Shenzhen S10 CKYRIN KIRINX 4G smartwatch phone User Manual

Shenzhen S10 CKYRIN KIRINX 4G smartwatch phone

Open the box

Please check that you have the following items

1. Ckyrin Smart Watch *1
2. 4pin magnetic US8 charging data cable”1
3. Wiiwatch Instruction Manual 1
4. Suction card pin1
5. Charging and charging compartment 1
6. Spin Micro interface charging data cable

First Boot

Press the power key for 2s, the watch will then show the boot screen, The first time you boot the watch it will take a bit longer to start, This is due to apps getting ready, Please, be patient and do not try to turn off the watch Once it finishes, you will be able to choose your preferred language, If you want to change the language you can do so going to Settings Language and input -> Language

Charging the watch

During the first use, it’s recommended to fully charge the battery to extend its longevity. Plug the watch dock to the supplied USB cable and use a computer or a wall charger to charge it. Then place the watch on top and it will automatically start charging

SIM Card Installation

1. Insert the two steel pins on the card ring or the bottom cover of the power bank into the corresponding two small holes in the SIM card cover
2. Rotate 15 clockwise
3. Hold the SIM card cover with a suction cup
4. Lift the bottom cover vertically with a suction cup
5. Insert the SIM card into the cardholder Pease note that this watch only supports Nano-SIM cards

Power Key Functions

• Long press to turn on the watch;
• Turn off the screen by pressing it once:
• If you are inside an app, press it once to go back;
• Long pressing the button for 2 seconds will open the power menu, allowing you to power off or reboot The watch, as well as open the recent app’s view or lo change between a square or round screen interface.
• If the watch has crashed, pressing the power button for 15 seconds will reboot it

Back function key

In the second level menu and below, short press the return key to return to the previous level menu.

Gesture control

• In the watch interface, sliding up wll bring up the pedometer interface, showing steps and distance during the week. Then, sliding to the left will show steps. distance and calories that day.
• In the watch interface, sliding down will show basic information (battery level. date and time, network information and Bluetooth status). Sliding to the left will show the quick toggle menu for WiFI, Bluetooth, rotation lock, brightness, etc. Continue to swipe left to enter the deaning/ music/ weather interface.
• In the watch interface, sliding left will show pending notifications.
• By slicing to the right from the watch interface, the main menu will pop up, Al apps are available there, Then, sliding one more time to the left you will access the sport menu

Round and square screen function

1. Most of the Android apps aren’t optimized to work on round screens and expect a device with a square screen. The main function of this feature is to make the
   interface smaler so that it fits in a square inside the round watch screen

2. To enable square screen mode, press the power button for 2 seconds until the power menu shows up. Then, press the round icon on the top of the screen and it will change to a square. You have successfully enabled square screen mode.

3. To disable square screen mode, press the power button for 2 seconds until the power menu shows up, Then, press the square icon on the top of the screen and it will change to a cider, You have successfully disabled square screen mode

Menu user guide

Watch Face

1. The main watch screen will show one of the many available watch faces.
2. By pressing and holding the screen you will enter the watch face settings mode
3. You can select or download any of the available watch faces to set it as your defaut one,
4. Custom watch face: Sliding left to the end and press the setting icon, click camera to capture now photo or click gallery to select existing picture as watch lace.

Applications list

The basic applications included are. Contacts, Phone, Messaging, Settings, Browser, Downloads, Calendar, Check, Gallery, Music, Sound Recorder, File Manager, Filness, Wealher, Voice Search. Play Store, Maps, Camera, Hearl Rate Monitor and Mobile Assistant. System optimization, App market

Main menu functions

Contacts

Add. sync and delete contacts. Before synchronizing the contacts, make sure Bluetooth is paired with your phone. Phone call history I contact list input the desired phone number and press the call icon. In the dialing interface, slide left to access the recent call history. In the call history interface, slide to the left to enter the contact ist and search the desired contact.

Messaging

Receive, read, reply and delete SMS messages,

Browser

You can browse the internet using a WiFi or 4G connection.

Download

All the files downloaded by the browser will be shown here,

Calendar

You can check the date, day and month of the year.

Clock/Timer/Stopwatch/Alarm

• You can check different time zones,
• Sliding to the left will et you access the different timer, stopwatch and alan interfaces

Gallery

• Click to enter the gallery. you will be able to browse photos and see all your pictures and videos.
• To delete an ie, open it and click it and click the trash bin icon to delete it.

Music

• You can play, pause, skip or repeat songs on the watch’s internal storage;
• Tap the volume icon to adjust it;
• By paring up Bluetooth headphones, you can play music through them;
• To add new songs, simply connect the watch to your computer and copy them to the device’s internal memory

Sound Recorder

• Touch the record icon to start recording. Touching it again will end the recording. giving you the option to either save or delete
• To play a recording, access the recordings list and choose the one you want to pay. To delete it, do a long press on it and click on delete.

File transfer

Connect the dock to the computer using the provided USB cable. Then. place the watch on the dock and go to SettingsConnectionUS and tap on Transfer files. A new device will appear on the computer, and you will be able to copy files to and from it. By opening the file manager, you will see the total and free memory space, By tapping again, you will access the filesystem where your files will be shown, From there, you will be able to see, modify, create or delete files and folders.

