SWFT-GLW-CHB Glow Electronic Rechargeable Hoverboard Nightclub User Manual

SWFT-GLW-CHB Glow Electronic Rechargeable Hoverboard Nightclub

SAFETY INSTRUCTION

THIS MANUAL APPLIES TO THE SWFT GLOW ELECTRIC HOVERBOARD.

• In order to avoid dangers that are caused by collisions, falls, and loss of control, please learn how to ride the SWFT Glow safely.
• You can learn operating skills by reading this product manual or by searching for instructional videos online.
• This manual includes all instructions for operating the SWFT Glow as well as precautions to take a while riding. Users must read it carefully and follow the instructions before operating.
• Users are solely responsible for any damage or injury caused by failure to follow or understand the instructions in this manual. SWFT can not be held liable for any damage
  or injury resulting from user violation of the instructions in this manual.

ATTENTION

1. Use only the supplied charger with this hoverboard.
   Manufacturer: SHENZHEN HYLETON TECHNOLOGY CO. LTD.
   Model: HLT-118C- 4201000

2. Read the user manual and warning labels before riding.

3. The operating temperature range of SWFT Glow is 32-104 F(0-40°C).

4. Store the SWFT Glow in a dry, well-ventilated environment.

5. Do not ride on icy or slick surfaces.

6. When transporting the SWFT Glow, be careful to avoid crashes or forceful impacts as this may damage the SWFT Glow.

LOW-TEMPERATURE WARNING
Low temperature can affect the lubrication of moving components inside the SWFT Glow Electric Hoverboard and increase internal resistance. This can cause unnecessary wear to the parts inside the device and should be avoided. Low temperatures will also significantly decrease the discharge capacity and the capacity of the battery in general.
Avoid storing or using the SWFT Glow in temperatures below 40°F/5 C.
Doing so may increase the risk of mechanical failures of the hoverboard, which may lead to damage to your hoverboard, other property, serious bodily injury, and even death.

SAFETY INSTRUCTIONS

• Keep the SWFT Glow away from heat sources, direct sunlight, humidity, water, and any other liquids.
• To prevent electric shock, explosion, injury to yourself or others, and damage to your SWFT Glow do not operate the device if it has been exposed to water, moisture, or any other liquids.
• Do not use the SWFT Glow if it has been dropped or damaged in any way.
• Repairs to electrical components of the SWFT Glow should only be performed by the manufacturer. Improper repair voids the warranty and may place the user at serious risk.
• Do not pierce, puncture or harm the exterior surface of the product in any way.
• Keep the SWFT Glow free from dust, lint, dirt, debris, and other particles that could enter the casing and damage or wear the mechanical components.
• Do not use the SWFT Glow for anything other than its intended use. Doing so may damage the device or lead to injury to yourself or others, property damage, bodily harm and/or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery packs, or batteries installed on this device to excessive heat, direct sunlight, or open flame.
• Do not allow clothing, hair, feet, hands, or anything of this nature to contact with moving parts, wheels, or the drivetrain while the motor is running
• Do not operate or permit others to operate the SWFT Glow until they understand all warnings, safety features, and instructions described in this manual.
• Check with your doctor before operating the SWFT Glow to determine if you have a medical condition that would affect your ability to use the SWFT Glow. Do not operate the SWFT Glow if you
• have a medical condition that could impair your ability to safely operate the device.
• If you suffer from neck, head, or back conditions or have had prior surgeries to those areas.
• It is not recommended that you use the SWFT Glow.
• Do not operate the SWFT Glow if you have a heart condition, are pregnant, or both.

