BOSCH 18V-26 Easy Cordless grass trimmer User Guide

: June 5, 2024
: Bosch

Table of Contents

BOSCH 18V-26 Easy Cordless grass trimmer
Safety Notes
Symbols
Intended Use
Deliver scope (see figure B)
Product Features (see figure A)
Technical Data
Noise/Vibration Information
Mounting and Operation
Assembly
Switching on
Operation
Troubleshooting
After-Sales Service and Application Service
Transport
Disposal
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BOSCH 18V-26 Easy Cordless grass trimmer

Safety Notes

Warning! Read all safety warnings and all instructions. Make yourself familiar with the controls and the proper use of the product. Please keep the instructions safe for later use!
Explanation of symbols on the machine

General hazard safety alert.
Read instruction manual.
Make sure that bystanders are not injured by foreign objects being thrown away.
Warning: Keep a safe distance to the product when operating.
Not applicable.
Remove battery before adjusting or cleaning, and before leaving the machine unattended for any period.
Wear eye and ear protection.
Do not use the product in the rain or leave it outdoors when it is raining.

Make sure that bystanders are not injured by foreign objects being hurled away.
Warning: Keep a safe distance from the machine when operating.
Carefully check the area where the tool is to be used for wildlife and pets. Wildlife and pets may be injured while the machine is in operation. Thoroughly check the working area and remove any stones, sticks, wires, bones and foreign objects. When using the machine, ensure that no wildlife, pets or small tree stumps are hidden in the dense grass.

General Safety Warnings for Trimmers

Read all safety warnings, instructions, illustrations and specifications provided with this machine. Failure to follow the safety warnings and instructions may result in elec-tric shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.
The term machine in the warnings refers to your mains-operated (corded) machines or battery-operated (cordless) machines.

Work area safety

Keep work area clean and well lit. Cluttered or dark areas invite accidents.
Do not operate the machine in ex-plosive atmospheres, such as in the presence of flammable liquids, gases or dust. Machines create sparks which may ignite the dust or fumes.
Keep children and bystanders away while operating the machine. Distractions can cause you to lose control over the machine. Never operate the machine while people, especially children or pets, are nearby.

Electrical safety

The plug of the machine must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
Do not expose the machine to rain or wet conditions. Penetration of water in the machine increases the risk of an electric shock.
Never use the cord for carrying, hanging up or unplugging the machine. Keep cord away from heat, oil, sharp edges and moving parts. Damaged or entangled cords increase the risk of electric shock.
When operating a machine outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
When operating the machine in damp environments is unavoidable, use a residual current device (RCD). The use of a residual current device (RCD) reduces the risk of electric shock.

Personal safety

Stay alert, watch what you are doing and use common sense when operating the machine. Do not use a machine while you are tired or under the influence of drugs, alco-hol or medication. A moment of inattention while operating the machine may result in serious personal injury.
Wear safety equipment. Always wear eye protection. Wearing safety equipment such as dusk mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
Prevent unintentional starting. En-sure the switch is in the off‑position before connecting to power source and/or battery, picking up or carrying the machine. Carrying machines with your finger on the switch or plugging in machines that have the switch on invites accidents.
Remove any adjusting key or spanner before turning the machine on. A spanner or a key left attached to a rotating part of the machine may res-ult in personal injury.
Avoid abnormal body posture. Provide for a secure stance and keep your balance at all times; never run. This enables better control of the machine in unexpected situations.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. Always wear sturdy footwear and long trousers when operating the machine.
If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.
Do not assume a false sense of security and disregard the safety regulations for machines, even if familiar with the machine through multiple use. A careless action can cause severe injury within a fraction of a second.

