Audiofly Pty AFT2 Wireless Bluetooth Headphones User Manual

Wireless Bluetooth Headphones
AFT2
User Guide & Warranty Information
User Manual

In the box you get

(Fig. 1):

1. AFT2 Earpiece
   a. Touch interface
   b. Microphone
   c. Indicator lights
   d. Ear tips
   e. Charging pins

2. Charging case
   a. Button
   b. Battery level indicator
   c. USB Type-C charging port

3. USB-C Charging cable
   4. 2 sets of silicone tips: (1xS, 1xM)

SYNCING & PAIRING

(Fig. 2)

To pair for the first time:

1. Remove both earpieces from the charging case and place them in the ears. The earpieces will automatically turn ON’. You will hear a voice confirmation for “power on” and then “pairing” indicating the earpieces are now in pairing mode.
2. To pair with your device, navigate to the Bluetooth settings on your device and select either AFT2-R or AFT2-L.
3. You will then hear the voice confirmation, “Device connected” indicating the device has been successfully paired. Each time the headphones are turned on they should now remember this device automatically.

Note: Your environment can affect the quality of your connection. To ensure an optimal listening experience we recommend maintaining a direct line between the AFT2 earpieces and your device.
¹ Flashing blue light indicates the headphones are looking for a Bluetooth device.

CHANGING THE MASTER CONTROL EARPIECE

The master earpiece controls the main functions of the AFT2 headphones such as the microphone and certain interface operations. Voice confirmations will also be prompted from the master earpiece. When you first receive your AFT2 the master earpiece will be the right side by default. Either earpiece can serve as the master, and if you want to change sides follow these steps:

1. Start with both earpieces docked in the charging case.
2. The earpiece [left or right) that is removed from the case first will automatically become the master earpiece.
3. To switch master earpiece sides while active, simply place the earpiece that is the master back in the case. The active earpiece will automatically re-sync and become the master control.

TURNING ON/OFF

(Fig. 4)

To turn ON, tap and hold the interface on each earpiece for 2 seconds until lights flash RED and BLUE. To turn OFF tap and hold the interface on each earpiece until the lights flash RED.
Alternatively, the earpieces will automatically turn OFF when docked in the charging case and turn ON when removed from the charging case.
The earpieces will automatically turn off in 5 minutes if not connected to a device.

HOW TO WEAR

(Fig. 5)

Note: Hold the AFT2 earpiece by the sides. Any pressure on the touch interface area will activate earpiece functions.

1. Place ear tip in ear and rotate backward
2. Push the bottom of the earpiece into the ear until a good seal is achieved. Change ear tip size if needed.
3. Rotate the earpiece forwards and backward until they sit comfortably.

USING ONE EARPIECE

(Fig. 6)

After the headset is successfully connected to the Bluetooth device for the first time, if you need to use a single headset, take the headset directly from the charging case and connect the headset to the Bluetooth device.

CONTROLS

| L| R
---|---|---
Play | Tap x 1| Tap x 1
Previous song | Double-tap|
Next song | | Double-tap
Answer call | Single tap any earpiece
End call | Double-tap any earpiece
Reject call | Tap and hold any earpiece
Increase the volume (while talking or listening to music) | | Tap and hold
Reduce the volume (while talking or listening to music) | Tap and hold|
Voice assistant| Tap and hold on to any earpiece, there will be a tone.
Tap any headset to exit the voice assistant.
*Voice assistant can only be activated when music is paused or not playing.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>