Shenzhen Kule Times Technology Q8 Smart Watch User Manual
- June 5, 2024
- Shenzhen Kule Times Technology
Table of Contents
Shenzhen Kule Times Technology Q8 Smart Watch
USER MANUAL
The product supports waterproof with IP67 level, it is available to wear while washing hands, swimming, in raining, etc. Do not use it when having a hot shower/bath or sauna, the vapors will get into the host, and scratch damage peripheral components. All these are beyond the scope of the warranty.
Operation Guide
Long press for switch ON/OFF the watch. Press for wake the screen and off the screen. Hold for 10 seconds and reboot the device.
Charging instruction: This product adopts magnetic force charging. Put the charging point connect to the back of the device charging pins, it will charge automatically. Support PC USB or standard 5V charger.
Caution: Do not make the magnetic charging cable any 4 pins connect with conducting material at the same time, it may cause a short circuit.
APP download method
Watch connects to the Phone, download the App “Fundo” on the Phone at first, and Reference the following 2 methods:
- Android Phone: search and download the “Fundo” app from Google Play:
- IOS phone: search and download the “Fundo” app from Apps Store; 2Scan following QR code image by browsers or by any Scanner to Download “Fundo”.
Scan QR code and Download the “Fundo” APP
Bluetooth connection
-
Android Phone: Support operating system 4.4 and above;
-
1OS phone: Support original operating system 7.0 and above:
Pair with an Android phone -
Turn on the smartphone Bluetooth switch, Enter the ‘Fundo’ menu, Select the bottom right corner, and Enter More’. Click to ‘add device’, And click to ‘Search’, It will automatically search for nearby enabled Bluetooth devices.
-
Find the watch name and pair with it, After successful pairing, the Bluetooth icon in the watch drop-down menu will be green, and the watch and the phone can search each other for the device successfully. There is vibration and ringing on the mobile phone. Click Bluetooth connect. Connectable 3.0. After successful pairing the Bluetooth icon in the watch drop-down menu will be gradient blue-green.
Pair with 1OS phone
- Turn on the smartphone Bluetooth switch, Enter the ‘ Fundo menu, and select the bottom right corner. Enter More’, Click to ‘ add device’, And click to Search’, It will automatically search for nearby enabled Bluetooth devices.
- Find the watch name and pair with it, After successful pairing, the Bluetooth icon in the watch drop-down menu will be green, At this time, A Bluetooth device is displayed on the Bluetooth menu. The interface of the mobile phone.
- Click “Bluetooth Call” on the watch ‘Search for Bluetooth devices’ Find the phone name, and match it, After successful pairing In the Bluetooth menu interface of the mobile phone, two Bluetooth devices have been connected successfully.
- The Bluetooth icon in the watch drop-down menu will be gradient blue-green, the watch and the phone can search each other for the device successfully. Through the watch – search for my device, there is vibration and ringing on the mobile phone Through the mobile phone – find the device, watch side vibration and ring.
How to setting notification:
Into phone’s’Settings-App Management”.find “Fundo”-permissions Management, turn on all allow.lnto Notifications- find “Fundo”, Turn all on allow. Into “Fundo”- “Application push”, select all allow.
Main function introduction
Phone
- Phonebook: it can synchronize mobile phone contact, view, and dial-through Bluetooth.
- Dialer: connect the mobile phone to dial, you can call at the watch.
- Call logs: it can synchronize the phone call record.
- Information: synchronize SMS content on a mobile phone.
- Notifier: Synchronize all the messages in the cellphone.
Sports
Sports mode: walking, running. hiking. biking, basketball, badminton, ping pong, football, settings, history.
Pedometer
Click to enter the pedometer menu option, slide from bottom to top, after setting personal information, put the watch on your hand, the pedometer function is turned on by default, swing your arm normally during walking, and the pedometer will count the steps and combine The total number of steps calculates the calories burned. After the data is generated, the Bluetooth connection with the mobile phone is successful, the watch and the mobile phone can search for each other successfully, and the mobile phone APP can click Sync data to synchronize the steps of the watch; if you need to re-count the steps (operation steps: watch settings restore factory settings watch Automatic restart).
Sleep monitor
- Sleep is turned on automatically, and sleep time is from 21:00 to 9:00 in the morning.
- After the Bluetooth connection between the watch and the mobile phone is successful, click Sync Data on the APP of the mobile phone to synchronize the sleep data on the watch.
Heart rate
- Close the watch to your wrist to measure the real-time heart rate.
Blood pressure
- Enter the blood pressure menu, put the front of the watch on your arm, and click Start, the watch will automatically measure the blood pressure value, and the measured blood pressure will be synchronized to the APP
Oxygen
- Enter the blood oxygen menu, put the front of the watch on your arm, and click start, the watch will automatically measure the blood oxygen value, and the measured blood oxygen will besynchronized to the APP.
ECG
- Enter the ECG menu, place the front of the watch on your arm, and click Start, the watch will automatically measure the ECG value, and the measured ECG will be synchronized to the APP.
Camera
- When the phone cannot be locked, the watch enters the Bluetooth camera, the phone enters the camera interface, tap the watch to take a photo, and the photo is stored on the phone.
BT music
- Enter the music menu and click play to successfully play the music on the phone.
Find Phone
- Click find phone”, the connected phone will be ringing warning, after finding the phone, tap “End” of the phone to stop the alarm, it works both watch and Apps sides.
Sedentary
- You can set the time period by yourself (at 30-minute intervals, minimum Om–300m maximum) when the sedentary time is reached, the watch will ring and vibrate to remind you to get up
Alarm
Customize the alarm time, a number of rings, ringtones, and reminder types.
Stopwatch
- Click the button in the lower-left corner to start timing. In this interface, click the button in the lower right corner to continue timing, click the button in the lower left corner to pause timing, and slide the screen up and down to view historical data; when the stopwatch is paused, click the button in the lower right corner to clear data.
Calculator
- Enter the calculator, click on the soft keyboard to enter data, and perform calculations.
Calendar
- To view the current date, click the rose-red round button to view the current monthly calendar, and swipe the screen up and down to switch months.
Theme
- Can replace 2 themes.
BT Call
- On the watch side, click Bluetooth search device, select the Bluetooth name of the mobile phone that you want to pair with click pair, and on the phone end/watch side click agrees to pair successfully.
Setting
BT Settings
- When the Bluetooth connection between the watch and the mobile phone is not successful, the Bluetooth can be turned on/off in the watch settings.
About
- Can view the watch’s Bluetooth name, device address, Bluetooth address, and watch software version number.
Power saving
- Turn on to enter power-saving mode.
New notification bright
- The watch synchronizes new messages from the paired mobile phone, and the watch’s bright screen reminds.
Weather
- The watch synchronizes the weather.
Units
- You can switch watch metric and inch display.
Motion
- Gesture wake-up system: when on, tilt the watch to turn off the screen, flat watch on the screen, 90 degrees in front of their own bright screen.
Swing menu page: Shake the watch menu to turn pages in the first-level menu interface. Shake to answer the call: shake the watch two or three times to answer the call.
Sound
- You can select the incoming call profile, select the ringtone, select the notification ringtone; volume, adjust the volume of multimedia, ringtones, notifications, etc.
Volume
- Set the volume of multimedia, ringtones, and notifications.
Display
- Set screen brightness, and backlight off time.
International
- Turn off automatic synchronization, you can choose to set various languages.
- Turn on automatic synchronization, the watch side synchronizes with the language of the paired mobile phone.
Reset
- Recovery the device.
QR Code
- Download and instal “Fundo” app.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there iS no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
RF warning statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.