Use and Handling of the Machine

Do not force the machine. Use the correct machine for your application. The correct machine will do the job better and safer at the rate for which it was designed.
Do not use the machine if the switch does not turn it on and off. Any machine that cannot be controlled with the switch is dangerous and must be repaired.
Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the machine before making any adjustments, changing accessories, or storing machines. Such preventive safety measures reduce the risk of starting the machine accidentally.
Store idle machines out of the reach of children. Do not allow persons unfamiliar with the ma-chine or these instructions to operate the machine. Trimmers are dangerous in the hands of untrained users.
Maintain trimmers with care. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the operation of the machine. Have damaged parts repaired before using the machine. Many accidents are caused by poorly maintained machines.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
Use the machine, accessories, application tools, etc. according to these instructions. Take the working conditions and the work to be performed into account. Use of ma-chines for operations different from those intended could result in a hazardous situation.
Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not allow for safe handling and control of the machine in unexpected situations.

Battery tool use and care
Remove the battery pack

whenever the machine is left by the user
before clearing a blockage
before checking, cleaning or working on the machine
after striking a foreign object to inspect the machine for damage
if the machine starts to vibrate abnormally, for immediately check
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
Use power tools only with specifically designated battery packs.Use of any other battery packs may create a risk of injury and fire.
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Do not use a battery pack or tool that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behaviour resulting in fire, explosion or risk of injury.
Do not expose a battery pack or tool to fire or excessive temperature. Exposure to fire or temperature above 130°C may cause explosion.
Follow all charging instructions and do not charge the battery pack or tool outside the temperature range specified in the instructions.Charging improperly or at temperatures outside the specified range may damage the battery and increase the risk of fire.

Service

Have your machine serviced by a qualified repair person using only identical replacement parts. This ensures that the safety of your ma-chine is maintained.
Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.

Safety Warnings for Garden Tool

Operation

u The operator must use the product in accordance with the regulations. The local conditions must be taken into account. When working, pay attention to other people, especially to children.
u Never allow children, persons with physical, sensory or mental limitations or a lack of experience and/or knowledge and/or people unfamiliar with these instructions to use the product. Local regulations may restrict the age of the operator.
Children should be supervised to ensure that they do not play with the product.

Application

When working with the machine, always hold it firmly with both hands and provide for a secure stance. The garden tool is guided more secure with both hands.
Always wait until the machine has come to a complete stop before placing it down.
Never operate the machine with a defective protection guard/cover or without safety device. Ensure that these are properly mounted. Never use the garden tool when incomplete or after unauthorised changes.
Never operate the machine if the cord is damaged or worn.
Never replace non-metallic cutting elements with metal cutting elements.
Never repair the garden tool yourself unless you are qualified to do so.
Other persons and animals should remain or be kept a suitable distance away when using the garden tool. The operator is responsible for third parties in the work area.
Wait until the cutting head has completely stopped before touching it. The cutting head continues to rotate after the trimmer is switched off; a rotating cutting head can cause in-jury.
Work only in daylight or in good artificial light.
Avoid operating the trimmer in bad weather conditions especially when there is a risk of lightning.
Operating the trimmer in wet grass decreases the efficiency of performance.
When transporting, switch the machine off and remove the battery.
Always ensure a safe working position when working with the trimmer. Always keep your hands and feet at a safe distance from rotating parts.
Keep the balance all the time while trimming to prevent falling over.
Take care when placing product on floor, as it may become a trip hazard.
Remove the battery before replacing the spool.
Inspect and maintain the trimmer regularly.
Always wear gloves when cleaning product or replacing cutting means.
Be careful of injuries from the blade used for cutting the cutting line. After feeding cutting line, always re-turn the trimmer to a horizontal working position before switching on.
Switch the machine off and remove the battery.
- whenever you leave the machine unattended for any period of time
- before replacing the cutting line– before cleaning or working on the trimmer
- before storing the trimmer
Store the product in a secure, dry place out of the reach of children. Do not place other objects on top of the product.
Do not use the garden tool as a walking stick.

Recommendations for Optimal Handling of the Battery Pack

Do not open the battery. There is a risk of short-circuiting.
Protect the battery against heat (e.g., against continuously intense sunlight), fire, water, and moisture. There is a risk of explosion.
In case of damage and improper use of the battery pack, vapours may be emitted. Ventilate the area and seek medical help in case of complaints. The vapours can irritate the respiratory system.
Only use the battery with products from the manufacturer. This is the only way in which you can protect the battery against dangerous overload.
The battery can be damaged by pointed objects such as nails or screwdrivers or by force applied externally. An internal short circuit can occur and the battery can burn, smoke, explode or overheat.
Do not short-circuit the battery. There is a risk of explosion.
Occasionally clean the venting slots of the battery using a soft, clean and dry brush.

