Shenzhen P92AOM3 Smart bracelet User Manual

Shenzhen P92AOM3 Smart bracelet

Welcome to use our high-performance wristband smart bracelet which creates a thoughtful and healthy experience for you.

Device maintenance
Please remember the following tips when you maintain your smart bracelet:

• Clean the smart bracelet regularly, especially its inner side, and keep it dry.
• Adjust the smart bracelet tightness to ensure air circulation.
• Excessive skincare products should not be used for the wrist wearing the smart bracelet.
• Please cease wearing the smart bracelet in case of skin allergy or any discomfort.
• Schematic diagram of the main body of the smart bracelet

Power-on
Long press the side button for 3 seconds or plug in the charging clamp to charge the smart bracelet.
Downloading and binding of smart bracelet APP

1. Download and install APP

2. Scan QR code with mobile phone to download APP

3. For the 1OS system, select APP storesearch Da Fit.
   Android system, select Google Play to download and install Da Fit.Or scan QR code to download
   Note: your mobile phone must support Android 5.1 or IOS 8.0 or above, and Bluetooth 4.0 or above.

4. Bind smart bracelet with APP Click on “Add Device” to bind the smart bracelet.

5. click on your device in the device list scanned.

6. The 10S system will show a Bluetooth pairing request and you can click on Bluetooth Pairing” to confirm. Connect it directly to the Android system.
   Successfully bound.

Introduction of smart bracelet functions

Power-on status
switch the menu interfaces of main screen, as the interfaces shown in the following;

Remove Device

For the Android mobile phone, the device can be disconnected from your mobile phone by simply clicking on Remove device.
For Apple mobile phone after binding removal, you need to click on the symbol on the right in Setting- Bluetooth, and choose to ignore the device. As shown below:

Frequently Asked Questions (FAQs)

1. Why does the smart bracelet automatically disconnect
   Bluetooth when the Android screen goes out?

2.  Lock background APP. When the Da Fit proces is cleared, the smart bracelet will be disconnected from the mobile phone.

3. Set APP self-startup

4. Unrestricted background operation. The Android mobile phone installed with APP intelligently restricts the background operation by default, and App should be set
   manually without any restriction.

5. Why cannot the smart bracelet receive message push?

6.  Please confirm that you have turned on the switch for message push at the mobile phone client.

7. Please confirm that messages can be displayed normally in the mobile phone notification bar. The message push on the smart bracelet is completed by
   reading the message from the mobile phone notification bar. The smart bracelet will not receive the message push if there is no message in the mobile phone notification bar.(You need to find notification settings in the mobile phone settings, and turn on the notification switch of WeChat, Q0 call, SMS and mobile phone client).

8. Turn on the mobile phone — Settings. Enter Notification useright” on the top search box, re-open Da Fit.

9. Why can’t take a hot bath with the smart bracelet?
   Answer: the bath water has a relatively high temperature, and generates a lot of vapor which is in the gas phase with small molecular radius and can easily infiltrate into
   the smart bracelet from the shell gap. When the temperature drops down, the vapor will condensate into liquid-phase droplets which will easily cause the short
   circuit inside the smart bracelet and damage the circuit board and then damage the smart bracelet.
   Note: for more FAQs, please refer to Da Fit APP feedback.

Warning:
Please consult your doctor before you take a new sport The smart bracelet should not be used for any medical purpose though it may dynamically monitor the heart rate at real-time.

(FCC) Statement

Federal Communications Commission (FCC) Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
  Warning: Changes or modifications made to this device not expressly approved by Shenzhen Yawell Intelligent Technology Co., Ltd may void the FCC authorization to operate this device.
  Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>