ANKEWAY AW1005 Android Car Radio User Manual

ANKEWAY AW1005 Android Car Radio

Wiring DiagramandDefine

Instructions for use

For the sake of your safety, please don’t watch the video while driving and operating a machine; Please dispatch the volume to clearly while drivin9 to the voice of the outside world. Before the operation, please read this manual and another manual system, and understand the use of manual and machine- related safety tips and warning signs, after reading in a readily accessible place for ready reference.

1.  Pay attention to traffic safety in the first place.
2.  If you meet difficulty in operating the system, please again after he parked his car in a safe place.
3.  Don’t let children operate this machine, lest cause personal injury and damage to the machine.
4.  Please follow the traffic rules when using the satellite navigation function to drive.
5.  Please do not ban the use of electronic equipment or it is forbidden to use an open flame, such as gas stations, breweries, or strong electromagnetic interference region, otherwise may cause danger.
6.  Don’t do maintenance, maintenance, or installation of the machine itself. Under the condition of the plug do not install or repair the machine, by not being trained in electronic equipment or vehicle accessories installation personnel or the lack of experience in installation and maintenance of this machine is very dangerous.
7.  Do not install the machine storage or in direct sunlight place, don’t put it in another harmful material environment, especially the LCD screen, if the installation of the LCD screen is in the air conditioner Near the air duct, please keep cool and hot air blows directly to the machine, otherwise, it may damage the machine, even on the bus or personal injury.
8.  Please do not use sharp objects painted screen, and don’t use hard objects to press the screen, otherwise will cause damage to the display or touch screen.
9.  In order to guarantee the normal operation of the machine, and prevent the occurrence of fire or get an electric shock, please don’t expose the machine in damp air, more cant a liquid drying machine.

Safety note

• Please read all instructions before installation and suggested by car audio professional installation of the machine. The machine is suitable for car 12 v power supply system (must have a grounding line), please do not install the machine in 24 v car, otherwise, it will damage the machine.
• In no professional guidance, not to replace the power fuse, use only a fuse of the improper, can cause the damage of the machine and cause a tire.
• N In order to avoid the violation of traffic rules, the driver shall not watch while driving and operating the machine, lest produce unnecessary accidents.
• For safety and ensure that the product is normal use, please to the professionals of this product installation, disassembly or repair the machine by yourself, lest cause the machine damage and accidents, for details please contact with the local professional car audie store.
• Please prevent this product in a humid environment and the water, in order to avoid short circuits caused by electric shock, or other unnecessary damage and fire happened.

Machine reset

1.  The first use of the system before or after the replacement battery, the machine must be reset.
2.  When the machine function is not normal, the machine must be reset.
3. Click restore factory Settings in the system Settings interface, make the machine is in the factory the initial state.
4.  Use a pointed object. press the RESET button on the panel, or click the system RESET in the System Settings, the machine will be RESET to turn it off, back to the factory the initial state.

Special Warm Note

All cables are labeled. The integrated end is connected to the serial interface on the back of the radio. The decentralized end is connected to the car cable. If your car’s original ISO cable is not compatible with this device, you need to buy an adapter cable compatible with your model for wiring. You can also remove the original ISO serial interface of your car before wiring.

Main Cable Wiring Diagram

• RL/RR/FL/FR: to 4 speakers.
• ANT-CONT: to Antenna (No antenna no wiring).
• Lamp Control: to car front small light.
• Back: to rear camera s ignal input cable.
• KEY1(KEY2): Use only one of the cables to connect the signal output cable of the car’s SWC. If “KEY1″is not compatible, select”KEY2”.
• GND: to battery negative/iron/ ground.
• B+: to car battery positive.
• ACC: to car ignition detection cable.

Video/Audio/Amplifier/WiFi/BT/MIC

• FRONT R/L OUT: Connecttotheamplifier Audio Input
• Special Note: Whether you need the Rear Camera or not, you must connect the”CAMERA” Cable to the 10-pin port on the back of the radio to ensure that the radio gets better WiFi and Bluetooth signals.

Reversing Camera wiring diagram

• Wiring A: Combine the “short red cable” with the “Back” cable and connect to the car reverse detection cable.
• Wiring B: Combine the two “short red cables” and connect to the positive pole of the car’s taillight.
• Wiring C: Connected to the radio reversing video input port (10-pin)

Side Button Debugging & Calibration

Debugging Method:

•  Step 1: Turn on the radio, press and hold the screen with 5 fingers until 4″ round options” appear. Then click on the 4 “round options” (from1to4).
•  Step 2: Click the “Start” option will turn red and start calibration.
•  Step 3: Click the “Power” option will turn red and then click the power button on the left side of the screen. If “Power” returns to black, the calibration was successful. Then use the same method to correct the remaining buttons. Click the “Close” option after the calibration is completed.

Side Button Debugging and calibration

Click the “Power” option will turn red and then click the power button on the left side of the screen. If “Power” returns to black, the calibration was successful. Then use the same method to correct the remaining buttons.Click the “Close” option after the calibration is completed.

Android Settings

Sprach- und Zeiteinstellungen

How to Connect Bluetooth

•  Radio Bluetooth Name: Car BT
•  BT connection Pin: 0000
•  Connected: “Red” phone name
•  Failed: “Blue” phone name
•  Search / Remove connectable devices

EQ & SpeakersSettings

•  EQ: Pop / Jazz / Rock / Classic / Custom
•  Speakers Settings: Custom/ Default

GPS Navigation

•  iGO
•  Google Maps
•  “iGO” App
•  EuropeMapOfflineData
• SWC Settings

SWC Debugging:

•  Step 1: Click “Settings” tofindthe”Steering Learn” for theSWCsystem.
•  Step 2: Press the control button on your car’s steering wheel and don’t let go, then click the corresponding control button on the screen to complete the debugging. Then debug the thenextbutton.
•  Step 3: After you finish debugging

ANKEWAY External SteeringWheel Control

• ANKEWAY (ANKEWAYUK) Store sells an external Steering Wheel Control that is perfectly compatible with Android radio.
• We recommend you to buy it and fix it on the steering wheel.
• Connect the “KEY1” and “KEY2” cables of the external steering wheel control to the “KEY1” and “KEY2” of the radio.
• The red cable is connected to the “ACC” of the radio, and the black cable is connected to the “GND” of the radio

Easy ConnectionforMirror-link

•  Download and install App”EasyConnection” for android phones(GooglePlay).
•  iPhone does not need to install this App.

How to Connect and Use (for Android Phone)

• Step-1, Install Google Assistant for voice command.
• Step 2, Connect the radio and mobile phone via USB (or WiFi) to play video.
• Step 3, Connect the radio and mobile phone via Bluetooth to play audio.
• Step-4, Cick App “Easy Connection” on the phone and radio.
• Step-5, Follow the App operation prompt to complete Mirror-link.

How to Connect and Use (for iPhone)

• Step-1, Connect the radio and mobile phone via USB (or WIFi).
• Step-2, Click App “Easy Connection” on the radio.
• Step-3, Follow the operation prompt to complete Mirror-link.

Factory Settings

• Password: 8888
• Tips: t is not recommended to restore the factory settings if not necessary
• Software Settings
• Hardware Settings

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>