impulz BTK1 Universal Bluetooth KB for Tablet User Guide
- June 5, 2024
- impulz
Table of Contents
Universal Bluetooth KB for Tablet
Model: BTK1
QUICK GUIDE
Features
Thank you for choosing this Bluetooth Wireless Keyboard. It supports Bluetooth wireless connection and a scissor key structure, which will bring you a perfect input experience. It has a built-in rechargeable polymeric lithium battery and charging indicator. The keyboard will enter into sleeping mode if there is no action for 10 minutes, therefore it has a low energy consumption and long battery life.
Pairing Instructions
Before using this keyboard, it must be connected to your tablet or to any other device. When it successfully pairs, you do not need to re-connect it in the future. Please refer to the following instructions to connect the keyboard to your tablet.
- Turn on the keyboard.
- Press the “Connect” button for 3 seconds, and the blue light blinks.
- Open Bluetooth settings on your tablet and find the Bluetooth Keyboard, then click and connect (Password free connection).
Main Keys
- For Windows device, press Fn+W(Win) to switch to Windows mode.
Fn+ function keys, Press Fn, and the blue keys os below
Other main keys:
- Control+Commond+0 will open the soft keyboard.
- For Android or IOS devices, press Fn+Q(Android)/E(10S) to switch to Android/10S mode.
Press the blue function keys as below.
Fn+Enter will switch languages. This function is available for Android/10S devices.
Indicator
Power LED: When the keyboard powers on, it flashes for 1-2 seconds, and then
it turns off automatically.
Charging LED: It flashes while charging and turns off once the battery is
fully charged.
BT LED: It flashes when the keyboard is connecting and it turns off once it is
connected.
CAPS LED: It flashes when switching to upper case letters.
Charging Instructions
- It is important to charge it for at least 6 hours when using the keyboard for the first time. Next time when the battery is low, please charge it at least for 2 hours.
- When the red indicator flashes, it means it has a low battery and it should be charged again. When it is charging, the red indicator flashes all the time.
- Please correctly connect the charging cable to the keyboard as shown below.
Troubleshooting
If your keyboard doesn’t work properly
- Please make sure that the Bluetooth function in your tablet or any other device is enabled.
- The keyboard should be within 10 meters of the device.
- If the Keyboard’s built-in battery power is too low, please charge the keyboard.
- If the keyboard does not connect or pair with your tablet or any other device, please proceed to the following steps: First, delete or forget all Bluetooth devices on your tablet. Second, close the Bluetooth option on the tablet. Finally, restart the Bluetooth option in the tablet and connect again with the Bluetooth keyboard.
Specifications
- Frequency 2.4 GHz
- Voltage: 3.7V DC
- Working Current: <5mA
- Standby current: 1.0rnA
- Sleeping current <0.25mA
- Distance Range: 10 meters
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>