milwaukee CA 55 M18 Fuel Collated Screw Gun Instructions
- June 5, 2024
- Milwaukee
Table of Contents
**Nothing but HEAVY DUTY®.
CA 55
Original instructions
**
CA 55 M18 Fuel Collated Screw Gun
Technical Data, Safety Instructions, Specified Conditions of Use, Batteries,
Maintenance, Symbols
Please read and save these instructions!
| **** | **** |
|---|---|
| **** | **** |
TECHNICAL DATA
| Magazine | CA 55 |
|---|---|
| Screw diameter max. | 6,0 mm |
| Screw length | 25 – 55 mm |
| Setting range of depth gauge | ± 3,8 mm |
| Weight | 0,4 kg |
WARNING Read all safety warnings, instructions, illustrations- rations,
and specifications provided with this device. Always read the operation manual
of the connected screw driver.
Failure to follow the warnings and instructions may result in electric shock,
fire, and/or serious injury.
Save all warnings and instructions for future reference.
SCREWDRIVER SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when performing an operation where the fastener may contact hidden wiring. Fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when working with the
machine. The use of protective clothing is recommended, such as a dust mask,
protective gloves, sturdy non-slip footwear, helmet, and ear defenders.
Do not machine any materials that present a danger to health (e.g. asbestos).
When working on walls ceilings, or floors, take care to avoid electric cables
and gas or water pipes. Clamp your workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.
Switch the device off immediately if the insertion tool stalls! Do not switch
the device on again while the insertion tool is stalled, as doing so could
trigger a sudden recoil with a high reactive force. Determine why the
insertion tool stalled and rectify this, paying heed to the safety
instructions.
Possible causes can be:
- it is tilted in the workpiece to be machined
- breakage of the material to be used
- the power tool is overloaded
Do not reach into the machine while it is running.
The insertion tool may become hot during use.
WARNING! The danger of burns
- when changing tools
- when setting the device down
Chips and splinters must not be removed while the machine is running.
Remove the battery pack before starting any work on the appliance.
SPECIFIED CONDITIONS OF USE
The magazine attachment is suited for setting drywall screws when fixing
gypsum plasterboards to wood furring or metal furring.
The magazine attachment may only be used with the following drill: Milwaukee
M18 FSG
MAINTENANCE
Use only Milwaukee accessories and Milwaukee spare parts. Should components
need to be replaced which have not been described, please contact one of our
Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
Article No. as well as the machine type printed on the label and order the
drawing at your local service agents or directly at:
Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
| CAUTION! WARNING! DANGER!
---|---
| Remove the battery pack before starting any work on the appliance.
| Please read the instructions carefully before starting the machine.
| Accessory – Not included in standard equipment, available as an accessory.
| Do not dispose of electric tools together with household waste material.
Electric tools and electronic equipment that have reached the end of their
life must be collected separately and returned to an environmentally
compatible recycling facility. Check with your local authority or retailer for
recycling advice and collection point.
| European Conformity Mark
| British Conformity Mark
| Ukraine Conformity Mark
| Eurasian Conformity Mark
Copyright 2020
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
+49 )0( 7195-12-0
www.milwaukeetool.eu
Techtronic Industries )UK( Ltd
Fieldhouse Lane
Marlow Bucks SL7 1HZ