Shenzhen S66 Touch sound Lamp User Manual

S66 Touch sound Lamp
**User Manual

**

Operation Image

Playing time after fully charged:

10 hours music playing for normal 70% volume,10 hours lighting lamp on the highest brightness
Power switch:
long press **to turn it on or off. The speaker will first enter Bluetooth Mode; Press Mode switch to turn on Lighting Mode when the speaker is on, and the light will be on by soft touch. Bluetooth Mode will instantly switch when clicking the Mode button icon (TF Card Music Playing will automatically switch when inserting the TF card). Voice Prompts will sound before Bluetooth pairing and TF card music playing
Button icon:
2, Bluetooth music mode:**

Short press ” ” to play the next song and long press to volume up.
Short press “ ” to play the previous song and long press to volume down.
3, Hands-free calling:
Answer and hang up the phone:
There will be an alert sound from the speaker when there is a phone call. Click “ to answer the call, and click “ )” again to hang up.
4, TF card music playing:
Enter TF card music playing mode automatically when TF card is inserted
Short press “ “to play the next song and long press to volume up.
Short press ” “to play the previous song and long press to volume down.
Music playing or pause by click:
Bluetooth mode will switch by clicking the MODE button when on TF card music playing mode
5, AUX-IN audio input mode:
Inserting the 3.5 mm aux-in cable, the speaker can be external audio when connected with a mobile phone, PC, tablet, or mp3.
In Aux-in audio input mode, “ to volume up,” ” to volume down, other buttons are out of use. In any mode, when inserting a 3.5 mm audio-in cable, the speaker self-identifies and automatically switches to audio in input mode.
Indicator light:
1, Bluetooth indicator:

The Bluetooth indicator light will flash rapidly when in impairing state, the blue light flashing slowly means Bluetooth is connected, and the speaker enters Bluetooth music playing.
2, TF card music playing indicator:
The speaker enters TF card music playing when blue indicates a light flash in TF card playing mode
3, Charging:
1, Please make sure the speaker is fully charged on first use. Charge the speaker with the provided USB cable which is compatible with any computer or cell phone 5 V output charger. The charge indicator light will be red while charging, then when the battery is fully charged it will turn off. 2, Charge time: about 4 hours Bluetooth mode:
1, Bluetooth connection:
This speaker supports the Bluetooth device with the A2DP function. Slide the power switch first, then enter Bluetooth mode, BlueTooth indicate a blue flicker alternately, together with voice prompts, the speaker is in impairing state at this moment, and only in the state Bluetooth can be impaired and connected successfully.
2, Mobile phone connection:
Step 1: Open the Bluetooth setting on your phone or tablet and click “search device”. !phones will search for Bluetooth devices automatically.
Step 2: You have found the Bluetooth speaker when the screen displays the character ” “, click on it on your device to pair the connection.
Step 3: Enter”0000″ and click OK if there’s a prompt that requires you to enter a password.
Step 4: The phone or tablet will indicate when the pairing is successful. The character on the display of the speaker will stop flickering.
3, Computer connection:
Activate the BlueTooth function first if the computer has a BlueTooth device. It’s necessary to install the BlueTooth driver and plug in the Bluetooth adapter when there is no Bluetooth available
Step 1: Click the Bluetooth icon at the lower right of the computer by mouse right button, choose” device adding”
Step 2: Bluetooth adapter will search for the speaker automatically, and the screen displays the character
Step 3: The computer will install the driver automatically after double dick the character ” “, and display the driver install successfully.
Step 4: Double-click the Bluetooth icon, and the speaker connects to the computer successfully and is in use. Please check if the computer audio device has switched to Bluetooth mode or connected well if the speaker still can not play music successfully.

Bluetooth pairing and connection

1. If the speaker has been connected with Bluetooth devices before, it will connect with the last Bluetooth device automatically once it is turned on.
2. 1f the speaker has not been connected with Bluetooth devices before, it will enter Impairing mode, and click connecting is achievable
3. 0ther phones or tablets can not be connected with the Bluetooth speaker when the speaker Is being connected with a phone or tablet.
4. The phone or tablet can not be connected with the Bluetooth speaker if it is connected with other Bluetooth devices. You should turn off your Bluetooth connection and connect your phone with the Bluetooth speaker again.

Lamp function

Long press the switch of the speaker on the bottom. Turn on the light by tapping the mesh on the top, and the lamp will light on in the dimmest grade one. The brightness can be adjusted by tapping the top mesh, and there are 3 brightness grades: low brightness, intermediate brightness, and high brightness. Tapping the top mesh when in high brightness, the light will be off.

Frequently Asked Questions

sure it is in the searching state or reboot the speaker.
2. Connection is difficult when there are too many Bluetooth devices nearby. Turn off other Bluetooth devices.
3. Turn off the Bluetooth device that was connected with the Bluetooth speaker last time, and reconnect the speaker.
Muted or distorted sound| 1. Check the volume of your phone or the speaker, and adjust the volume.
2. The battery is low. Please charge it.
Choppy music play| 1. Check if the device is beyond the effective connection distance.
2. Check if there is any obstacle between the speaker and your device.
The indicator not shining in Bluetooth mode| 1. The battery is low. Please charge it.
2. Please reboot the speaker.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1.  This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>