Shenzhen TYH-60042 Magnetic wireless power bank Instruction Manual
- June 5, 2024
- Shenzhen
Table of Contents
Shenzhen TYH-60042 Magnetic wireless power bank
Product introduction
Thank you for using this product. This product is a high-capacity, high-
quality use of Lithium polymer battery and charge-discharge chip, in safety,
efficiency, Compatibility and other aspects have outstanding
performance.
This product uses USB-A interface to
charge the equipment. When discharging, the indicator lamp shows the informat
ion of the electric quantity as follows:
Specification
- Magnetic Wireless Power Bank
- Model:TYH-60042
- Battery Capacity: 4000m Ah
- Input:Micro USB:5V/2A
- Output:USB-A:5V/2A
- Wireless Output: 5W
- Size: 107×66.5X13.5MM
- Weight: 13610g
Warning
- Before using this product, please read the product description carefully, and follow the instructions to operate correctly.
- Please do not disassemble the device by yourself.
- This product is not equipped with any parts and accessories that can be disassembled maintained by yourself.
- Please do not choose to meet local safety standards (such as China 3C certification standards) charger for this product charging, in order to prevent electric shock or lead to brokern battery.
- Do not apply heavy pressure, tap the product and avoid using the product in case of serious drop or strong vibration, or if liquid penetrates / spills into the product, which may cause battery, circuit damage or short circuit, please stop using i imnediately and dispose of it properly.
- This product occurs expansion, deformation, leakage, capacity, such as obvious decline, please immediatelyy stop using and properly deal with.
- In hot weather, please do not put this product in the outdoor unattended car or other sunburnt places, so as to avoid danger.
Notice
- For the first time use, please charge the product fully.
- When charging this product or using this product to charge other equipment, please choose the suitable charger and data line.
- When charging the product, make sure that someone is present. Please unplug the power when yougo out or Ieave for a long time.
- If there is no power indication after pressing the key, it may be in a protected state, and can be connected to the external charger t0 try to recover.
- If you do not use this product for a long time, please keep the power in the range of 25%-50% and store itin a cool and dry environment. Avoid the state of full or no power long-term storage of this product to extend battery life.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interterence to radio communications. However, there is no guarantee that interterence will not occur in a particular installation. It this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interterence by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit difterent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interterence that may cause undesired operationo