Wantai Future Electronic Technology F1 Bluetooth Speaker Instruction Manual

Wantai Future Electronic Technology F1 Bluetooth Speaker

OPEN THE BOX

Please make sure the following accessories are safe

• a. a Bluetooth speaker
• b. USB Cable
• C. a user manual
• d. a 3.5mm audio cable

FUNCTIONS

• Built-in Bluetooth
• Built-in lithium battery
• TF card /SD Play (MP3)
• 3.5MM line output jack
• TWS function
• IPX6 water insistence

Technical parameter

• Output Power: RMS 5W
• Speaker Size: 2″ 4Q*1
• R. Frequency: 2402-2480 MHZ
• S/N Ratio: 86db
• Lithium Battery 3.7V 800mAh
• Playtime (80% Volume) : 2 Hours
• Charging Time: 2 Hours
• Dimension: 150.96 80.99*80.35mm

OPERATION

Once open the speaker, it will turn to Bluetooth directly. Double click “M” switch to IF /SD mode, double click “M” switch to Aux-in Play/ pause: short press “M” button for play or pause music. “+”: Short press for Volume Up, long press for Next song : Short press for Volume down, long press for previous song TWS: Turn two-speaker on, then double click one speaker “-” for TWS connect You will hear the voice prompt means TWS connects successfully. You can connect one Bluetooth from one of them to start Turn on/off: Long press U for turn on or turn off.

AVOIDING WATER
The product should not be subjected to water or water splashing, should not be placed in some objects such as vases filled with liquid Keep the product away from vases, buckets, wash bowls. If the liquid poured into the product

HIGH TEMPERATURE OR HUMIDITY

• Do not use the product which be placed in high-temperature environment (such as an ignition source, oven or similar environment)
• Do not use the product which be placed in very humid or steam-filled environment
• When you move the product from a cold environment to a hot environment, if the product interior
• already with moisture, will not work. At this time, turn on the power to wait for about an hour,it can work normally after all moisture evaporation.

TWS Function-One Phone with Two Speakers for Stereo Sound

1. Power on speaker A
2. Turn your phone Bluetooth on, pair and connect to the Bluetooth speaker. The device will be listed in Blue text under the topic PARED DEVICES.
3. Power on speaker B, double press button then speaker B can connect to your phone at the same time

The device can be used in portable exposure conditions without restriction.

Attention:
Our company retained the pOwer that change the design and specifications for improving the product.
Please kindly understand that we will not notice in further.

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning:
Changes or modifications made to this device not expressly approved by Wantai Future Electronic Technology (Guangzhou) Company Limited may void the FCC authorization to operate this device.

Note:
The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>