Safety Warnings for Battery Chargers

Read all safety warnings and all instructions.
Failure to follow the safety warnings and instructions may result in electric shock, fire and/or serious injury.
Save all safety warnings and instructions for future reference.

Use the battery charger only when you fully understand and can perform all functions without limitation, or have received appropriate instructions.
Never allow children, persons with physical, sensory or mental limitations or a lack of experience and/or knowledge and/or people unfamiliar with these instructions to use the battery charger. Local regulations may restrict the age of the operator.
Supervise children at all times. This will ensure that children do not play with the battery charger.
Charge only Bosch lithium-ion batteries with a capacity above 1.5 Ah (with at least 5 rechargeable battery cells). The battery voltage must match the battery charging voltage of the charger. Do not charge non-re-chargeable batteries. Otherwise there is a danger of fire and explosion.
Keep the battery charger away from rain or moisture. Penetration of water in the battery charger increases the risk of an electric shock.
Keep the charger clean. Dirt poses a risk of electric shock.
Always check the charger, cable and plug before use. Stop using the charger if you discover any damage. Do not open the charger yourself, and have it repaired only by a qualified specialist using only original replacement parts. Dam-aged chargers, cables and plugs increase the risk of electric shock.
Do not operate the charger on an easily ignited surface (e.g. paper, textiles, etc.) or in a flammable environment. There is a risk of fire due to the charger heating up during operation.
Do not cover the ventilation slots of the battery charger. Otherwise, the battery charger can overheat and no longer operate properly.
For increased electrical safety, we recommend using a residual current device with a max. tripping current of 30 mA. Before using, always check your residual current device.

Symbols

The following symbols are important for reading and understanding the original instructions. Please take note of the symbols and their meaning. The correct interpretation of the symbols will help you to use the product in a better and safer manner.

Symbol

| Meaning

Movement direction

---|---
| Reaction direction
| Wear protective gloves
| Weight
| Switching on
| Switching off
| Permitted action
| Prohibited action
LICK!| Audible noise
| Accessories/Spare Parts

Intended Use

The garden tool is intended for domestic use, for trimming grass, weeds and nettles. It is designed for trimming grass growing on slopes, under obstacles and lawn edges that can not be reached by the lawn mower. The garden tool is not designed for use as a brush cutter. The garden tool is not intended for commercial or industrial use.

Deliver scope (see figure B)

BOSCH-18V-260-Easy-Grass-Cutter-
fig1

Carefully remove the machine from its packaging and check if the following parts are complete:

Grass Trimmer
Protection guard
Battery**
Charger**
Original instructions
When parts are missing or damaged, please contact your dealer.
** country specific

Product Features (see figure A)

BOSCH 18V-26 Easy Cordless grass
trimmer-fig01

The numbering of the product features refers to the illustration of the product on the graphics pages.

Adjustable handle
Lawn trimming/edge cutting button
Lock-off button for On/Off switch
On/Off switch
Battery unlocking button
Battery
Handle-adjustment release
Protection guard
Transport safety
Charger
Spool cover
Spool
Hole for line wind-up
Hole for line guiding
Line-feed button

a) Accessories shown or described are not included with the product as standard. You can find the complete selection of accessories in our accessories range.

