Cambridge Audio CA0751 Digital Analog converter User Manual

: June 5, 2024
: Cambridge Audio

Table of Contents

Installation
IMPORTANT SAFETY INSTRUCTIONS
Documents / Resources

QUICK START
How to configure a basic system

GREAT BRITISH SOUND SINCE

Please check the DacMagic 200M support page for details of any new features, http://techsupport.cambridgeaudio.com products, audio formats, and the most recent advice on compatibility with other copies of this manual.

Cambridge Audio CA0751 Digital Analog converter-

BASIC SETUP

Installation

Cambridge Audio CA0751 Digital Analog converter - fig
1

Cambridge Audio CA0751 Digital Analog converter - fig
2

To get the best performance from your DacMagic 200M products, please read the online manual. For more information, visit our website http://www.cambridgeaudio.com/

IMPORTANT SAFETY INSTRUCTIONS

For your own safety please read the following important safety instructions carefully before attempting to connect this unit to the mains power supply. They will also enable you to get the best performance and prolong the life of the unit:

Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug having been damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR MOISTURE, AND OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHOULD NOT BE PLACED ON THIS APPARATUS.
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
TO COMPLETELY DISCONNECT THIS APPARATUS FROM THE AC MAINS, DISCONNECT THE POWER SUPPLY FROM THE AC RECEPTACLE. POUR DECONNECTER COMPLETEMENT L’APPAREIL DU RESEAU D’ALIMENTATION, DECONNECTER LE CORDON D’ALIMENTATION DE LA PRISE MURALE.
THE MAINS PLUG OF THE POWER SUPPLY SHALL REMAIN READILY ACCESSIBLE. LA PRISE DU RESEAU D’ALIMENTATION DOIT DEMEURER AISEMENT ACCESSIBLE”
USE OF THE APPARATUS IN TROPICAL CLIMATES (THE EQUIPMENT SHALL BE USED AT A MAXIMUM 45 DEGREES C AMBIENT TEMPERATURE)

Only use the power supply supplied with this unit.
WARNING: Please refer the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.

WEEE SYMBOL
**** The crossed-out wheeled bin is the European Union symbol for indicating a separate collection of electrical and electronic equipment. This product contains electrical and electronic equipment which should be reused, recycled or recovered and should not be disposed of with unsorted regular waste. Please return the unit or contact the authorized dealer from whom you purchased this product for more information.

CE MARK
This product complies with European Low Voltage (2014/35/EU), Electromagnetic Compatibility (2014/30/EU), and Environmentally-friendly design of Energy- related Products (2009/125/EC) Directives when used and installed according to this instruction manual. For continued compliance, only Cambridge Audio accessories should be used with this product and servicing must be referred to qualified service personnel.

RCM (REGULATORY COMPLIANCE MARK)
This product meets Australia, New Zealand Safety, EMC, and Radio Communications requirements of the ERAC and ACMA.

IMPORTANT – The unit will become hot when in use. Do not stack multiple units on top of each other. Do not place in an enclosed area such as a bookcase or in a cabinet without sufficient ventilation.
Ensure that small objects do not fall through any ventilation grille. If this happens, switch off immediately, disconnect from the mains supply and contact your dealer for advice.
Please ensure there is ample ventilation (at least 20cm clearance on the top, side, and rear). Do not put any objects on top of this unit. Do not situate it on a rug or other soft surface and do not obstruct any air inlets or outlet grilles. Do not cover the ventilation grilles with items such as newspapers, tablecloths, curtains, etc.

POSITIONING
Choose the installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. No naked flame sources, such as lighted candles, should be placed on the unit. Also avoid locations subject to vibration and excessive dust, cold or moisture. The unit can be used in a moderate climate.
This unit must be installed on a sturdy, level surface. Do not place in a sealed area such as a bookcase or in a cabinet. Do not place the unit on an unstable surface or shelf. The unit may fall, causing serious injury to a child or adult as well as serious damage to the product. Do not place other equipment on top of the unit.
Due to stray magnetic fields, turntables or CRT TVs should not be located nearby due to possible interference. Electronic audio components have a running-in period of around a week (if used several hours per day). This will allow the new components to settle down and the sonic properties will improve over this time.

WARNING: Do not continue using the external power supply if it is broken.

PO WER SOURCES
The unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. If you do not intend to use this unit for a long period of time, unplug it from the mains socket.

OVERLOADING
Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation, and broken plugs are dangerous. They may result in a shock or fire hazard.
Be sure to insert each power cord securely. To prevent hum and noise, do not bundle the interconnect leads with the power cord or speaker leads.

CLEANING

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an aerosol at or near the unit.

BATTERY DISPOSAL
Batteries may contain substances harmful to the environment. Please dispose of any discharged batteries with due consideration and in accordance with local environmental/electronic recycling guidelines.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.

SERVICING
These units are not user-serviceable. Never attempt to repair, disassemble or reconstruct the unit if there seems to be a problem. A serious electric shock could result if this precautionary measure is ignored. In the event of a problem or failure please contact your dealer.

FCC ID: YKBCA0751-037 IC:9095A-CA0751037
FEDERAL COMMUNICATIONS COMMISSION

Supplier’s declaration of conformity (SDoC)
Equipment: Hi-Res DAC
Model: DacMagic 200M
Trademark: Cambridge Audio
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The responsible party in the US:
Company name: Audio Partnership LLC
Address: 1913 N Milwaukee Ave. Chicago, IL 60647
Phone: 312-636-4817
Legal Representative Person: Gregg Chopper
Signature:

CAUTION: EXPOSURE TO RADIOFREQUENCY RADIATION.
The device shall be used in such a manner that the potential for human contact during normal operation is minimized.

FEDERAL COMMUNICATIONS COMMISSION NOTICE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try and correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the distance between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

RF Exposure Statement:
To maintain compliance with FCC’s RF exposure guidelines. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Use only the supplied antenna.

MODIFICATIONS
The FCC requires the user to be notified that any changes or modifications to this device that are not expressly approved by Cambridge Audio, may void the user’s authority to operate the equipment.

CANADA-INDUSTRY CANADA (IC)
This Class B digital apparatus complies with Canadian standard ICES-003.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions.
(1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with RSS-102 limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.
The transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

© 2020 Cambridge Audio Ltd.
Cambridge Audio is a brand of Audio Partnership Plc.
Registered office: Gallery Court, Hankey Place,
London SE1 4BB. Reg. No. 2953313. All rights reserved.
WWW.CAMBRIDGEAUDIO.COM
AP37488/2

For further information about Cambridge Audio, our products, news, reviews, and support, please visit: WWW.CAMBRIDGEAUDIO.COM

OUR FRIENDLY SUPPORT TEAM IS HERE TO HELP:
support@cambridgeaudio.com
UK: +44 203 514 1521
US: +1 877 357 8204
HK: +852 2499 6018

© 2019 Cambridge Audio Ltd.
Cambridge Audio is a brand of Audio Partnership Plc.
Registered office: Gallery Court, Hankey Place, London SE1 4BB. Reg. No. 2953313. All rights reserved.
WWW.CAMBRIDGEAUDIO.COM / CAMBRIDGEAUDIO

Documents / Resources

| Cambridge Audio CA0751 Digital Analog converter [pdf] User Manual
CA0751 Digital Analog converter, Digital Analog converter, Analog converter
---|---