PACKAGE CONTENTS

• SWFT Glow Electric Hoverboard
• Charging Cable
• Operation Manual

FEATURES/ PARTS

1. Fedner
2. Left Foot Mat
3. Running Indicator
4. Battery Indicator
5. Right Foot Mat
6. Tire
7. LED Light
8. Charge Port (Located in Rear)
9. Power Button (Located in Rear)
10. Wireless Speaker

PRINCIPALS OF OPERATION

The SWFT Glow uses digital electronic gyroscopes and acceleration sensors to control balance and motion, depending on the user’s center of gravity. The device also uses a digital control system to drive motors that are located within the wheels.
This device has a built-in inertia dynamic stabilization system that can help assist with balance while moving forward and backward, but not while turning.

SPECIFICATIONS

• Model: SWFT Glow (SWFT-GLW)
• Net Weight: 18.87lbs. (8.56 kg)
• Load: 44-220 lbs. (20-100 kg)
• Max Speed: Up to 7 mph (11.2 km/h)
• Max Distance Range: Up to 7 miles (11.2 km)
• Max Incline Angle: 12
• Minimum Turning Radius: 0°
• Battery Type: Lithium-ion
• Battery Voltage: 36 V
• Battery Capacity: 4.0 A
• Motor Power: B 250Wx2
• Wheel Size: 8 Inches (20.3 cm)
• Product size: (W x D x H)/ 23.8 x 8.61x 8.09 in / 60.46 x 21.88 x 20.56 cm
• Bluetooth Range: Up to 26ft
• Bluetooth Speaker: V4.0 with stereo sound quality

FOR CONTROLS AND DISPLAY PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY. TURNING YOUR DEVICE ON/OFF

To Power On: 1. Take your SWFT Glow out of the box and place it flat on the floor. 2. Press the power button located on the rear of your device once. 3. Check the LED indicator located in the center of your device. 4. The battery indicator light should be lit, indicating the SWFT Glow is powered on.

To Power Off: 1. Press the power button once.

This model also has a self-balance function. Generally, the SWFT Glow will activate the self-balance function when the a not activate the self-balance function, please
press the power button twice while the hoverboard is on.

MAT SENSOR
There are four sensors under the foot mats on your SWFT Glow. When riding the hoverboard, you must ensure you are stepping on the foot mats. Do not step or stand on any other area of your hoverboard.
The SWFT Glow may vibrate or spin in one direction if weight and pressure are applied to only a one-foot mat.

BATTERY INDICATOR

The battery indicator LED is on the display board in the middle of the SWFT Glow.

• Green LED light indicates the hoverboard is fully charged.
• Red flashing LED light and beeping indicates low battery.
• Yellow LED indicates the board is charging.
• When the LED Ilight turns red, please recharge the device.

RUNNING INDICATORS

When the operator triggers the foot mats, the running indicator LED will light up, which means that the system has entered the running mode.
If there is an error in the system during operation, the running LED light will turn red (for details on system errors see SAFETY ALERTS).

BLUETOOTH SPEAKER

The SWFT Glow has a powerful built-in wireless speaker. Using the built-in speaker, you can play your music while riding.

PAIRING THE SPEAKER

1. Turn on your SWFT Glow and the speaker will Ping to announce that it is waiting for a Bluetooth® connection. This will indicate your SWFT Glow speaker is now in pairing mode.

2. Place the hoverboard and the Bluetooth® device you would like to pair within operating distance (See SPECIFICATIONS for Bluetooth® range limits). We recommend keeping the two devices no further than 3 feet apart during pairing.

3. Ensure Bluetooth® is enabled on your phone or music device.
   Refer to the manufacturer’s instructions for how to enable Bluetooth® on your device.

4. Once you have activated Bluetooth on your device, select the option “SWFT-GLW” from the list of available Bluetooth® devices.

5. If required, enter the PIN code 000000 and confirm the entry.

6. The electric scooter will say “Paired” when successfully paired.

7. Please note, that pairing mode on the hoverboard will last for two minutes. If no devices are paired after two minutes, the hoverboard speaker will automatically return to standby mode.

