aiwa AT-X80J True Wireless Earbuds User Manual

AT-X80J
True Wireless Earphones

Safety Instructions

1. Avoid dropping.
2. Avoid falling into the water
3. Do not submerge in water.
4. Avoid extreme temperatures.
5. Do not use the device outdoors during a thunderstorm.
6. Use original or certified cables.
7. Do not use any corrosive cleaner/oil to clean.

Hearing Safety

1. **** To avoid hearing damage, do not listen for extended periods at high volume.
2. Do not turn the volume so high that you’re unable to hear your surroundings.
3. You should always exercise caution and do not use earbuds in a potentially hazardous situation.

Unboxing

Product/Accessories Checklist:

1. 1X Pair of TWS Earphones
2. lx Type-C Charging Cable
3. 2X Pairs of Silicone Ear Tips
4. 1X User Manual

Using Your Headset

Power On

1. Auto power on- Take out both earphones from the charging case.
2. Long press touch sensor (Side surface of the earphone) for approx. 1.5 seconds. Blue Light flashing indicates power on

Power Off

1. Auto power off— Place earphones back into charging case.
2. Long press touch sensor for approx. 3 seconds. Red light flashing indicates power off sequence Earphones will shut down automatically after 3 minutes when disconnected.
   2. Charging your earphones

** Use the included USB cable to charge your headset. Make sure they are fully charged before first use. To preserve battery lifespan, fully charge at least once every 4-5 days.
4. Pairing your device
**

1. Long press the touch sensor to enter pairing mode (Approx. 3 Seconds). Alternating Red and Blue light flashing indicate earphones is in pairing mode

2. Turn on Bluetooth on your device.

3. Find and connect to “AT-X801” . (Prompt sound)

**** When turned on, Headset will automatically connect to the last connected device if available. If not Headset will enter pairing mode.

5. Music

Play/Pause
Short press touch sensor once
Play/Pause
Short press touch sensor once Previous song
Double click the “L” earphone touch key when music is on Next Song
Double click the “R” earphone touch key when music is on Volume —
Triple click the “L”earphone touch key when music is on Volume +
Triple-click the “R”earphone touch key when music is on|
---|---

※In order to get the best audio experience and comfort, please choose the most suitable ear tips.
**** An incoming call automatically pauses your music playback. Music playback resumes after the call is ended/ignored.

6. Call Control

Answer Call
Short press touch sensor once
Reject Call
Long press touch sensor (approx. 2 seconds)
End Call
Short press touch sensor once|
---|---
Flashing blue| In a call
---|---
Incoming call

Enable Siri: Long press touch sensor on either earbud for approx. 1.5 seconds.

Specifications

**** Specifications are subjected to change without prior notice.

Warning: Rechargeable batteries must be disposed of properly. Please contact your local disposal/ recycling center for proper disposal. Do not expose the batteries to fire.

Warm reminder for using

Bluetooth earphones

1. Please check the power of the headset and charging box for the first use.

2. Make sure that the Bluetooth function of the Bluetooth playback device is turned on.

3. It is recommended to put the headset into the charging box to tiny charge it

4. a. When using the headset for the first time, take the headset out of the package separately if it is not put in the charging box Inside, you need to press and hold the power button at the same time to tan on the pairing mode, and the two headphones will enter the pairing state. The red and blue lights flash alternately.
   b. When using the headset for the first time, put the headset into the charging box at the same time, and the charging box will Take it out, the two headphones enter the pairing state, and the red and blue lights flash alternately.

5. When the left and right pairing of the headset is completed, the headset will prompt and the indicator light will be on. Then tun to breathing light signal

6. When the Bluetooth headset is connected to the playback device, the headset only displays to show that a single headset is connected, please repeat step 4.

7. Due to compatibility issues with Bluetooth playback devices and playback software, it is not a headset operation we effective on all devices.

8. Please use genuine playback software and genuine audio source

※In some areas, use of the BT wireless technology may be subject to some constraints. Please consult your local authority or service provider for details.

Troubleshooting

I can’t find 11T-X80J” on my Blue tooth’s device’s list.
Make sure “AT-X8OJ” and your device are within Bluetooth working distance (10m). Remove the earphones from the charging case, and enter pairing mode manually. Re-attempt to pair again.
My earbuds can only answer calls/ only listen to songs.
Re-start the earbuds. (Power down then power up) Turn off the mobile device’s Bluetooth and turn it back on. Delete all pairing data within the mobile devices. Re-attempt to pair again.
There is no sound coming from my earbuds.
Please check the volume level on both earbuds and connected mobile devices. Make sure “AT-X80J” and your device are within Bluetooth working distance (10m). Re-attempt to pair again.
Unstable connection
Make sure “AT-X80J” and your device are within Bluetooth working distance (10m).

Maintenance

Please read the following suggestions to help you comply with the warranty and extend the life of the product.

• Keep the product dry and do not place it in a damp place, so as not to affect the internal circuit of the product It is necessary to avoid using this product during intense exercise or sweating to prevent sweat from penetrating into the product and damaging the product.
• Do not place the product in a place exposed to the sun or high temperatures. High temperatures can shorten the life of electronic components, damage batteries, and deform some plastic parts.
• Do not place the product in a cold place to avoid damaging the internal circuit board.
• Do not attempt to disassemble the product. If you are not a professional, you may damage the product.
• Do not drop, strongly vibrate, or hit the product with hardware to avoid damaging internal circuits.
• Do not use harsh chemicals or detergents to clean the headphones.
• Do not use sharp objects on the surface of the product to avoid damage to the outer casing and affecting the appearance. If the product does not work properly, please send it to your qualified service facility and the staff will be happy to help you solve the problem.

WARRANTY
This product is covered under warranty for a period of one year from the date of sale limited to normal use and maintenance of the machine parts, materials, and functions. Problems and failures verified upon further identification will be provided with free repair and replacement parts.

This warranty does not apply:
(a) to a product that is out of warranty;
(b) to damage caused by operating the product outside the permitted or intended usage described.
(c) to a product that has been disassembled, repaired, or refitted by any third- parties.
(d) if a warranty card and proof of purchase cannot be presented;
(e) to damage caused by an earthquake, fire, or other external causes, natural disasters, etc.
Note: The warranty does not include product transport costs and does not provide on-site maintenance services
** AI WA reserves all rights to clarify this warranty interpretation
WARRANTY FEEDBACK FORM(TICK OFF)**

A. No sound
B. Faulty sound
C. Button malfunction
D. Faulty Pairing
E. Recharging problem
F. Others

Buying time|
---|---
Dealers of sale|
Time of problems|
User’s contact info|

FCC Requirement
This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

AIWA Co., Ltd.(Tokyo Japan)
General Agent in China:
Shenzhen Haohua Digital Technology Co., Ltd.
Address:
2101-09(2), Building A, Bantian International Center,
No. 5, Huancheng South Road, Ma’antang Community,
Bantian Street, Longgang District, Shenzhen
Service hotline: 4008838237
Executive standard: GB 8898-2011
Made in China
Aiwa Electronics lnt’I Co., Ltd.
Explore more at www.int-aiwa.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>