Multisport mode

Multi-sports mode includes running, walking, bike riding, basketball, and football ping-pong. badminton and rope skipping, When entering one of those modes you will be able to enter the target time, target kilometers, and target calories,

Weather

You wl need an active internet connection for it to work, Then, the local weather information will be updated automatically,

Camera

Click to enter to the camera and take pictures or videos. It’s recommended to put set the brightness to 100% to get better results.

Heart Rate

Before gelling in The heart rate menu, make sure you have your watch on your wrist. To get a good result, gently press the watch to your skin. Then, tap the screen to start the test and try not to move until the result appears on the screen.

Mobile assistant

You can use the remote-control functions (capture, music, file transfer, device search) by downloading the app Wiwatch 2 on your phone explained later)

Settings

Allows you to control different settings like sound, screen, main menu style connectivity, gestures, low power mode, language and input, date and time, factory reset, uninstall apps, and more,

Sound

Here you can choose the ringtone, alarm sound, volume levels, etc.

Display

• Brightness and screen timeout settings are available here.
• Do not open always time if not needed, as it would consume the standby time.

App list stye

You can choose between a menu with an arc shape or a normal list

Connect

Click on the connect icon to configure Bluetooth, wIFI, WIFI Hotspot, USB, Airplane Mode, GPS, Mobile data, etc.

Gestures

Enable or disable wrist gestures and pedometer auto-start on boot,

Language and Input

• Click on it to access the language configuration and choose the desired language. You can long-press the language bar and move it to the first row to change the default language.
• Click to access the virtual keyboard configuration. The keyboards installed by defaut are Android Keyboards. Google Pinyin and Voice input, You can choose which one you want to use.

Date and Time

• The date and time will automatically be updated when connected to the internet or using the GPS.
• To adjust the dale and lime manually, uncheck the “Automatic date and time”. You can also uncheck the “Automatic time zone” option. Finally, configure the date and time.

Factory reset

You can delete all device information and restore the device to a factory state.

Uninstall app

You can uninstall apps from the device, as well as stop apps installed by default.

About Watch

In the “About Watch menu you will be able to find the developer options as well as the status of the watch, model number, Android version and OTA updates.

OTA updates:
Before the update, make sure the watch is at least 50% charged, The updates will ony be available via WiFi, To avoid errors, we recommend not using the watch during this process, Once the update has finished, the watch will restart automatically, This can take more than 10 minutes, don’t power off the watch, be patent, Once you see the home screen, the update we have finished.

Download and install WiiWatch 2

• For Android users: the app is supported on Android 7,0 and later, To check your Android version, go to Settings About phone
• For ioS users: the app is supported on ios 11,1 and better. To check your i0S version, go to Settings- General-> Information

Method 1: Get WiiWatch 2 for iPhone and Android users:

Mobile Assistant Scan the QR code to download and install the app on your phone.

Method 2: get WiiWatch 2 for Android users:

Search “WiiWatch 2” on Google Play and download the app.

Method 3: get Wiiwateh 2 for iPhone users:

Search “WiiWatch 2” in the AppStore and download the app.

Mobile Assistant connection with WiiWatch 2

1. Enable Bluetooth both on your watch and your phone,
2. Scan the QR code shown in the watch with WiWatch 2. Once it’s connected successfully the Bucktooth pairing interface will show up. Finally, WiiWatch 2 wl display all the watch information
3. Once the watch is connected, various functions can be used, such as music control, device search, calls and notifications via Bluetooth, etc.
4. Press on Heath inside Wiwatch 2 to display the current exercise data, as well as current and previous health rate values stored on the watch,
5. Click sports interface to switch sports mode freely.
6. Click clock face to download new clock faces in your watch; downloading dock faces from phone is not supported for 10S.

APP notification reminder setting

1. Allow WiWatch 2 to send you notifications on the phone, or you would not receive any notifications.
2. Enter settings on the phone, find power saving mode, allow Wiiwatch 2 to run in the background.
3. If installed Ant-virus software on the phone, find Wiiwatch 2 on the software and allow it to run in the background.

Tips

• The charging base is magnetic, Please, make sure it’s clean and free of objects before charging the watch.
• The battery can’t be removed. Due to the internal power drain of the watch, it could empty the battery if it’s not used for a long time. To avoid it, try charging the watch at least once a week
• If the watch hasn’t been used in a long time, it could have discharged itself. In that case, you should wait at least 10 minutes after plugging in the watch for it to recover a nomad state. It’s recommended to use a 5v 1A USB wall charger.
• Bad use of the device could cause it to hang. To restart the watch, keep pressing the power button for at least 10 seconds until it shuts down.

You can also contact us through KirinX official forum, Facebook,after-sales service email, etc. Our engineers will provide you with the necessary technical support

http:/bbs,ckyrindigi.com
CkyrinWatches.official
www.ckyrindigi.com
aftc-saks@ ckyrinwatoh.com
Headquarters: GuangChang Building 1012, BaoMing Road, BaoAn District, Shenzhen City, PRC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>