Jabra Elite 75t Pairing Mode: Easy Step-by-Step Instructions
- June 5, 2024
- Jabra
Table of Contents
The Jabra Elite 75t True Wireless Earbuds with Charging Case are a popular choice for those seeking high-quality, wireless earbuds. However, many users may be unsure how to pair their earbuds with their mobile devices. That’s where this guide comes in. In this guide, you will find easy step-by-step instructions on how to pair your Jabra Elite 75t earbuds with your smartphone, tablet, or mobile device. Whether you’re a first-time user or a seasoned pro, this guide will help you get the most out of your Jabra earbuds. So, if you’re ready to start enjoying your music and taking calls without the hassle of wires, read on to learn how to pair your Jabra Elite 75t earbuds with your mobile device.
Jabra Elite 75t True Wireless Earbuds with Charging Case
Instructions
How do I pair my Jabra earbuds with my mobile device?
To pair with your smartphone, tablet, or mobile device, follow these steps.
- Turn on the Bluetooth setting on your mobile device.
- Turn on your earbuds by removing them from the charging case. Alternatively, simultaneously press and hold (1 second) the Left and Right buttons. The LEDs on both earbuds will flash green.
- To enter pairing mode, simultaneously press and hold (3 seconds) the Left and Right buttons on the earbuds, until the LED on the right earbud flashes blue. The earbuds are now ready to pair with your mobile device.
- To pair, go to the Bluetooth menu on your mobile device and select the Jabra earbuds from the list. Alternatively, wear the earbuds to hear the voice guided instructions. Enter “0000” (four zeros) if you are asked for a PIN.
In daily use, when you turn on the earbuds, they will automatically reconnect with the last previously paired device, if it is turned on and within range. To pair with your smartphone, tablet, or mobile device using only the right earbud, follow these steps.
- Turn on the Bluetooth setting on your mobile device.
- Turn off the right earbud manually by pressing and holding the Right button until the LED flashes red.
- To enter pairing mode, press and hold (3 seconds) the Right button until the LED flashes blue. The earbuds are now ready to pair with your mobile device.
- To pair, go to the Bluetooth menu on your mobile device and select the Jabra earbuds from the list. Alternatively, wear the earbud to hear the voice guided instructions. Enter “0000” (four zeros) if you are asked for a PIN. If pairing is successful, your earbuds will appear in the list of connected Bluetooth devices on your mobile device. The Bluetooth connection will also be announced in the earbuds.
Note Images are for guidance purposes only. The image displayed may differ slightly from your device, however the content is still relevant and accurate. If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here. Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with a mobile device.
Applicable products
SPECIFICATIONS
| Product Name | Jabra Elite 75t True Wireless Earbuds with Charging Case |
|---|---|
| Pairing Mode | Easy Step-by-Step Instructions |
| Bluetooth Version | 5.0 |
| Charging Time | Approximately 2 hours and 20 minutes |
| Playback Time | Up to 7.5 hours on a single charge |
| Charging Case Battery Life | Up to 28 hours of total battery life |
| Water Resistance | IP55 rated |
| Voice Assistant | Works with Siri, Google Assistant, and Alexa |
| Microphone | 4-microphone call technology |
| Noise Cancellation | Active noise cancellation |
FAQ’S
How do I pair my Jabra Elite 75t earbuds with my mobile device?
Turn on the Bluetooth setting on your mobile device, turn on your earbuds by removing them from the charging case or simultaneously press and hold (1 second) the Left and Right buttons. Then, simultaneously press and hold (3 seconds) the Left and Right buttons on the earbuds until the LED on the right earbud flashes blue. The earbuds are now ready to pair with your mobile device.
What do I do if I am asked for a PIN when pairing my Jabra Elite 75t earbuds with my mobile device?
Enter “0000” (four zeros) if you are asked for a PIN.
How do I pair my Jabra Elite 75t earbuds with my mobile device using only the right earbud?
Turn on the Bluetooth setting on your mobile device, turn off the right earbud manually by pressing and holding the Right button until the LED flashes red. Then, press and hold (3 seconds) the Right button until the LED flashes blue. The earbuds are now ready to pair with your mobile device.
How do I know if my Jabra Elite 75t earbuds are successfully paired with my mobile device?
If pairing is successful, your earbuds will appear in the list of connected Bluetooth devices on your mobile device. The Bluetooth connection will also be announced in the earbuds.
What should I do if pairing is not successful when trying to pair my Jabra Elite 75t earbuds with my mobile device?
Try the pairing steps again or try pairing with a different Bluetooth device. For troubleshooting tips, see here.
Will my Jabra Elite 75t earbuds automatically reconnect with the last previously paired device?
Yes, in daily use, when you turn on the earbuds, they will automatically reconnect with the last previously paired device, if it is turned on and within range.
References
- [FAQTitle] | Jabra Elite 75t Wireless Charging - Titanium Black | FAQ | Jabra Support
- How do I pair my Jabra earbuds with my mobile device? | Jabra Elite 75t Wireless Charging - Titanium Black | FAQ | Jabra Support