ShenZhen MFA0204 Smart Light Switch User Guide
- June 5, 2024
- Shenzhen
Table of Contents
Smart Switch User Guide
MFA02/MFA04
Precautions before product installation:
- WiFi only supports 2.4GHz network (802.11 b/g/n). 5G network is not available.
- Need a neutral wire. (Please do not install if there is no neutral wire in the cassette).
- Basic electrical wiring knowledge or experience is required, or please consult a professional electrician.
- Never connect the neutral wire and the live wire reversely (Otherwise the electrical appliances will not work).
- Long press the ON / OFF button to restore the device to the factory default settings.Do this only when you are sure you want to delete all settings. (This operation will change the status of network distribution).
- A screwdriver , a test pencil and other tools are needed.
Smart Home
Specifications
Type | Smart Wi-Fi 3-Way Switch |
---|---|
Model | MFA02/MF04 |
Power supply mode | Neutral+Live Wire |
Input | AC110-125V~50/60Hz |
Output | 400W Max. for INC Bulb 150W Max. for CFL&LED Bulb |
Wireless Frequency | 2.4GHZ |
Wireless Standard | IEEE802.11 b/g/n |
Indicator light meaning
Indicator | Status | Discription |
---|---|---|
Blue | Flash Rapidly | Ready for connection |
(Default Mode Only)
Blue| Flash Slowly
(1 time every 3 S)| Ready for connection
(AP Mode Only)
Blue light is
always on| Off| Turn the light off
Green light is
always on| On| Turn the light on
Blue
_| Flash Slowly| No Internet
Safety Notice:
- Cut off the power before installation
- Please use it only when it’s installed with RCD or current leakage protector at home
- A neutral wire is needed to power the switch.
Product installation guide:
- Connect the mobile phone to the indoor WiFi and download the APP “Smart Life” that controls the switch (please scan the QR code below to download).
https://smartapp.tuya.com/smartlife
Find out the “Smart Life” app in the Apple app store, Google Play, or scan the
QR code below and install it.The free app “Smart Life” is compatible with
mobile devices that support IOS8.0 above, and Android 4.4 above.
Enter the register interface, input the email address/phone number for getting
the verification code to register an account. Please just login if you already
have a Smart Life account.
2. Open the old switch and carefully pull it out of the wall, first use a
test pen to distinguish the live wire and the load wires, meanwhile mark them
with labels, and then find the main switch of the lamp in the circuit breaker
to turn it off. (After turning off the main power switch, please use a test
pencil to reconfirm whether the power has been cut off).
3. After turning off the power, find the white wire and other wires that need to be installed in the cassette and mark them. Remove the old switch after marking. (If you cannot find the white wire, you cannot do the installation by yourself. In this case, you must consult a professional electrician).
| PS: Please remove the old switch after finding the four wires, otherwise
please
install the wires back to their original position or consult a professional
electrician.
---|---
Usually: White represents the neutral line. Black represents the fire line.
The green or a single bare copper wire represents the ground wire. The above
content is for reference only and cannot be used as a standard.
Usually:
White or Gray represents the neutral wire
Black or Red represents the live wire
Green or yellow or a single bare copper representing the ground wire
** White or Gray represents the neutral wire Black or Red represents the
hot wire Green or yellow or a single bare copper wire representing the ground
wire Two 3-way switches can be replaced with each other
Switch Can Replace 3 Way or Single Pole Switch**
Installation Tips: 1.The Most important to mark the Common & Traveler wires before you remove any from the old switch 2.There is no standard for wire colors, the wire colors for travelers & common could be any color
Network distribution instructions:
This product has two network connection modes: EZ mode and AP mode. Note: Each
mode only lasts for three minutes in the state of “to be connected”. If the
connection
cannot be completed within three minutes, you need to press and hold the
setting again to do the connection one more time (switching method between the
two modes: press and hold the switch key for 5-10 seconds until the indicator
light is on). EZ mode: After long press, the switch indicator flashes once
every 0.3 seconds, it shows that the switch is in the state of EZ mode, in
this state, it supports APP “Auto Scan” mode and WiFi quick connection mode
in“Add Manually”block. (Supports simultaneous connection of multiple
switches). AP mode: After long press, the switch indicator light flashes once
per second, it shows that the switch is in the state of AP mode, in this state
only the hotspot distribution network mode (compatible mode) in the APP “Add
Manually”is supported. (Only supports one switch connection).
EZ mode network configuration method ①: Open the Smart Life APP→My Home interface→click the plus icon in the upper right corner→choose ”Auto Scan”→ set WiFi password→confirm that the switch is in EZ mode→Start scanning→next step.
EZ mode network configuration method ②: Open the smart life APP→My Home interface→click the plus icon in the upper right corner→Add manually→select the electrical switch (WiFi)→set WiFi password→Next→confirm that the switch is in the EZ mode→search device →Done
AP mode network configuration method: open the Smart Life APP→My Home interface→click the plus icon in the upper right corner→manually add→select the electrical switch (WiFi)→set the WiFi password→click the option on the upper right corner→select AP Mode → confirm that the switch is in AP Mode→Next→Go to connect→automatically switch to the wireless LAN interface of the mobile phone and select the wireless LAN signal named SmartLife-XXXX→back to the smart life APP interface to automatically complete the network configuration→Done.
Precautions:
- Do not modify or disassemble the product by yourself.
- Do not hit the equipment with sharp objects.
- The product is a household device, do not install it on an industrial environment.
- Do not install the switch in a metal house or a place that may shield the wireless signal.
- The live wire and neutral wire of the switch must be connected via the same leakage protector, otherwise, it is easy to cause tripping and other phenomena.
- After installation, please fix the panel firmly before powering on the switch. Live operation is strictly prohibited.
- The mobile phone control is related to the strength of the WiFi signal connected to the switch. It is recommended to use a router with a strong signal.
- There is an upper limit on the number of smart products controlled by ordinary routers. If it is overloaded, it will automatically squeeze out smart products with relatively weak signals. (Generally, the upper limit is 10-12, including computer phones, etc).
- If you do not install and use it for a long time, please store it in a dry environment at -10C°-40C°,and keep it out of the reach of children.
- Provide a one-year warranty.
For the connection method of Alexa, Google Assistant: Open the interface of “Me” in the smart life APP→”More Services”→”Alexa” or other devices→see more connection methods→tutorial. There is a detailed explanation about this in the tutorial.
For more smart life APP applications, such as: “multi-control association” (up
to four switches can be controlled at the same time); “create group” (control
all the switches in all groups at the same time); “sharing device” (share
switch control with all family members), and other functions. For more
functions, please contact us. We will provide you with more functional
descriptions about the APP.
FCC NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference,
(2) this device must accept any interference received, including interference
that may cause undesired operation. The manufacturer is not responsible for
any radio or tv interference caused by unauthorized modifications or change to
this equipment. Such modifications or changes could void the user’s authority
to operate the equipment. This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
To maintain compliance with FCC’s RF exposure guidelines, this equipment
should be installed and operated with a minimum distance of 20cm between the
radiator and your body.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>