Technical Data

Lawn Trimmer/Lawn Edge Trimmer

Article number

| | EasyGrassCut 18V-230

3 600 HC1 A..

| EasyGrassCut 18V-26
EasyGrassCut 18V-260 3 600 HC1 C..
---|---|---|---
Rated voltage A)| V| 18| 18
No-load speed A)| min-1| 8500| 8500
Cutting line diameter| mm| 1.6| 1.6
Cutting diameter| cm| 23| 26
Cutting spool capacity| m| 4.0| 4.0
Adjustable handle| | ●| ●
Edge cutting| | ●| ●
Weight according to EPTA‑Procedure 01:2014A)| | |
– without battery| kg| 1.9| 1.9
– with battery| kg| 2.2| 2.2
Serial number| | see type plate on the garden product
Recommended ambient temperature during charging| °C| 0 … +35| 0 … +35
Permitted ambient temperature during operation B) and storage| °C| -20 … +50| -20 … +50
Battery type| | PBA 18V…W-. 1.5 Ah, 2.0 Ah, 2.5 Ah, 4.0 Ah,

6.0 Ah

| PBA 18V…W-. 1.5 Ah, 2.0 Ah, 2.5 Ah, 4.0 Ah,

6.0 Ah

A) Depends on battery in use
B) Limited performance at temperatures < 0 °C

Charger

Article number

| EU| AL 1810 CV

2 607 226 385

| AL 1820 CV

2 607 225 4..

| AL 1830 CV

2 607 225 965

| AL 1880 CV

2 607 226 1..

---|---|---|---|---|---
| UK| 2 607 226 387| 2 607 225 4..| 2 607 225 967| 2 607 226 1..
Charging current
Charging period (battery discharged)| A| 1.0| 2.0| 3.0| 8.0
– Battery with 1.5 Ah| min| 94| 50| 33| 27
---|---|---|---|---|---
– Battery with 2.0 Ah| min| 124| 65| 45| 30
– Battery with 2.5 Ah| min| 154| 95| 60| 36
– Battery with 4.0 Ah| min| 244| 125| 95| 35
– Battery with 6.0 Ah| min| 364| 150| 130| 62
Weight according to EPTA‑Procedure 01:2014

Protection class

| kg| 0.17

/ II

| 0.48

/ II

| 0.40

/ II

| 0.60

/ II

Noise/Vibration Information

Noise emission values determined according to EN 62841-4-4.
Typically the A-weighted noise levels of the product are:

– Sound pressure level	dB(A)	72	74
– Uncertainty K	dB	= 2.5	= 2.5
– Sound power level	dB(A)	80	82
– Uncertainty K	dB	= 1.0	= 1.0

Vibration total values ah (triax vector sum) and uncertainty K determined according to EN 62841-4-4

– Vibration emission value ah	m/s2	< 2.5	< 2.5
– Uncertainty K	m/s2	= 1.5	= 1.5

Mounting and Operation

Action

Product features

| Figure

A

| Page

431

---|---|---
Delivery scope| B| 432
Removing the transport safety| C| 432
Connecting the shaft| D| 433
Adjusting the handle| E| 433
Mounting the protection guard| F| 434
Battery charging and inserting| G| 435
Switching On and Off| H| 435
Switching from lawn trimming/ edge cutting| I| 436
Removing the line spool| J| 437
Winding line on spool| K| 437
Mounting the line spool| L| 438
Line feeding| M| 438
Maintenance, Cleaning and Storage| N| 439
Accessories| O| 440

Assembly

Caution: Switch the garden tool off and pull the mains plug before performing any maintenance.

Connect shaft (see figures C and D)
Note: A connected shaft can no longer be dismounted. Remove the transport safety (9).
Connect the individual parts of the shaft until they can be heard to engage.

Mounting and adjusting the handle (see figure E)
The handle (1) can be set to different positions. To change the adjustment, press buttons (7) and move the handle to the desired position. Release the buttons (7) again so that the handle can engage.

Mounting the protection guard (see figure F)
Before mounting the protective guard, pull the plant-protection frame from the delivery position to the storage position.
Position the protection guard (8) on the trimmer head and fasten it with the provided screw.
Do not disassemble guard once connected.
Then, pull the plant-protection frame to the working position.

Switching on

Caution: Switch garden tool off and remove battery from machine before adjusting or cleaning.
The cutting line continues to rotate for a few seconds after the trimmer is switched off. Allow the motor/cutting line to stop rotating before switching on again.
Do not briefly switch off and on again several times in a row.
Only use Bosch approved cutting elements. Cutting performance will vary with different cutting elements.

