can absolutely power a TV with the modern Li-Ion Battery Power Stations. I tested a number of solar battery power stations on my own 65-inch TV, and every battery station great then 240 watts worked like a charm.

What kind of battery does Bluetti use?

The Bluetti B300 Expansion Battery Module is equipped with a LiFePO4 battery with a capacity of 3072 Wh (3500 life cycles).

How do I charge my EB3A?

Charging. Simply plug the EB3A into the standard wall outlet and start charging. Note: EB3A supports Standard(268W)/Turbo/Silent charging modes. Turbo/Silent mode can be enabled on BLUETTI App.