HiFi Desktop Bookshelf Speakers Pair – 300 Watt Powered Bluetooth-Complete Features/Instruction Guide

HiFi Desktop Bookshelf Speakers Pair – 300 Watt Powered Bluetooth

Specifications

• Product Dimensions
  7.5 x 6.7 x 10.6 inches

• Item Weight
  12 pounds

• Connectivity Technology
  Bluetooth AUX

• Speaker Type
  Bookshelf

• Recommended Uses For Product
  For Computers, For Smartphones, or Tablets

• Power Output
  300 Watt MAX

• Amplifier Type
  2-Channel

• Monitor Speaker Driver
  5.25″ -inch

• Tweeter Driver
  1.0’’ -inch Dome, Aluminum

• System Channel Impedance
  4-8 Ohm

• Frequency Response
  50Hz-20kHz

• Sensitivity
  88dB

• Digital Audio File Support
  MP3 / WMA

• Maximum USB Flash Support
  Up to 16GB

• Power Cable Length
  3.9’ ft.

• Power
  120V

• Single Speaker Weight
  Active, 6.37 lbs. (Passive, 5.07 lbs.)

• Brand
  Pyle

Introduction

PBKSP22 were designed for those seeking a great audio experience from their PC speakers with limited space in mind at the same time. Provides excellent sound performance and its classical outlook makes it a perfect match for any environment. Speakers are enclosed in MDF board cabinets that offer great acoustics for the set. The sound control panel was placed on the side of one of the satellites which provide easy access to the knobs located on that panel.

Hifi studio monitor computer desk stereo speaker system – Bluetooth bookshelf speakers (300-watt max) powered bookshelf desktop speakers> performance of pro audio studio monitors Built-in Bluetooth receiver for wireless audio playback> ability to connect and stream from external devices> MP3 Digital Audio File Support USB flash drive Reader> active + passive Speaker system’s> built-in digital audio amplified> audio processing bass reflex active speaker> rear panel control center> RCA (L/R) aux audio input (active> easy connect speaker spring terminal (passive> bass, treble, Volume audio Adjustment> power Bluetooth connectivity: simple and hassle-free pairing> gets wireless audio streaming instantaneously> compatible with all of today’s latest devices (smartphones, tablets, laptops, computers, and so on.)

What’s In the Box?

• Active Bookshelf Speaker,
• Passive Bookshelf Speaker
•  Power Cable 

IMPORTANT SAFETY INSTRUCTIONS

1. Read and keep these instructions.

2. Heed all warnings.

3. Follow all instructions.

4. Do not use this apparatus near water.

5. Clean only with a dry cloth.

6. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

8. Do not defeat the safety purpose of the polarised or ground plug:
   A polarised plug has two blades one wider than the other.
   The wide blade is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.

9. Protect the power cord from being walked on or pinched particularly at the plug, convenience receptacles, and the point where they exit from the apparatus.

10. Only use attachments/accessories specified by the manufacturer.

11. Unplug this apparatus during lightning storms or when unused for long periods of time.

12. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed t rain or moisture, does not operate normally, or has been dropped.

13. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

14. The apparatus should not be exposed to dripping or splashing and no objects filled with liquids should be placed on the apparatus.

15. Use only with the battery specified by the manufacturer.

16. The power supply cord set is to be the main disconnected device.

WARNING

• This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit.
• This symbol indicates that there are important operation and maintenance instructions in the literature accompanying this unit.

Installation

Before you begin the installation make sure that the main power switch is in the OFF position and all control knobs are in the maximum left position
(rotate it counterclockwise).

1. Place the speakers such that the active speaker is on the right side. To achieve the best stereo effect listener and satellite speakers should form an equilateral triangle (each satellite should have the same distance from the listener’s ears). Preferably try to put the speakers in such a manner that the tweeter speakers are at the same height as your ears.
2. Connect the signal cable suitable for your sound source either with the Mini-Jack 3.5mm plug to the appropriate output port of your sound source (for example output of your PC’s soundcard).
3. Connect the 2-wire cable to the “Speaker output” on the back of the active speaker and to the socket on the back of the passive speaker.
4. Connect the power plug to the main socket.
5. Switch the main power switch to the ON position.
6. Start playing sound using your connected sound source.
7. Using the volume knob set up desired volume level.
8. You can adjust the played sound tones using the Bass and Treble knobs to suit your personal performances.

Wireless BT Function

The speaker connects to your compatible Bluetooth-enabled device. Allowing the system to receive your wireless Bluetooth signal and stream audio to any connected speaker systems. Press the ‘mode’ button on the rear panel of the speaker. Ensure Bluetooth ability is activated on your device and search for the Bluetooth Network Named: ’PYLEUSA’ and connect. No password is required for connecting.

Features

• Powered Bookshelf Desktop Speakers
• Pro Audio Studio Monitor Performance
• Hi-Fi Full Range Stereo Sound Reproduction
• Built-in Bluetooth Receiver for Wireless Audio Playback
• Ability to Connect & Stream from External Devices
• MP3 Digital Audio File Support
• USB Flash Drive Reader
• Active + Passive Speaker System
• Built-in Digital Audio Amplifier
• Audio Processing Bass Reflex Active Speaker
• Rear Panel Control Center
• RCA (L/R) Aux Audio Input (Active)
• Easy Connect Speaker Spring Terminal (Passive)
• Bass, Treble, Volume Audio Adjustment
• Power ON / OFF Switch

Wireless Bluetooth Connectivity

• Simple & Hassle-Free Pairing
• Instantly Receives Wireless Music Streaming
• Works with all of Today’s Latest Devices Smartphones, Tablets, Laptops, Computers, etc.)
• Bluetooth Version: 4.0
• Bluetooth Network Name: ‘PYLEUSA’
• Wireless Range: 30’+ ft.

Frequently Asked Questions

• Exactly (step by step please!) how do you pair this with Bluetooth (can guests figure it out)?  
  You don’t Bluetooth the speakers rather you Bluetooth the tuner amp thru the headphone portal.

• In the pictures, it shows the speakers on a mount. What kind of mounting holes do these speakers have, or what type of mount does it support?
  It doesn’t have a mounting hole. For more info, kindly visit our website pyleaudio.com.

• Do these speakers connect to each other; or do both speakers have ports for the l & r rca inputs (for l or r channel)?
  Yes, it is a pair of passive and active speakers. You have to connect the passive to the active speaker and then plug it into the power source. You may check other details of the unit by visiting our website pyleaudio.com.

• I ordered these and was wondering what stand will be good for them?
  I have them on the same (tv) stand as my television.

• Are they really 300 watts?
  Yes, it is a 300 watts HiFi Desktop Bookshelf Speaker.

• How do the other external speakers connect is it via blue tooth or is it hard wired?
  you have to connect the passive speaker to the active speaker via speaker wire.

• Is this Bluetooth compatible with a 4K Firestick?
  It is not compatible with firesticks.

• What is the difference between an active and a passive speaker?
  The difference is that an active speaker has built-in active (electrically powered, battery, or external AC) electronics, such as an active crossover and/or a built-in power amp. A passive speaker, on the other hand, utilizes only passive electronics, such as a passive crossover, which do not require electrical power.

• Can I hook these speakers to my bose wave what connectors?
  Yes, you can, by using the headphone jack in the back of the Wave you can use a 3.5mm male to split RCA female adapter.

• How are these 2 speakers connected to each other?
  Yes this answer is correct “speaker wire, bare wire connects to spring clips on the slave speaker, and a traditional DC adapter plug connecting to the amp speaker”

https://m.media-amazon.com/images/I/91mdbekEzlL.pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>