Charging the Battery

The battery is equipped with temperature monitoring that allows charging only in the temperature range between 0 °C and 35 °C. In this manner, a high battery service life is achieved.
Note: The battery is supplied partially charged. To ensure full battery capacity, completely charge the battery in the battery charger before using for the first time.

The lithium-ion battery can be charged at any time without reducing its service life. Interrupting the charging procedure does not cause damage to the battery.
The “Electronic Cell Protection (ECP)” protects the lithium-ion battery against deep discharging. When the battery is empty, the product is switched off by means of a protective circuit: The product no longer operates.
Do not continue to press the On/Off switch after an automatic shut-off of the product. The battery could become damaged.
Observe the notes for disposal of the battery.

Inserting/Removing the Battery (see figure G)
Note: Using unsuitable batteries can lead to malfunctions or damage the machine.
Insert the charged battery (6). Ensure the battery is inserted correctly.
To remove the battery (6) from the machine, press the battery unlocking button (5) and pull the battery out.

Charging Procedure
The charging procedure starts as soon as the mains plug of the charger is plugged into a socket outlet and the battery (6) is inserted onto the charger (10).
Due to the intelligent charging method, the charging condition of the battery is automatically detected and the battery is charged with the optimum charging current, depending on battery temperature and voltage.
This gives longer life to the battery and always leaves it fully charged when kept in the charger for storage.

Meaning of the Indication Elements
(AL 1810 CV)
Flashing battery charge indicator

The charging process is indicated by the flashing of the battery charge indicator .

Solid light on battery charge indicator
A solid light on the battery charge indicator signals that the battery is fully charged or that the temperature of the battery is not within the permitted charging temperature range, and can therefore not be charged. The battery is charged as soon as the allowable charging temperature range is reached.
When the battery is not inserted, a solid light on the battery charge indicator signals that the mains plug is inserted in the plug socket and that the charger is ready for operation.

Meaning of the Indication Elements
(AL 1830 CV)

(Fast) Flashing of the Green Battery Charge Indicator
The rapid-charging procedure is indicated by fast flashing of the green battery charge in-
Note: The rapid-charging procedure is only possible when the battery temperature is within the allowable charging temperature range, see section “Technical Data”.
(Slow) Flashing of the Green Battery Charge Indicator
When the charging condition of the battery is 80%, the green battery charge indicator flashes slowly.
The battery can be removed for immediate use.
Continuous Lighting of the Green Battery Charge Indicator
Continuous lighting of the green battery charge indicator indicates that the battery is fully charged.
When the battery is not inserted, continuous lighting of the battery charge indicator indicates that the mains plug is inserted in the socket outlet and that the battery charger is ready for operation.
Continuous Lighting of the Red Battery Charge Indicator
Continuous lighting of the red battery charge
indicator indicates that the temperature of the
battery is not within the allowable charging temperature range, see section “Technical Data”. As soon as the allowable charging temperature range is reached, the battery charger automatically switches to rapid charging.
Flashing Red Battery Charge Indicator
A flashing red battery charge indicator indicates a different malfunction of the charging procedure, see section “Troubleshooting – Causes and Corrective Measures”.

Operation

Switching On and Off (see figure H)
To switch on, firstly press the lock-off button (3). Then press the On/Off switch (4) and keep it pressed.
To switch off, release the On/Off switch (4).

Lawn Trimming/Edge Cutting (see figure I)
Turn the handle against the shaft by 180° to position the trimmer head either for lawn trimming or edge cutting. Release button (2) so that the turning mechanism engages. Now, turn the complete machine to the working position.
Lawn trimming
Move the trimmer left and right, keeping it well away from the body. Cut higher grass in steps.
Edge cutting
Guide the trimmer along the edge of the lawn. Avoid contact with solid surfaces or walls to prevent rapid wear of the cutting line.
Cutting around trees and bushes
Carefully cut around trees and bushes so that they do not come into contact with the cutting line. Plants can die if you damage the bark.

Dismounting the spool, winding up the cutting line and mounting the spool (see figures J to L

Remove the battery before replacing the spool.