8. If pairing is unsuccessful, turn off the hoverboard first and re-pair following steps 1 through 7.

9. If your smartphone is out of range, or the battery is low on your SWFT Glow, your speaker may disconnect from your smart device, and the hoverboard will say “Disconnected”. Ensure that your

LISTENING TO MUsIC
After the SWFT Glow Bluetooth speaker has been paired to your device. You can play music through it wirelessly. Only one speaker will play music. The other speaker is strictly for safety alerts from your hoverboard. Select the track you wish to listen to on your music device and you should hear it play from your hoverboard’s Bluetooth® speaker. All volume and track controls are made using your music device. Should you encounter any problems while playing music, please refer to your device’s user manual.

SAFETY PRECAUTIONS

• Different localities and countries have different laws governing riding on public roads; you should check with local officials to ensure you are complying with these laws.
• For your safety, always wear a helmet that meets CPSC or CE safety standards.
• In the event of an accident, a helmet can protect you from serious injury and in some cases, even death.
• Obey all local traffic laws. Obey red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc.
• Ride with traffic, not against it.
• Ride defensively, expect the unexpected. Give pedestrians the right of way.
• Is green. Do not step on if the running indicator light is red.
• Do not try to open or modify your SWFT Glow. Doing so voids the manufacturer’s warranty and may cause your hoverboard to fail, resulting in injury or death.
• Do not use the SwFT Glow in a manner that would put people or property in danger.
• riding near others, keep a safe distance to avoid cllision.
• Be sure to always keep your feet on the foot mats. Moving your feet off your SWFT Glow while driving is dangerous and may cause the hoverboard to stop or veer sideways
• Do not operate the SWEI Glow while under the influence of drugs and/or alcohol
• Do not operate the SWFI GlOw it you are restless or sleepy.
• Do not ride your SWFT Glow off curbs, ramps, or attempt to operate in a skate park, empty pool, or in any way like a skateboard or scooter.
• This electric hoverboard is NOTA SKATEBOARD. Misuse of your SWFT Glow voids the manufacturer’s warranty and may lead to injury or damage.
• Do not continuously spin in place, it will cause dizziness and increases the risk of injury.
• Do not abuse your SWFT Glow, doing so can damage your unit and cause failure to the operating system leading to injury. Physical abuse, including dropping your hoverboard, voids the manufacturer’s warranty.
• Do not operate In or near puddles of water, mud, sand, stones, Travel, debris, or near rough and rugged terrain.
• The SWFT Glow can be used on paved surfaces that are flat and even. If you encounter uneven pavement, please it your hoverboard over and past the obstruction.
• Do not ride in inclement weather such as snow, rain, hail, or sleet, on icy roads, or in extreme heat or cold.
• Bend your knees when riding on the bumpy or uneven pavement to absorb the shock and vibration and help you keep your balance.

RIDING YOUR SCOOTER

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO
YOUR DEVICE, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, AND CAUSE SERIOUS BODILY INJURY OR DEATH.
Before using your SWFT Glow, be sure to familiarize yourself with the operating procedures.

OPERATING YOUR SCoOTER
Make sure the SWFT Glow is fully charged before your initial use.
For charging instructions, please read the section of this manual titled CHARGING YOUR SWFT Glow.
Stand directly behind your SWFT Glow and place your left foot on the corresponding foot mat (as shown in the diagram below). Keep your weight on the foot that is still on the ground, otherwise, the device may begin to move or vibrate, making it difficult to step on evenly with your other foot. When you are ready, shift your weight to the
foot already placed on the SWFT Glow and step on with your second foot quickly and evenly (as shown in the diagram below).

Find your center of gravity. If your weight is distributed correctly on the foot mats and your center of gravity is level, you should be able to stand on your hoverboard as if you were standing on the ground.
On average, it takes 3-5 minutes just to become comfortable standing on your hoverboard and maintaining proper balance.
Having a spotter will help you feel more secure. The SWFT Glow is an incredibly intuitive device; it senses even the smallest amount of motion. Having any anxiety or reservation about stepping on may cause you to panic and trigger unwanted acceleration.
When you first begin using your device, the easiest way to get going is to focus on your desired direction. You will notice that just thinking about which way you want to go will cause you to shift your center of gravity in that direction. This subtle movement will trigger the SWFT Glow to begin propelling you in that direction.

