Shenzhen IL-KY-0502C1 String lights User Manual

: June 5, 2024
: Shenzhen

Table of Contents

SPECIFICATION
Handle panel
Key Function
FCC Warning
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shenzhen IL-KY-0502C1 String lights User Manual

SPECIFICATION

MODEL	IL-DM-KY-0502C1 Remote controller
INPUT	VOLTAGE RANGE

ENVIRONMENT

Handle panel

Key Function

ON: the main function is turn on the string lights.
OFF: the main function is turn off the string lights.
: Static colors increase brightness.
: Static colors decrease brightness.
+ : Color change speed up.
– : Color change speed down.
R: Static Red G: Static Green B: Static Blue W: Static Warm white
Y: Static Yellow C: Static Cyan O: Static Orange P: Static Purple
Mutile: All bulbs on with different static colors.
Random: All bulbs on with random changing colors.
Strobe: Part of bulbs random blink, background of rest bulbs keep static color,press the button to switch 8 color modes.
Twinkle: Part of bulbs random blink, rest bulbs off,press the button to switch 8 color modes.
Fade: All bulbs on with different colors brightness down in slowly automatically.
Breath: All bulbs on and shine from strong to weak,press the button to switch 8 color modes and a automatically changing colors mode
Flash: All bulbs on and flash,press the button to switch 8 color modes and a automatically changing colors mode.
Auto: All bulbs on and switch 8 colors modes automatically.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help

Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.