Press both latches of the spool cover together and remove the spool cover (11). Afterwards, remove the empty spool (12).
Cut off approx. 4.0 m line from the refill roll. Slide one end of the cutting line into the hole for line wind-up (13) in the spool and wind up the cutting line uniformly and tightly. Slide the other end of the cutting line through the hole for line guiding (14) in the trimmer head and mount the spool back into the trimmer head. Affix the spool by mounting the spool cover (11).
Line Feeding (see figure M)

Semi-automatic Line Feeding
The trimmer is equipped with a semi-automatic feeding system. The system feeds 10 mm of the line with every press of the on/off switch (4).
Manual Line Feeding
Press the line-feed button (15), and pull the cutting line out to the desired length.

Troubleshooting

Lawn Trimmer/Lawn Edge Trimmer

Motor refuses to start	Battery discharged	Recharge battery
Battery too hot/cold	Allow to cool/warm
Garden tool functions	On/Off switch defective	Contact Bosch customer service

agent
intermittently| Internal wiring of garden tool defective| Contact Bosch customer service agent
Garden product labours| Grass too high| Cut in stages
Garden tool does not| Cutting line too short/broken off| Manually feed cutting line
cut| Spool empty| Replace line spool
Cutting line can no| Line inside the spool entangled| Inspect the spool, rewind if necessary
longer be fed| Spool empty| Refill line spool
Cutting line retracts into spool| Cutting line too short/broken off| Remove spool – rethread line (see figures J − L )
Cutting line breaks fre-| Line inside the spool entangled| Remove spool – rewind line (see figures J − L )
quently| Trimmer used incorrectly| Only trim with the tip of the line, avoid stones, walls and other hard objects. Feed the line regularly to maintain full cutting diameter.
Heavy vibrations| Cutting line broken Cutting system damaged

Grass between spool housing and line-feed button

Grass in hole for line feed

| Pull out cutting line with manual feed (see figure

M )

Contact Bosch customer service agent Disassemble spool cover and remove grass Remove grass from hole for line feed

Battery and charger

Problem

Flashing red battery

| Possible Cause

Battery not (properly) inserted

|

Corrective

ActionProperly insert battery in charger

---|---|---
charge indicator

No charging procedure possible

| Battery contacts contaminated| Clean the battery contacts (e. g. by inserting and removing the battery several times) or replace the battery
Battery defective| Replace the battery
Battery charge indicat- ors do not light up| Mains plug of battery charger not plugged in (properly)| Insert mains plug (fully) into the socket outlet
---|---|---
Socket outlet, mains cable or battery charger de- fective| Check the mains voltage; have the battery charger checked by an authorised after-sales service agent for Bosch power tools

After-Sales Service and Application Service

Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts. You can find explosion drawings and information on spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you with any questions about our products and their accessories.
In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange the collection of a product in need of servicing or repair. Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses

Transport

The contained lithium-ion batteries are subject to the Dangerous Goods Legislation requirements. The batteries are suitable for road transport by the user without further restrictions.
When shipping by third parties (e.g.: by air transport or for-warding agency), special requirements on packaging and la-belling must be observed. For preparation of the item being shipped, consulting an expert for hazardous material is required.
Dispatch battery packs only when the housing is undamaged. Tape or mask off open contacts and pack up the battery in such a manner that it cannot move around in the packaging. Please also observe the possibility of more detailed national regulations.

Disposal

The product, batteries, accessories and packaging should be sorted for environmental-friendly recycling.
Do not dispose of the product and batteries/rechargeable batteries into household waste!

Only for EU countries:
According to the European Guideline 2012/19/EU, products that are no longer usable, and according to the European Guideline 2006/66/EC, defective or used battery packs/batteries, must be collected separately and disposed of in an environmentally correct manner.

Only for United Kingdom
According to Waste Electrical and Electronic Equipment Regulations 2013 (2013/3113) and the Waste Batteries and Accumulators Regulations 2009 (2009/890), power tools that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.

Battery packs/batteries:
Li-ion:
Please observe the notes in the section on transport (see “Transport”, page 28).