Suprema AP-M AIRFOB patch User Manual
- June 5, 2024
- suprema
Table of Contents
Suprema AP-M AIRFOB patch
Safety Precaution
Before using Airfob Patch, review the User Guide included in this caution book and support.mocalnc.mrn. Retain documentation for future referenc.e. Please use Airfob Patch correctly and be cautious of the fol lowing warnings to prevent danger or property damage.
Warning
Violating the instructions could result in serious injury or death.
Installation
- Do not install where there is direct sunlight, moisture, dust, or soot.
- It may cause fire or electric shock.
- Do not install in places where heat is generated by such as electric heaters.
- It may cause fire or electric shock.
- Install in places where there is not much moisture or water.
- It may cause product damage or electric shock due to moisture.
- Install in places where there is no electromagnetic interference.
- It may cause fire or electric shock.
- Do not self-repair Airfob Patch at user’s discretion.
- It may cause fire, electric shock, or injury.
- If the product is damaged due to installation or repair carried out on his or her discretion, repair service is not available free of charge .
caution
Violation of the instructions may cause minor injury or product damage.
Installation
- Do not install near strong magnetic objects such as lVs, (especially CRT) monitors, speakers, and magnets.
- It may cause malfunction of the product.
- Apply with sufficient farce so that the double -sided tape on the back of the product adheres to the surface of the access control card reader.
- It may cause the product to fall.
- Do not attach the product if there is a trace of use on the double-sided tape or trace of removal of its protective film.
- It may cause the product to fall.
Utilization
- Do not drop or apply shock on Airfob Patch.
- It may cause malfunction of the product.
- When deaning Airfob Patch, wipe it with a soft dry cloth and DO NOT use water, benzene, or alcohol.
- It may cause malfunction of the product.
- Do not reuse double-sided tape.
- If recycled, double-sided tape may lose adhesiveness and may be detached from the reader due to the impurities on its surface.
- Do not detach Airfob Patch from the surface of the access control card reader with strong force.
- It may cause malfunction of the product.
Product Size
Note
To reboot, detach Airfob Patch fir:st from the ac:x:ess control card
reader. See rebootAirfob Patch below.
Installation Scenario
- Perform the RF Device Output Test and Power Test of the Airfob Patch.
- Attach Airfob Patch on the access control card reader with double-sided adhesive tape.
- If Registering Device is successful after installing the app, setup process is completed.
- After attaching, Airfob Patch operates without additional power supply.
Check Attaching Position
RF Device Output Test and Power Test
- Position Airfob Patch on the access control card reader so that they touch each other.
- Check if Airfob Patch LED is blinking green fast.
- Check if the card access signal generated by Airfob Patch is recognized by the access control card reader and the operational sound is heard 5 consecutive times.
- When Airfob Patch is powered on, it generates the same access card signal as physical proximity card 5 consecutive times.
- Attach the double-sided adhesive tape on the back of Airfob Patch, making transparent film face outward, and then remove the transparent protective film.
- Attach Airfob Patch on the access oontrol card reader.
- Move onto the Registering Device step.
- If you have not heard five consecutive access operational sound on the access control card reader. RebootAfrfob Patch
- Detach Airfob Patch from the access control card reader.
- When powered off, Airfob Patch LED will blink red for about 6 seconds and eventually turn off.
- Check if Airfob Patch has been powered off and start the process again from step 1.
- If Airfob Patch blinks in red LED, Reposition Airfob Patch
- Reposition Airfob Patch on the access oontrol card reader to a different position where the LED flashes green. @ If the power strength is strong, LED will flash every 0.5 second or 1 second.
- If you have repositioned Ai rfob Patch to another location, reboot Airfob Patch.
Note
Airfob Patch does not require an additional power supply. Attaching it on access control card reader will power on the device. If the access control card reader does not recognize access card signal from Airfob Patch, see If Access Control card Reader Does Not Reoognize Airfob Patch. Be careful when attaching Airfob Patch with double-sided adhesive tape. Reusing the double- sided tape can be difficult See Safety Precautions above when installing.
Registering Device
- Install Airfob Pass app on the smartphone.
- Enable Bluetooth on your smartphone OS settings.
- Tap Device Registration, on Settings to register a device on the Airfob Pass app.
- Sign-in Airfob Portal using the app.
- Hold the smartphone near Airfob Patch as close as 10cm and tap Device Registration on the app.
- Complete registration by selecting Airfob Patch. You can find the device on the registered device list.
- Tap the Sign Out icon on the top right corner to sign out.
- Download the mobile acx:ess card on the app by requesting Airfob Portal administrator to issue a card from the site where the device is registered.
- Tap the smartphone on the access control card reader and check if valid access has been granted.
