Easy Touch Pte YH101 Temperature Wristband User Manual
- June 5, 2024
- Easy Touch Pte
Table of Contents
Easy Touch Pte YH101 Temperature Wristband
Preparation
Wear correctly
Wearing instructions
Please place the back (temperature sensor side) side close to the skin and adjust the strap to make it fit and comfortable
Temperature measurement
The temperature measurement needs a certain heat conduction time, and the temperature measurement results are based on the data after wearing the band for 5 minutes.
Equipment parameters
Key information
Size| Diameter: 33mm, thickness: 9mm
Band material| silica gel
Temperature sensor material| 316L stainless steel
| Weight | 20g |
|---|---|
| Waterproof level | IP67 |
| Temperature sensor | CT1711 |
| Temperature sensor accuracy | ±0.1°C |
| Battery | CR2032 |
| Standby time | The normal use time is more than 90 days |
| max output power | -2.651dBm |
Notes
- In case of discomfort or allergic symptoms, please stop using this product immediately;
- The use of substandard batteries will shorten the life of the equipment, or even damage the equipment;
- The band is designed according to IP67 standard to meet the daily waterproof requirements, such as hand washing, shower, etc., but it does not support swimming and diving.
Quality guarantee
This product has passed the quality inspection of our company, and its
performance parameters meet the technical standards, and are allowed to leave
the factory
Safety information
Before using the equipment, please read the following notes carefully to ensure the best performance of the equipment and avoid dangerous situations
Electronic equipment
Do not use this device in places where wireless devices are prohibited. It may interfere with other electronic equipment or cause other dangerous situations (such as pacemaker, cochlear implant, hearing aid, etc.). If you use these medical devices, please contact their vendors about the restrictions on using this device.
Environment notes
- Do not place the equipment and its accessories with flammable liquids, gases or flammable materials
- The temperature band includes battery. Please do not put the device close to the heat source or exposed fire, otherwise it may cause fire or explosion of the battery
- Do not let children or pets bite the equipment and its accessories, so as to avoid injury or equipment failure
FCC Caution.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.