innowi CB-UWA6N4C-47 Wi-Fi 2.4G Mobile Workforce Solution User Guide
- June 5, 2024
- innowi
Table of Contents
CB-UWA6N4C-47 Wi-Fi 2.4G Mobile Workforce Solution
User Guide
Wi-Fi 2.4G/5G, BT 4.0/5.0
Smart. Secure. Sophisticated. Simplified.
Setup
Quick Start Operations Guide
a) First connect the power adapter cable to the bridge USB-C connector and
plug it into the socket
b) Turn on the device by pressing the power button for a few seconds. You will
see the “Innowi” display screen turns on and the device begins to power up
c) For queries related to devising applications please visit the Innowi
website www.innowi.com
badge Features
Recommended Usage
badge device is recommended to be held in the dominant hand and used with a
single hand for standard operations.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Specific Absorption Rate (SAR) information:
This CB_UWA6N4C_47 meets the government’s requirements for exposure to radio
waves. The guidelines are based on standards that were developed by
independent scientific organizations through periodic and thorough evaluations
of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons regardless of age or health.
FCC RF Exposure Information and Statement
The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue.
Device types: CB_UWA6N4C_47 (FCC ID: 2AO2YIWCHTB101.) have also been tested
against this SAR limit. The highest SAR value reported under this standard
during product certification when properly worn on the body is 1.241W/kg.
Battery Service and Recycling
All rechargeable batteries have a limited lifespan and may eventually need to
be serviced or recycled. If the device needs to be disposed of for any reason,
the device should be returned to Innowi or its authorized dealer for proper
decommissioning.
Support
For any questions and comments, please contact your provider or Innowi at
support@innowi.com.
www.innowi.com
© 2020 Innowi, Inc.
Documents / Resources
|
innowi CB-UWA6N4C-47 Wi-Fi 2.4G Mobile Workforce
Solution
[pdf] User Guide
IWCHTB101, 2AO2Y-IWCHTB101, 2AO2YIWCHTB101, CB-UWA6N4C-47 Wi-Fi 2.4G Mobile
Workforce Solution, CB-UWA6N4C-47, Wi-Fi 2.4G Mobile Workforce Solution
---|---
References
- Innowi - One Stop Solution for all your Restaurant Management
- Innowi - One Stop Solution for all your Restaurant Management