HAYLOU GT1 XR TWS Earbuds User Manual
- June 5, 2024
- Haylou
Table of Contents
HAYLOU GT1 XR TWS Earbuds
Overview
What’s in the Box
Eartips X 3 pairs(medium eartips have been assembled), earbuds, charging case, USB cable, user manual
How to wear
When calling, adjust Mic towards mouth to gain better talking experience.
How to Charge
Prior to using,please peel off sticker covering the pogo pins and top up both earbuds and charging case.
Power-on
Open lid to power on earbuds. If earbuds are out of case, keep touching both
panels for 2s to power on(LED glows solid white)
Power-off
Close lid to power off earbuds. Keep touching panels for 4s to power off ( LED
glows solid red for 2s).
Ignore Call
Keep touching panel for ls to ignore call.
Stereo Mode
Auto connection: take up both earbuds from the case. On cellphone, search for Haylou-GTl XR R/Land tap to connect. Notice will show up on cellphone in 2s, tap to connect the other earbud. If earbuds fail to connect to cellphone, please put earbuds back to the case and repeatthe above steps. Earbuds will auto reconnect to the last device in connectivity records, if any. (Bluetooth faculty has to be activated.)
Note: earphones have been setted to factory when shipping out.
Manual pairing: manually power on two earbuds. On cellphone,search for Haylou- GTl XR R/L when earbud blinks white promptly. Tap to connect
Mono Mode
Auto pairing: take out one earbud from the case to power on it. Its LED will soon blink white promptly then search for Haylou-GTl XR R/L on cellphone and tap to connect Once powering on, earbud will auto reconnect to last device in connectivity records, if any (Bluetooth faculty has to be activated). Manual pairing : manually poweronone earbud. Its LED will soon blink white flash then search for it on cellphone and tap to connect.
Basic Parameters
- Operation range: lOm(with no obstacle)
- Battery capacity: 43mAh(single earbud)
- Charging time: approx. l.5hr
- Calling time: approx. 4hr
- Standby time: approx.130hr
- Input parameter: 5V =lOOmA
- Battery type: Ii-ion
- Bluetooth version: 5.0
Charging Case
- Input parameter:5V =500mA
- Output parameter:SV=lSOmA
- Charging time: approx. 3hr
- Standby time: approx. 4 months
- Battery ca pa city: 800mAh
- Battery type: Ii-ion
All technical data are subject to practical performance
Functions
Switch Between Mono Mode and Stereo Mode
Pick up two earbuds to auto enter stereo mode and push one back to enter mono
mode. Or you can pick it up again to resume stereo mode
Quick Connection on Phone
Turn on Bluetooth faculty on your phone. Open the charging case’s lid, tap pop-up window on phone to connect the earbuds.
Note: for Quick Connection on Phone, please update your phone’s system to the latest version. Only part of phones supports this function.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>