Note
If Airfob Patch is registered, the mobile access card must be downloaded on the Airfob Pass app and the smartphone must be tapped on the access control card reader to hear the access operational sound. Device registration can fail due to Bluetooth instability or wireless interference. If fails to register, please try again.
If Access Control card Reader Does Not Remgnize Airfob Patch
-
Airfob Patch and access control card reader operate when the location of the RF coil of the access control card reader
and RF antenna match. -
If valid access is not granted by access control card reader when tapping the device with the smartphone, reposition or rotate Ai rfob Patch to find the position that works wel I.
-
The location and direction of Airfob Patch may vary depends on the access control card reader.
-
The operational scope of Airfob Patch may be small or large depends on the RF signal strength of the access control c.ard reader and the position and size of its RF coil.
Specification
Appendix
Disclaimer
-
The information on this manual is provided pertaining to the MOCA System product, Airfob Patch.
-
The right to use is limited to products included in the terms and cnnditions of the sales agreement and guarantees by MOCA System. Any other intellectual property rights covered in this manual are not recognized.
-
MOCA System assumes no warranty or liability in respect to the sales or use of MOCA System products for the suitability and commerciality of products for specific purposes, infringement of patents, copyrights, and other intellectual property rights.
-
Do not use MOCA System products in medical, lifesaving, life-sustaining situations, or in situations where a product malfunction can result in personal injury or death. If an accident occurs while the product is used in the above example, MOCA System employees, subsidiaries, branch offices, affi Ii ates, distributors wil I not be responsible for and wil I not reimburse for any direct or indirect expenses or expenses related, including attorneys’ fees, even if defect is
found in the design or production process of the product or even if it is claimed as an important negligence. -
MOCA System may change product specifications and specification dorument any time without proper notice to improve product stability, functionality and design. Designers should keep in mind that features or descriptions marl<ed ‘to be implemented’ or ‘not defined’ a re always subject to change. MOCA System wil I implement or define these in the
not-too-distant future, and is not responsible for any problems that may arise as a result, including compatibility issues. -
If you wish to obtain the most up-to-date specifications prior to ordering your product, please contact MOCA System, your MOCA System sales representative, or your lac.al distributor.
Copyright Notice
This dorument is copyrighted by MOCA System. Rights to other product names,
trademarks, and registered trademarks belong to the individuals or
organizations that own them. \
compliance information
Copyright notice
The copyright of this document is vested in Suprema. The rights of other
product names, trademarks and registered trademarks are vested in each
individual or organization that owns such rights.
Warning & Safety Information
Safety Symbols
Warning
When encountering this symbol in the manual, you must folow these
recommendations to avoid imeparable damage to your car, system or connected
devices or to avoid accidents with injuries or death.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is Subject to the following two conditions
- this device may not cause interference, and
- this device must accept any interference, including interference
The antenna(s) used for this device must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating inconjunction with any other antenna or transmitter.
FCC Information
This device comples with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmtul interference, and
- This device must accept any intertference received, including interference that may cause undesired operation.
FCC notification to users
This equipment has been tested and found to comply with the limits for a CLASS
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against hamful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, it not installed and used in
accordance with the instructions, may cause hammful interfe rence to radio
communications. However, there is no guarantee that interference will not
occur in a particular instalaion. If this equipment does cause harmful
interference, the user is encouraged to try to corect the interference by
consulting with a deaker or an experienced technician for technical
assistance.
Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user’s authority to operate the equipment.
Appendix
Escape clause
- The information in this manual is provided with regard to the Suprema’s products.
- The right to use is acknowledged only for products included in the terms and conditions of the sales agreement guaranteed by Suprema. The right of license to other intellectual property rights not discussed in this manual is not acknowledged.
- Suprema does not guarantee or hold responsibility for the suitability and commerciality of the product for a specific purpose, or the infringement of patent, copyright, or other intellectual property rights with regard to sales or usage of Suprema’s products.
- Do not use the product of Suprema under the situations related to medical, rescue of human lives, or maintenance of life, as a person may get injured or lose his/her life due to product malfunction. If an accident occurs while a consumer is using the product under the situations described as examples above, employees, subsidiaries, branches, affiliated companies and distributors of Suprema do not accept responsibility nor will they reimburse for all related direct and indirect expenses or expenditure including attorney fees even if the consumer has discovered any shortcomings in the product design or manufacturing process and claims this as a significant fault.
- Suprema may modify the product size and specifications at any time without proper notice in order to improve the safety, function and design of the product. Designers must keep in mind that functions or descriptions indicated as “to be implemented” or “undefined” may change at any time. Suprema will implement or define such functions or descriptions in the near future and Suprema accepts no responsibility for compatibility issues and any other problems arising from such compatibility issues.
- If you wish to obtain the newest specifications before ordering the product, contact Suprema through a Sales Representative or local distributor of Suprema.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>