Panasonic AT2103 Car Navigation User Manual
- June 5, 2024
- Panasonic
Table of Contents
Car Navigation user’s manual
Model AT2103
Operating Specifications
Common Section
Sample Panel layout
Refer to “Vehicle individual specification” for the target model of each
switch. Lo type model
Audio Section/Radio Section
| Operating Function | Button No. /Name | Performing Specifications |
|---|---|---|
| Transition to the radio mode | (Softkey) AM,FM | ①Select Audio icon ( ) in the |
short cut menu, push “Source” button at the bottom of the screen, then push
“Radio”.②Select “FM Radio” or “AM Radio” to go to FM/AM mode.③To receive
radio broadcast, touch frequency in the bottomo of screen.
Reading/writing of the preset memory.| (Softkey) Favorite| In FM/AM mode, by
pressing the “Heart mark” in the top-right of the screen, you can set/remove
arbitrary frequency to/from preset memory.
USB Section
| Operating Function | Button No./Name | Performing Specifications |
|---|---|---|
| Transition to the USB mode | (Softkey) USB | ①Select Audio icon ( ) in the |
shortcut menu, push the “Source” button at the bottom of the screen, then push “USB”. ※Volume name of USB media is shown in the source list.
Playback / Pause| (softkey)
| If is pressed while playing, this unit pauses.
If is pressed while pausing, this unit starts playing.
iPod Section
| Operating Function | Button No./Name | Performing Specifications |
|---|---|---|
| Transition to the iPod mode | (Softkey) iPod | ①Select Audio icon ( ) in the |
shortcut menu, push the “Source” button at the bottom of the screen, then push “iPhone”. ※Volume name of iPod/iPhone is shown in the source list.
Playback / Pause| (softkey)
| If is pressed while playing, this unit pauses.
If is pressed while pausing, this unit starts playing.
Bluetooth Section/Registration method of Bluetooth device
| Operation Method | Screen Display Specifications |
|---|
①Touch Gear icon ( ) in the shortcut menu.
②Touch “Bluetooth & devices” in the menu.| 
③Touch “Manage devices”, then touch “Search devices” in the bottom-right of
the screen. Meantime, set the smartphone to waiting for a BT connection.|
④You can see the available devices list in the bottom-right of the window,
then select the device that you want to connect.| 
⑤You may see passcode on both H/U and smartphone. Then Approve both.|
⑥BT paring established successfully.
You may need to approve on a smartphone to transfer the phonebook.*Cold start
erase all BT paring.| 
Handsfree Section
| Operating Function | Button No./Name | Performing Specifications |
|---|---|---|
| Transition to the telephone menu screen | (softkey) Phone | ①Select Phone icon |
( ) in the shortcut menu.
②Select the function you want to use from the phone menu.
Outgoing| (softkey) Keypad| Select “Keypad” from the phone menu to go to the
dial screen.
Push the numeric button to enter a phone number, push ( ) to start a phone
call.
Audio Setup Section
| Operating Function | Button No./Name | Performing Specifications |
|---|---|---|
| Transition to the audio setup adjustment screen | (Softkey) Sound | ①Select |
Setting（ ） from the shortcut menu.
②Select “Sound & Media” from the Settings menu.
③Select “Sound tuning” from “Sound & Media”.
Bass/Mid/Treble,| (softkey) Bass/Mid/Treble| To Adjust Treble/Mid/Bass, drag the slider to the left (low) or right (high).
Balance/Fader| (softkey) Balance/Fader| To Adjust Balance/Fader, drag the
pointer or press adjust button.
Navigation Section
Location
A vehicle location is displayed by GPS, and a direction is detected with a
gyroscope. 
Since this device is always used with vehicles, it is not sold to general end
users separately. Therefore there is no user manual for this device by alone.
The following statements must be described on the user manual of the vehicle;
[For FCC]
FCC ID : ACJ932AT2105
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Radiofrequency radiation exposure information:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body. This
transmitter must not be co-located or operated in conjunction with any other
antenna or transmitter.
[For ISED] IC: 216J-AT2105
This device contains license-exempt transmitter(s)/receiver(s) that comply
with Innovation, Science, and Economic Development Canada’s license-exempt
RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20cm or more away from the person’s body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>