The device uses sensors to detect your center of gravity, which determines the direction you will move, how quickly you will accelerate and decelerate, and when you will come to a complete stop. As displayed in the diagram below, tilt your center of gravity in the direction you want to move.
To turn, focus on the direction you wish to turn and stay relaxed. You will notice that as you get comfortable on the device, it becomes easier to maneuver.

REMEMBER:
At higher speeds, it is necessary to shift your weight to overcome inertia and centrifugal force during turns, acceleration and deceleration.
If you encounter bumps or uneven surfaces, bend your knees to keep riding. If you determine that the bumps and surface imperfections are too large to ride over then dismount and carry your hoverboard to a safe operating surface. (Consult the SAFETY CHECKLIST for assistance determining safe riding surfaces)
Dismounting your SWFT Glo can be one of the easiest steps, but when done incorrectly, can cause you to fall. To property dismount,

from a stopped position, lift one leg up and step back to set your foot back down on the ground. Once your frst foot is firmly on the ground shift your weight back onto that leg, then step off completely as shown in the following diagram.

WEIGHT AND SPEED LIMITATIONS

Speed and weight limits are set for your own safety. Please do not exceed the following limits

• Maximum Weight: 220 lbs.
• Minimum Weight: 44 lbs.
• Maximum Speed: Up to 7 mph

OPERATING RANGE

The hoverboard can travel up to 7 miles on a fully charged battery in ideal conditions. The following are some of the major factors that will affect the operating range of your device.

• Terrain: Range is highest when riding on smooth, flat surfaces. Riding uphill and/or on rough terrain will significantly reduce range.
• Weight: A lighter user will have further range than a heavier user.
• Ambient temperature: Please ride and store the device under recommended temperatures. Doing so will increase the range, battery life, and overall performance of your device.
• Speed and riding style: Maintaining a moderate and consistent speed while riding will yield maximum range. Traveling at high speeds for extended periods, frequent starts and stops, idling and frequent acceleration or deceleration will decrease the overall distance.

CHARGING YOUR SWFT PRODUCT

CHARG ING THE DEVICE
Ensure that the charging port is clean and dry.

• Make sure that there is no dust, debris or dirt inside the charging port.
• Plug the charger into a grounded wall outlet. The charging indicator light on the charger will be GREEN.
• Connect the cable to the power supply (100V – 240V; 50/60 Hz).
• Align and connect the 3-pin charging cable into the charging port of the electric scooter. DO NOT FORCE OR BEND THE CHARGING CABLE INTO THE CHARGING PORT, AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK.

BATTERY CARE/MAINTENANCE

BATTERY SPECIFICATIONS

• Battery Type: Rechargeable lithium-ion battery
• Charge Time: Up to 5 hours
• Voltage: 36V
• Initial Capacity: 4.0 Ah

BATTERY MAINTENANCE

The lithium-ion battery is built into the SWFT Glow. Do not disassemble the SWFT Glow to remove the battery or attempt to separate it from the device.

• When charging the SWFT Glow, please use the enclosed 3-pin charging cable or otherwise, ensure that the battery charging conditions are met.
• Do not connect or attach the SWFT Glow or the battery to a power supply plug or directly to a car’s cigarette lighter.
• Do not place the SWFT Glow or batteries near a fire, or in direct sunlight. Heating the device and/or the battery can cause additional heating, breaking, or ignition of the battery inside the device.
• Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, rupture, or ignite.
• To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries.
• Local, state or federal laws may prohibit the disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
• Do not attempt to modify, change, or replace your battery.
• Do not use your SWFT Glow if the battery begins to emit odor, overheats, or begins to leak.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children and animals to touch the battery.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>